WaveAce Oscilloscope

Série WaveAce

Un bon oscilloscope devrait simplifier votre façon de travailler et vous aider à trouver les problèmes rapidement. Le WaveAce™ combine une longue mémoire, un écran couleur, de nombreuses possibilités de mesures, un déclenchement avancé et une excellente connectivité pour faciliter et diminuer le temps de débogage. Avec des bandes passantes de 60 MHz à 300 MHz, un échantillonnage jusqu’à 2 GEch/s et une mémoire jusqu’à 18 kpts, le WaveAce offre plus que ce qu’on peut attendre d’un oscilloscope aussi abordable.

- Bande passante de 60 MHz, 100 MHz, 200 MHz et 300 MHz

- Longue mémoire – 4 kpts et 18 kpts

- 32 mesures automatiques

- Ecran couleur de 5,7"

- Connexions USB host et device pour imprimantes, mémoires USB et contrôle PC



Longue acquisition et Zoom
Les oscilloscopes portables souffrent souvent d’un temps de capture trop court à cause d’une taille mémoire insuffisante. Le WaveAce dispose de 4 kpts et 18 kpts suivant les modèles, ce qui est 4 à 6 fois plus que les principaux produits concurrents. Plus de mémoire permet d’avoir plus de détails à chaque déclenchement. Utilisez le zoom pour observer ces détails de plus près.
Filtrage numérique
Le filtrage numérique est disponible sur chacune des voies du WaveAce. Les filtrages passe-bas, passe-haut, passe-bande et réjection de bande, permettent d’isoler les fréquences que vous souhaitez voir.
Déclenchement
Un déclenchement sur front n’est parfois pas vraiment suffisant. Le WaveAce dispose en plus des déclenchements sur largeur d’impulsion, vidéo et durée de front de montée.
Mesures automatiques
Avec 32 mesures automatiques, le WaveAce vous simplifie la tâche. Visualisez jusqu’à 4 mesures sans empiéter sur l’affichage de la courbe, ou 32 mesures d’un seul coup dans un tableau. Une large gamme de paramètres de temps sont disponibles pour analyser les relations entre les signaux sur deux voies différentes.
Fonctions math
Le WaveAce dispose des fonctions suivantes: Addition, Soustraction, Multiplication, Division et FFT. La FFT Permet le choix entre 4 types de fenêtres et deux échelles verticales.
Connectivité
Le WaveAce dispose d’un port USB host en face avant pour la sauvegarde d’images, de courbes et de configurations sur une mémoire USB. Il y a aussi un port USB device à l’arrière de l’appareil pour connecter un PC ou une imprimante PictBridge. La communication avec un PC est simplifiée grâce au logiciel EasyScope qui permet le contrôle complet de l’oscilloscope par USB ou RS-232.
Test Bon/Mauvais
Grâce au test de masque Bon/Mauvais, le WaveAce identifie et localise rapidement les problèmes. Un historique des résultats peut être affiché à l’écran.
Enregistrement en mode séquence
Capturez et rejouez jusqu’à 2500 courbes pour isoler l’évènement qui est à la source du problème que vous recherchez.
Sauvegarde interne grande capacité
Sauvegarder et rappeler des courbes ou des configurations depuis la mémoire interne peut vous épargner beaucoup de temps lors des séances de débogage. Le WaveAce peut sauvegarder jusqu’à 20 courbes, 20 configurations et 2 courbes de références en mémoire interne.
Modes d’acquisition
Suivant l’application vous avez besoin de modes d’acquisition différents. Le WaveAce dispose des modes temps réel, temps équivalent, détection de pic et moyennage.
WaveAce 101
Vertical System
Rise time
   8.8 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 17 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 20 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±2 V: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   10 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  2 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   500 MS/s on 1 Ch
250 MS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 40 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 40 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 102
Vertical System
Rise time
   5.8 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 17 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 30 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±2 V: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  1 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   500 MS/s on 1 Ch
250 MS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 60 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 60 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 112
Vertical System
Rise time
   3.5 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 17 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 50 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±2 V: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   2.5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  0.5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   500 MS/s on 1 Ch
250 MS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 100 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 100 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 202
Vertical System
Rise time
   5.8 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 30 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  1 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 60 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 60 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 212
Vertical System
Rise time
   3.5 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 50 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   2.5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 100 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 100 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 222
Vertical System
Rise time
   1.8 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF, 50 Ω ± 2%
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation
   ≥ 100:1 at 100 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   2.5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 200 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 200 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 232
Vertical System
Rise time
   1.2 ns
Input Channels
   2
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF, 50 Ω ± 2%
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation
   ≥ 100:1 at 150 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   1 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .4 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 300 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 300 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (2) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  na
USB (Host)
   1
Serial Port
   1

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   154 mm x 305 mm x 133 mm
(6" x 12" x 5.25")
Weight
  2.3 kg (5 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 204
Vertical System
Rise time
   5.8 ns
Input Channels
   4
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 30 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  1 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 60 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 60 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (4) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  1
USB (Host)
   2
Serial Port
   na

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   152 mm x 336 mm x 118 mm
(5.9" x 13.2" x 4.65")
Weight
  3.0 kg (6.6 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 214
Vertical System
Rise time
   3.5 ns
Input Channels
   4
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   ± 400 Vpk
Channel-Channel Isolation
   ≥ 100:1 at 50 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   2.5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 100 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 100 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (4) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  1
USB (Host)
   2
Serial Port
   na

