|
|
|
WaveRunner 204Xi-A
2 GHz, 4ch, 5 GS/s, 12.5 Mpts/Ch (10 GS/s, 25 Mpts/Ch in interleaved mode) with 10.4'' Color Touch Screen Display
The LeCroy WaveRunner Xi-A is the most powerful and capable scope available in its class. Basic system validation using advanced triggers, fast viewing modes, measurement parameters, or serial decodes is simple and easy. Advanced debug, multi-domain analysis, and waveshape analysis are possible with tools unique to WaveRunner Xi-A. Optional application packages help you make sense of well-defined problems. Enhanced Understanding of Serial Data Signals  Trigger on I2C, SPI, UART, RS-232, AudioBus (I2S, LJ, RJ, TDM), LIN, CAN, or FlexRay or MIL-STD-1553 serial data patterns. Intuitively decode values on the oscilloscope grid.
Powerful Triggers Isolate Events  An extensive collection of SMART, Serial, and Digital (MS Series) triggers enables users to quickly and easily isolate events of interest (some optional).
WaveStream™ Fast Viewing Mode  Use the high sampling rate and WaveStream fast viewing mode to characterize signal shape, rise time, overshoot, etc., and verify the presence or absence of high-speed transients.
Advanced Acquisition Modes  Sequence Mode allows you to partition your acquisition memory into segments and capture specific events over long periods of time. Then, view and analyze each segment individually.
WaveScan™ Advanced  Search and Analysis WaveScan provides the ability to locate unusual events in a single capture, or scan for an event in many acquisitions over a long period of time using more than 20 different search/scan modes. Use ScanHisto or ScanOverlay to display intuitive scanned results.
Completely Customizable Quickly create your own measurement parameters or math functions using Excel, MATLAB®, or VBScripts (some capability optional). Advanced Application Packages  Use a variety of application packages to provide detailed, fast solutions for specific problems.
Fast Long Memory with Front Panel Zoom Controls WaveRunner Xi-A's long memory is optimized for calculation of more information 10–100x faster than other oscilloscopes, while enabling easy access to simple zooming and positioning from the front panel. Extensive Math and Measurement Capability More standard and optional measurements and more powerful math capability are provided with results returned faster than in other oscilloscopes. Beyond Time Domain Analysis  Amplify your understanding with multidomain analysis of your signals. Convert signal information into Statistical domain (Histogram), Spectral domain (long memory FFTs), Jitter, Modulation, or other Measurement Parameter domains (Tracks of measurement parameters). (Some capability is optional.)
Integrated Tool Sets  LeCroy math, measure, and analysis tools are tightly integrated with basic scope operations. It's easy to link capabilities and expand understanding. Free yourself from constraints!
Complete Probing Solutions A wide variety of active FET probes, current probes, differential probes, HV probes, etc. with complete tip and ground accessories make it easy to probe your signals. Mixed Signal Oscilloscope Option The MS Series can capture digital signals with speeds up to 500 MHz. View up to 36 digital channels with up to 50 Mpts/Ch memory and analyze analog and digital events together. Power/Amplifier Measurements Excellent overdrive recovery and signal integrity make WaveRunner Xi-A ideal for high-voltage switching loss, conduction loss, ripple, switching power supply, and other amplifier measurements. Use with LeCroy Differential Amplifiers for highperformance 100,000:1 Common Mode Rejection Ratio. Timing Characterization Extensive triggers allow fast event isolation. Measure timing statistically and view behavior graphically using histograms. Gain real understanding of root cause. Slow/High-speed Signal Mix Long memory, HFREJ trigger coupling, built-in noise filtering, etc. enable fast understanding of signal behavior in circuits with a mix of slow-speed (sensor, actuator, power supply, mechanical) and high-speed signals.
