Vertical System |
| Analog Bandwidth @ 50 Ω (-3 dB) | 1 GHz |
| Rise Time (typical) | 400 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 25 MHz; 200 MHz |
| Input Impedance | 50 Ω or 1 MΩ || 15 pF; 10 MΩ || 11 pF with PP005A Probe |
| Input Coupling | 1 MΩ: AC, DC, GND; 50 Ω: DC |
| Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 100 V max. (peak AC: ² 5 kHz + DC) |
| Channel-Channel Isolation | 250:1 at same V/div setting, 40:1 at 3 GHz |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50 Ω: 2 mV–1 V/div, fully variable; 1 MΩ: 2 mV–2 V/div, fully variable |
| DC Gain Accuracy | ±1.5% of full scale; (±1% typical) |
| Offset Range | 50 Ω:
±700 mV @ 2–4.95 mV/div
±1.5 V @ 5–100 mV/div
±10 V @ 0.102-1 V/div
1 MΩ:
±700 mV @ 2–4.95 mV/div
±1.5 V @ 5–100 mV/div
±20 V @ 0.102–2 V/div
|
| Offset Accuracy | ±(1.5% of full scale + 0.5% of offset value + 2 mV) |
| |
Horizontal System |
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 200 ps/div–10 s/div; RIS mode: to 20 ps/div; Roll mode: up to 1000 s/div |
| Clock Accuracy | <= 10 ppm |
| Time Interval Accuracy | <= 0.06 / SR + (10 ppm * Reading) (rms) |
| Jitter Noise Floor | 1 ps rms @ 100 mV/div (typical) |
| Trigger Jitter | 2.5 ps rms (typical) |
| Sample Rate and Delay Time Accuracy | ±5 ppm ² 10 s interval |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Clock Frequency | 30 MHz–1 GHz; 50 Ω impedance; applied at the auxiliary input |
| |
Acquisition System |
| Single-Shot Sample Rate/Ch | 10 GS/s |
| 2 Channel Max | 20 GS/s |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals: to 20 ps/div, Upper time/div limit function of sample rate and memory length settings |
| Maximum Trigger Rate | 150,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | <= 6 µs |
| Maximum Acquisition Memory Points/Ch | 10M / 20M |
| Acquisition Memory Options - Option XL | 24M / 48M |
| Acquisition Memory Options - Option XXL | 50M / 100M |
| Acquisition Memory Options - Option VL (4 Ch / 2Ch) | 16M / 32M |
| Segments (Sequence Mode) - Standard | 5000 |
| Segments (Sequence Mode) - Option VL | 10,000 |
| Segments (Sequence Mode) - Option XL | 20,000 |
| Segments (Sequence Mode) - Option XXL | 25,000 |
| |
Acquisition Modes |
| Averaging | Summed or continuous averaging up to 1 million sweeps |
| Enhanced Resolution (ERES) | (ERES) From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation | Linear or Sin x/x |
| |
Triggering System |
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, External, Ext X10, Ext/10, or line; slope and level unique to each source (except line trigger) |
| Coupling | DC |
| Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay | 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time | 2 ns to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range | ±5 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) | 1 div < 750 MHz |
| External Trigger Sensitivity, (Edge Trigger) | 2 div < 1 GHz |
| Max. Trigger Frequency, SMART Trigger | 750 MHz |
| |
Basic Triggers |
| Edge | Triggers when signal meets slope (positive or negative) and level condition. |
| |
SMART Triggers |
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 2 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input. Each source can be high, low, or don’t care.The High and Low level can be selected independently. Triggers at start or end of the pattern. |
| |
SMART Triggers with Exclusion Technology |
| Glitch and Pulse Width | Triggers on positive or negative glitches with widths selectable from 600 ps to 20 s or on intermittent faults
(subject to bandwidth limit of oscilloscope)
|
| Signal or Pattern Interval | Triggers on intervals selectable between 2 ns and 20 s. |
| Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 2 ns to 20 s, or 1 to 99,999,999 events. |
| Exclusion Triggering | Trigger on intermittent faults by specifying the normal width or period. |
| |
Color Waveform Display |