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   152 mm x 336 mm x 118 mm
(5.9" x 13.2" x 4.65")
Weight
  3.0 kg (6.6 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 224
Vertical System
Rise time
   1.8 ns
Input Channels
   4
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF, 50 Ω ± 2%
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation
   ≥ 100:1 at 100 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   2.5 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .5 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 200 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 200 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (4) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  1
USB (Host)
   2
Serial Port
   na

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   152 mm x 336 mm x 118 mm
(5.9" x 13.2" x 4.65")
Weight
  3.0 kg (6.6 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

WaveAce 234
Vertical System
Rise time
   1.2 ns
Input Channels
   4
Bandwidth Limiters
   20 MHz
Input Impedance
   1 MΩ ± 2% || 13 pF ± 3 pF, 50 Ω ± 2%
Input Coupling
   AC, DC, GND
Maximum Input Voltage
   1 MΩ: ± 400 Vpk, 50 Ω: 5 VRMS
Channel-Channel Isolation
   ≥ 100:1 at 150 MHz
Vertical Resolution
   8 bits
Sensitivity
  2 mV/div - 5 V/div
DC Gain Accuracy
  ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range
   ±800 mV: 2mV/div - 100 mV/div
±40V: 102 mV/div - 5 V/div

Horizontal System
Time/Division Range
   1 ns/div - 50 s/div
Clock Accuracy
   100 ppm
Trigger and Interpolator Jitter
  .4 ns (pk-pk)

Acquisition System
Single-Shot Sample Rate/Ch
   2 GS/s on 1 Ch
1 GS/s on 2 Ch

Acquisition Processing
Averaging
   Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Enhanced Resolution (ERES)
  na
Interpolation
   Linear, Sin x/x

Triggering System
Modes
  Normal, Auto, Single, Stop
Sources
   Ch 1 - Ch 4, EXT, EXT/5, AC Line
Coupling Mode
   AC, DC, LF Rej, HF Rej,
Pre-trigger Delay
   memory/(2 * sample rate)
Post-trigger Delay
   260 Divisions
Hold-off by Time
   100 ns - 1.5 s
Internal Trigger Range
   ±6 divisions from center
External Trigger Sensitivity
   Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 300 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 300 MHz
External Trigger Input Range
   Ext: ±1.2 V, EXT/5: ±6 V

Trigger Types
Optional Advanced Triggers
   na

Probes
Probes
  Qty. (4) ÷10/1 Passive Probes
Scale Factors
   Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output
   1 kHz square wave, 3Vp-p (typical), output to probe hook

Interface
GPIB Port (optional)
  na
USB (Device)
   1
Ethernet Port
  1
USB (Host)
   2
Serial Port
   na

Power Requirements
Voltage
  100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption
   50 VA

Environmental and Safety
Temperature (Operating)
   10 °C to 40 °C
Temperature (Non-Operating)
   -20 °C to 60 °C
Humidity (Operating)
   85% RH, 40 °C
Humidity (Non-Operating)
   85% RH, 65 °C
Altitude (Operating)
   3000 m
Altitude (Non-Operating)
   15,266 m

Physical Dimensions
Dimensions (HWD)
   152 mm x 336 mm x 118 mm
(5.9" x 13.2" x 4.65")
Weight
  3.0 kg (6.6 lbs)

Warranty and Service
Warranty and Service
   3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.

Differential Probes
AP031700 V, 15 MHz High-Voltage Differential Probe (÷10, ÷100)
WA101-C55 Year Annual Traceable Calibration during Coverage period
WA101-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA101-W55 Year Warranty (including Standard warranty)
WA101-W88 Year Warranty (including Standard warranty)
WA102-C55 Year Annual Traceable Calibration during Coverage period
WA102-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA102-W88 Year Warranty (including Standard warranty)
WA112-C55 Year Annual Traceable Calibration during Coverage period
WA112-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA112-W88 Year Warranty (including Standard warranty)
WA202-C55 Year Annual Traceable Calibration during Coverage period
WA202-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA202-W88 Year Warranty (including Standard warranty)
WA204-C55 Year Annual Traceable Calibration during Coverage period
WA204-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA204-W55 Year Warranty (including Standard warranty)
WA204-W88 Year Warranty (including Standard warranty)
WA212-C55 Year Annual Traceable Calibration during Coverage period
WA212-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA212-W88 Year Warranty (including Standard warranty)
WA214-C55 Year Annual Traceable Calibration during Coverage period
WA214-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA214-W55 Year Warranty (including Standard warranty)
WA214-W88 Year Warranty (including Standard warranty)
WA222-C55 Year Annual Traceable Calibration during Coverage period
WA222-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA222-W88 Year Warranty (including Standard warranty)
WA224-C55 Year Annual Traceable Calibration during Coverage period
WA224-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA224-W55 Year Warranty (including Standard warranty)
WA224-W88 Year Warranty (including Standard warranty)
WA232-C55 Year Annual Traceable Calibration during Coverage period
WA232-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA232-W88 Year Warranty (including Standard warranty)
WA234-C55 Year Annual Traceable Calibration during Coverage period
WA234-T55 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period
WA234-W55 Year Warranty (including Standard warranty)
WA234-W88 Year Warranty (including Standard warranty)
High Voltage Probes
PPE1.2KV10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC
PPE20KV1000:1 100 MHz 100 MOhms High-Voltage Probe 20kV Max. Volt. DC + 40kVPeak AC
PPE2KV100:1 400 MHz 50 MOhms High-Voltage Probe
PPE4KV100:1 400 MHz 50 MOhms High-Voltage Probe
PPE5KV100:1 400 MHz 50 MOhms High-Voltage Probe
PPE6KV1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe
Product Resources
Downloads