Vertical System | | Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div | 2 GHz | | Rise Time (typical) | 180 ps | | Input Channels | 4 | | Bandwidth Limiters | 20 MHz; 200 MHz | | Input Impedance | 1 MΩ || 20 pF or 50 Ω | | Input Coupling | 50 Ω: DC, 1 MΩ: AC, DC, GND | | Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz) | | Input Connector | ProBus/BNC | | Vertical Resolution | 8 bits; up to 11 with enhanced resolution (ERES) | | Sensitivity | 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable | | Offset Range | ±400 mv@2–4.95 mv/div, ±1 V@5–99 mv/div, ±10 V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div; 1 M O: ±400 mv @ 2–4.95 mv/div, ±1 V @ 5–99 mv/div, ±10V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div | | | Main Specifications | | Probes | One PP007 per channel standard; Optional passive and active probes available. | | | Timebase System | | Roll Mode | User selectable at <= 500 ms/div and <= 100 kS/s | | | Horizontal System | | Timebases | Internal timebase common to all input channels; an external clock may be applied at the auxiliary input | | Time/Division Range | Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div | | Clock Accuracy | <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C) | | Trigger Jitter | Jitter <=3 ps rms (typical) | | Sample Rate and Delay Time Accuracy | Equal to Clock Accuracy | | Channel-Channel Deskew Range | ±9 x time/div setting, 100 ms max., each channel | | External Sample Clock | DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies) | | | Acquisition System | | Single-Shot Sample Rate/Ch | 5 GS/s | | Interleaved Sample Rate (2 Ch) | 10 GS/s | | Random Interleaved Sampling (RIS) | 200 GS/s | | RIS Mode | User selectable from 100 ps/div to 10 ns/div | | Maximum Trigger Rate | 1,250,000 waveforms/second | | Acquisition Memory Options | Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode) | | Sequence Time Stamp Resolution | 1 ns | | Standard Memory | 12.5M/25M 10,000 | | | Acquisition Modes | | Averaging | Summed and continuous averaging to 1 million sweeps | | Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution | | Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps | | Interpolation | Linear or (Sinx)/x | | Time Resolution (min, Single-shot) | 100 ps (10 GS/s) | | | Triggering System | | Trigger Modes | Normal, Auto, Single, Stop | | Sources | Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line | | Coupling | DC, AC (typically 7.5 Hz), HF Reject, LF Reject | | Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments, or 100 ns) | | Post-trigger Delay | Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode | | Hold-off by Time | 1 ns to 20 s or 1 to 1,000,000,000 events | | Internal Trigger Range | ±4.1 div from center (typical) | | Trigger Sensitivity with Edge Trigger (Ch 1–4) | 2 div @ < 2 GHz 1 div @ < 200 MHz | | External Trigger Input Range | EXT/10 ±4 V; EXT ±400 mV | | Max. Trigger Frequency, SMART Trigger | 2 GHz @ = 10 mV | | Minimum Time Between Sequential Segments Sequential Segments | 800 ns | | | Basic Triggers | | Edge | Triggers when signal meets slope (positive, negative, or Window) and level condition. | | TV-Composite Video | Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines). | | | SMART Triggers | | State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. | | Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. | | Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa | | | SMART Triggers with Exclusion Technology | | Glitch and Pulse Width | Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope). | | Signal or Pattern Interval | Triggers on intervals selectable between 1 ns and 20 s. | | Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. | | Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s. | | Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s. | | Exclusion Triggering | Trigger on intermittent faults by specifying the normal width or period. | | | Color Waveform Display | | Type | Color 10.4" flat-panel TFT-LCD with high resolution touch screen | | Resolution | SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels | | Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces. | | Grid Styles | Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY | | Waveform Representation | Sample dots joined or dots only in real-time mode | | | Internal Waveform Memory | | Internal Waveform Memory | M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media. | | | LeCroy