| Type | Color 10.4" flat-panel TFT-LCD with high resolution touch screen |
| Resolution | SVGA; 800 x 600 pixels |
| Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces |
| Grid Styles | Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY |
| Waveform Representation | Sample dots joined or dots only |
| |
Internal Waveform Memory |
| Internal Waveform Memory | M1, M2, M3, M4 Internal Waveform Memory (store full-length waveforms with 16 bits/data point)
or store to any number of files limited only by data storage media |
| |
Automatic Setup |
| Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals. |
| Vertical Find Scale | Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range. |
| |
Probes |
| Probes
| (4) PP005A ÷10, 10 MΩ passive probes |
| Probe System: ProBus | Automatically detects and supports a variety of compatible probes |
| Scale Factors | Automatically or manually selected depending on probe used |
| |
Analog Persistence Display |
| Analog and Color-Graded Persistence | Variable saturation levels; stores each trace’s persistence data in memory. |
| Trace Selection | Activate persistence on all or any combination of traces |
| Sweep Display Modes | All accumulated, or all accumulated with last trace highlighted |
| Persistence Selections | Select analog, color, or three-dimensional |
| Persistence Aging | Select from 500 ms to infinity |
| |
Processor/CPU |
| Processor Type | Processor Intel® Pentium® 4 @ 2.54 GHz (or better) with Microsoft Windows® XP Professional |
| Processor Memory | Up to 2 Gbytes |
| Real Time Clock | Dates, hours, minutes, seconds displayed with waveform
SNTP support to synchronize to precision internet clocks |
| |
Zoom Expansion Traces |
| Zoom Expansion Traces | Display up to 4 Zoom and 4 Math/Zoom traces; 8 Math/Zoom traces available with XMAP (Master Analysis
software package) or XMATH (Advanced Math software package) |
| |
Setup Storage |
| Setup Storage | Store to the internal hard drive, over a network or to a USB-connected peripheral device |
| |
Interface |
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| GPIB | Supports IEEE – 488.2 |
| Ethernet (LAN) | 10/100Base-T Ethernet interface |
| USB (Host) | USB 2.0 ports support Windows compatible devices |
| External Monitor Port | Standard 15-pin D-Type SVGA-compatible |
| Parallel Port | 1 standard |
| |
Auxiliary Input |
| Signal Types | Selected from External Trigger or External Clock input on front panel |
| Coupling | 50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage | 50 Ω: 5 Vrms; 1 MΩ 250 V (Peak AC < 10 kHz + DC) |
| |
General |
| Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum |
| Power Requirements | 100–120 VAC at 50/60/400 Hz; 200 –240 VAC at 50/60 Hz; Automatic AC Voltage selection
Max. power consumption: 650 W/650 VA |
| |
Environmental and Safety |
| Temperature (Operating) | +5 °C to +40 °C including CD-ROM drives |
| Temperature (Non-Operating) | -20 °C to +60 °C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +30 °C
Upper limit derates to 25% relative humidity (non-condensing) at +40 °C |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) | up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) | 0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Random Vibration (Non-Operating) | 2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative)
in each of three orthogonal axes, 18 shocks total |
| |
Physical Dimensions |
| Dimensions (HWD) | 264 mm x 397 mm x 491 mm; 10.4" x 15.6" x 19.3" (height excludes feet) |
| Weight | 18 kg; 39 lbs. |
| Shipping Weight | 24 kg; 53 lbs. |
| |
Certifications |
| Certifications | CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 3111-1, and CSA C22.2 No. 1010.1 |
| |
Warranty and Service |
| Warranty and Service | 3-year warranty; calibration recommended annually
Optional service programs include extended warranty, upgrades, and calibration services |
| |