WaveStream™ Fast Viewing Mode | | Intensity | 256 Intensity Levels, 1–100% adjustable via front panel control | | Number of Channels | up to 4 simultaneously | | Max Sampling Rate | 5 GS/s (10 GS/s for WaveRunner 62Xi-A, 64Xi-A, 104Xi-A, 204Xi-A in interleaved mode) | | Waveforms | up to 8000 waveforms/second | | Operation | Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode | | | Automatic Setup | | Auto Setup | Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals. | | Vertical Find Scale | Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range. | | | Probes | | Probe System: ProBus | Automatically detects and supports a variety of compatible probes. | | Scale Factors | Automatically or manually selected, depending on probe used | | | Setup and Waveform Storage | | Front Panel and Instrument Status | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. | | | Zoom Expansion Traces | | Zoom Expansion Traces | Display up to 4 Zoom/Math traces with 16 bits/data point | | | Interface | | Remote Control | Via Windows Automation, or via LeCroy Remote Command Set | | GPIB | Supports IEEE – 488.2 | | Ethernet (LAN) | 10/100/1000Base-T Ethernet interface (RJ-45 connector) | | USB (Host) | 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices. | | External Monitor Port | Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution. | | Serial (RS-232) | DB-9 RS-232 port (not for remote oscilloscope control) | | | Auxiliary Input | | Signal Types | Selected from External Trigger or External Clock input on front panel | | Coupling | 50 Ω: DC, 1 MΩ: AC, DC, GND | | Maximum Input Voltage | 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 5 kHz) | | | Auxiliary Output | | Signal Types | Trigger Enabled, Trigger Output. Pass/Fail, or Off | | Output Level | TTL, ˜3.3 V | | Calibrator Signal | Output available on front panel connector provides a variety of signals for probe calibration and compensation. | | | General | | Auto Calibration | Ensures specified DC and timing accuracy is maintained for 1 year minimum. | | Power Requirements | 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A | | | Environmental and Safety | | Temperature (Operating) | +5 °C to +40 °C | | Temperature (Non-Operating) | -20 °C to +60 °C | | Humidity (Operating) | Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C | | Humidity (Non-Operating) | 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F | | Altitude (Operating) | Operating Up to 2,000 m | | Altitude (Non-Operating) | Non-Operating 12,190 m | | | Physical Dimensions | | Dimensions (HWD) | 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6") | | Net Weight | 6.95 kg. (15.5 lbs.) | | | Certifications | | Certifications | CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04. | | | Warranty and Service | | Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services. | | |
Serial Data Compliance | QPHY-ENET
QualiPHY Ethernet Application Software | QPHY-USB
USB Application Software Package | ENET-2ADA-BNCSMA
2 x BNC to SMA Adapter | ENET-2CAB-SMA018
2 x 18 inch SMA to SMA Cable | ENET-2CAB-SMA036
2 x 36 inch SMA to SMA Cable | ET-PMT
Pulse Mask Test Package | WRXi-SDM
Serial Data Mask Package | TF-ENET-B
10/100/1000Base-T Compliance Test Fixture | TF-ET
Telecom Adaptor Kit 100Ω, 120Ω, 75Ω | TF-USB-B
USB 2.0 Testing Compliance Test Fixture | Remote Control/Network Options | WS-GPIB
USB2.0 to GP-IB IEEE488.2 Adapter | Serial Trigger and Decode | WRXI-SPIBUS TD
SPI Trigger and Decode Option | WRXI-I2CBUS TD
I2C Trigger and Decode Option | WRXi-UART-RS232BUS TD
UART and RS232 Bus Trigger & Decode Opt. for WRXi Oscilloscopes | WRXI-LINBUS TD
LIN Bus Trigger & Decode Opt. for WRXi Oscilloscopes | WRXI-FLEXRAYBUS TD
FlexRay Trigger and Decode Option | WRXi-FlexRaybus TDP
FlexRay Trigger, Decode and Physical Layer Test Option for WRXi | WRXi-CANbus TDM
CAN Trigger, Decode and Measure/Graph Option for WaveRunner Xi | WRXi-CANbus TD
CAN Trigger, Decode Option for WaveRunner Xi | WRXi-AudioBus TD
AudioBus trigger and decode for WaveRunner Xi | WRXi-AudioBus TDG
AudioBus trigger, decode, and graph for WaveRunner Xi | WRXi-1553 TD
MIL-STD-1553 Trigger and decode option for WaveRunner Xi | WRXi-DPHYbus D
D-PHY Bus Decode option for WaveRuner Xi/Xi-A | WRXi-ARINC429bus DSymbolic
ARINC 429 Bus Symbolic Decode option for WaveRunner Xi/Xi-A | WRXi-DigRF3Gbus D
DigRF 3G Bus Decode option for WaveRunner Xi/Xi-A | WRXi-PROTObus MAG
Serial Debug Toolkit - Measure Analyze Graph for WaveRunner Xi/Xi-A | WRXi-USB2bus D
USB 2.0 Bus Decode option for WaveRunner Xi/Xi-A | CANbus TD
LeCroy CAN Bus Trigger and Decoding Package | CANbus TDM
LeCroy CAN Bus TDM Trigger, Decoding and Measurement Package | CANbus TD 5LIC
LeCroy CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes | CANbus TDM-5LIC
LeCroy CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes | TC1041-OPTO
CAN 1041 opto-isolated high-speed trigger coupler | TC1050-OPTO
CAN 1050 opto-isolated high-speed trigger coupler | TC1054-OPTO
CAN 1054 opto-isolated low-speed trigger coupler | TC251-OPTO
CAN 251 opto-isolated high-speed triger coupler | TC5790c-OPTO
CAN 5790c opto-isolated single-wire trigger coupler | TC10011-OPTO
CAN B10011S opto-isolated truck and bus trigger coupler | Mixed Signal Solutions | MS-500
500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option | MS-500-36
250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option | MS-250
250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option | Mixed Signal Accessories | PK400-1
Large gripper probe set for 0.10'' (2.54 mm) pin pitch, includes 10 probes with color-coded leads | PK400-2
Medium gripper probe set for 0.04'' (1.0 mm) pin pitch, includes 10 probes with color-coded leads | PK400-3
Small gripper probe set for 0.008'' (0.2 mm) pin pitch, includes 10 probes with color-coded leads | MSO-MICTOR
Mictor Cable, D0-D35 | MSO-3M
3M Interconnect Cable, D0-D17 or D18-D35 | Jitter Analysis Software | WRXi-JTA2
Jitter & Timing Analysis Software | Other Software Options | WRXi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series | WRXi-EMC
EMC Software Option | WRXi-STAT
WaveRunner Xi Series Statistics Package | WRXi-XMATH
Advanced Math Package | WRXi-XDEV
Advanced Customization Package | WRXi-XMAP
Master Analysis Package (XMATH + XDEV + JTA2) | WRXi-XWAV
Intermediate Math Package | WRXi-XVAP
Value Analysis Package ( XWAV + JTA2) | WRXi-XWEB
Processing Web Editor for functions and parameters | Data Storage Software | WRXi-AORM
Advanced Optical Recording Measurements | WRXi-DDM2
Disk Drive Measurement Package | Power Analysis Software | WRXi-PMA2
Power Measure Analysis Software Package | Digital Filtering Software | WRXi-DFP2
Digital Fiter Package |
Current Probes | CP030
30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse | CP031
30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse | AP015
30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse | CP150
150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak Pulse | CP500
500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak | DCS015
Deskew Calibration Source for AP015 | Differential Amplifiers | DA1855A
DA1855A, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters | DXC100A
DXC100A, Selectable ÷100 or ÷10 , Passive Differential Probe Pair for DA18xxA series | DXC200
÷1,50 MHz low capacitance Passive Differential Probe Pair for DA18xxA series | DXC-5100
÷100 2.5KV Passive High Voltage Probe Pair for DA18xxA series. Requires DA101 for full performance | DA101
÷10 1MOhm Passive Attenuator for DXC series probes | DA1855A-PR2
2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters | DA1855A-PR2-RM
Rack mountable version of the DA1855A-PR2 | DA1855A-RM
DA1855A with rackmount | Differential Probes | D320
WaveLink 3.5 GHz Differential probe module 5V | AP034
1 GHz Active Differential Probe | D310
WaveLink 3.5 GHz Differential probe module 2.5V | WL-Pbus
WaveLink ProBus probe body = 3.5 GHz | AP033
500 MHz Active Differential Probe | High Voltage Probes | PPE1.2KV
10:1/100:1 200/300 MHz 5M Ohm/50M Ohm | PPE2KV
100:1 400 MHz 50M Ohm High Voltage Probe | PPE4KV
100:1 400 MHz 50M Ohm High-Voltage Probe | PPE5KV
100:1 400 MHz 50M Ohm High-Voltage Probe | PPE6KV
1000:1 400 MHz 50M Ohm High-Voltage Probe | PPE20KV
1000:1 100 MHz 100M Ohm High-Voltage Probe | High Voltage Differential Probes | ADP300
High-Voltage Active Differential Probe | ADP305
High-Voltage Differential Probes From LeCroy | Probe Parts and Kits | D350ST
WaveLink 4 GHz, 5 V Differential with Small Tip Module | D320-PT
WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx20-PT Adjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). | D310-PT
WaveLink D310 3.5 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx10-PT Adjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). | D300A-AT
WaveLink 4 GHz Differential Probe with Adjustable Tip Module |
|
|
|
