SDA 7Zi-AシリーズSDA 7Zi-Aシリーズ、シリアル･データ･アナライザはWavePro 7Zi-Aシリーズ･オシロスコープをベースとしてシリアル･データ･インタフェースの解析用ツールSDA Ⅱを標準搭載した専用モデルです。 従来からのレクロイ独自の機能である、アイパターン、TIE、バスタブ･カーブ、ジッタヒストグラムの4解析結果同時表示と相まって、強力なシリアル・データ解析を実現します。また、オプションでイーサネット、USB、PCI Express Gen1、SerialATA、UWBとHDMIのコンプライアンス試験に対応しています。 - 帯域：2.5GHz、3.5GHz、4GHz、6GHz- 標準メモリ：32Mポイント@4ch／64Mポイント@2ch- 80ビット シリアル・パターン・トリガ（標準装備)- シリアルデータ解析機能SDA Ⅱ
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| モデル名 | 帯域 | サンプリング速度(4ch時/2ch時) | 標準メモリ(4ch時/2ch時) |
|---|---|---|---|
| SDA 725Zi-A | 2.5 GHz | 20/40 GS/s | 32/64 Mポイント |
| SDA 735Zi-A | 3.5 GHz | 20/40 GS/s | 32/64 Mポイント |
| SDA 740Zi-A | 4 GHz | 20/40 GS/s | 32/64 Mポイント |
| SDA 760Zi-A | 6 GHz | 20/40 GS/s | 32/64 Mポイント |
モデルごとスペック詳細（モデル名をクリックで詳細表示されます）
SDA 725Zi-A スペック
Vertical System |
|
| Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) | 2.5 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) | 500 MHz (typical) (≥5 mV/div) |
| Rise Time (10–90%) | 150 ps (typical, flatness mode) |
| Rise Time (20–80%) | 176 ps (typical, flatness mode) |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz, 1 GHz |
| Input Impedance | 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe |
| Input Coupling | ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω: ±5 Vrms 1 MΩ: 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation | DC to 2 GHz: 46 dB (>200:1 VSWR) 2 to 4 GHz: 34 dB (>50:1 VSWR) 4 to 6 GHz: 26 dB (>20:1 VSWR) (For any two ProLink input channels, same v/div settings, typical) |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±1.5% of full scale |
| Offset Range | 50 Ω (ProBus): ±750 mV @ 10–170 mV/div ±4 V @ 172 mV/div -1 V/div 1 MΩ: ±1V @ 2–128 mV/div ±10V @ 130mV-1.28V/div ±100V @ 1.3V-10V/div |
| Offset Accuracy | ±(1.5% of full scale + 1.0% of offset value + 1 mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div) |
| Clock Accuracy | < 1 ppm + (aging of 0.5ppm/yr from last calibration) |
| Time Interval Accuracy | < 0.06 / SR + (clock accuracy* Reading) (rms) |
| Jitter Noise Floor | 1.0 ps (TIE, typical) |
| Trigger and Interpolator Jitter | 2 psrms (typical) <0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10 MHz; 50 Ω impedance, applied at the rear input |
| External Timebase Reference (Output) | 10 MHz; 50 Ω impedance, output at the rear |
| External Clock | 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 40 GS/s on 2 Ch 20 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 µs |
| Memory Options (4 Ch / 2 Ch / 1Ch) | M-64 Option: 64M / 128M / 128M (15,000) L-128 Option: 128M / 256M / 256M (15,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 32 M / 64M / 64M (5000) |
Acquisition Processing |
|
| Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation | Linear or Sin x/x |
Triggering System |
|
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger) |
| Coupling Mode | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay | 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time | From 2 ns up to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range | ±4.1 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs | 2 div @ < 2.5 GHz 1.5 div @ < 1.25 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge Trigger) | 2 div @ < 1 GHz 1.5 div @ < 500 MHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling) |
| External Trigger Input Range | Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger | 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 300 ps) |
Basic Triggers |
|
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8 |
SMART Triggers |
|
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. |
| Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
SMART Triggers with Exclusion Technology |
|
| Glitch | Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Width (Signal or Pattern) | Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Interval (Signal or Pattern) | Triggers on intervals selectable between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Cascade (Sequence) Triggering |
|
| Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event |
| Types | A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog). |
| Holdoff | Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events |
| Reset | Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events |
High Speed Serial Protocol Triggering |
|
| Data Rates | 100 Mb/s - 1.25 Gb/s |
| Pattern Length | 80 bits, NRZ or 8b10b |
| Clock and Data Outputs | 400mVp-p (typical) AC coupled |
| Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density |
| Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) |
Color Waveform Display |
|
| Type | Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen |
| Resolution | WXGA; 1280 x 768 pixels. |
| Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y |
| Waveform Representation | Sample dots joined, or sample dots only |
Processor/CPU |
|
| Type | Intel® CoreTM 2 Quad, 3 GHz (or better) |
| Processor Memory | 8 GB standard |
| Operating System | Microsoft Windows® Vista Business Edition (64-bit) with SP1 |
| Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
Setup Storage |
|
| Front Panel and Instrument Status | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. |
Interface |
|
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| Network Communication Standard | VXI-11 or VICP, LXI Class C (v 1.2) Compliant |
| GPIB Port (optional) | Supports IEEE – 488.2 |
| LSIB Port (optional) | Supports PCIe Gen1 x4 protocol with LeCroy supplied API |
| Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) |
| USB Ports | minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices |
| External Monitor Port | 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other |
| Peripheral Bus | LeCroy LBUS standard |
Auxiliary Output |
|
| Connector Type | BNC, located on front |
| Signal Types | Select from calibrator, control signals or Off |
| Output Signal | 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
| Control Signals | Trigger enabled, trigger out, pass/fail status, off |
Power Requirements |
|
| Voltage | 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
| Max. Power Consumption | 850 W/850 VA |
Environmental and Safety |
|
| Temperature (Operating) | +5 °C to +40 °C including CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) | –20 °C to +60 °C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | Up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) | 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Random Vibration (Non-Operating) | 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
Physical Dimensions |
|
| Dimensions (HWD) | 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm) |
| Weight | 40.5 lbs. (18.5 kg) |
| Shipping Weight | 58.5 lbs. (26.5 kg) |
Certifications |
|
| Certifications | CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04 |
Warranty and Service |
|
| Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
SDA 735Zi-A スペック
Vertical System |
|
| Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) | 3.5 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) | 500 MHz (typical) (≥5 mV/div) |
| Rise Time (10–90%) | 120ps (typical, flatness mode) |
| Rise Time (20–80%) | 113 ps (typical, flatness mode) |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz, 1 GHz, 3 GHz |
| Input Impedance | 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe |
| Input Coupling | ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω: ±5 Vrms 1 MΩ: 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation | DC to 2 GHz: 46 dB (>200:1 VSWR) 2 to 4 GHz: 34 dB (>50:1 VSWR) 4 to 6 GHz: 26 dB (>20:1 VSWR) (For any two ProLink input channels, same v/div settings, typical) |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±1.5% of full scale |
| Offset Range | 50 Ω (ProBus): ±750 mV @ 10–170 mV/div ±4 V @ 172 mV/div -1 V/div 1 MΩ: ±1V @ 2–128 mV/div ±10V @ 130mV-1.28V/div ±100V @ 1.3V-10V/div |
| Offset Accuracy | ±(1.5% of full scale + 1.0% of offset value + 1 mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div) |
| Clock Accuracy | < 1 ppm + (aging of 0.5ppm/yr from last calibration) |
| Time Interval Accuracy | < 0.06 / SR + (clock accuracy* Reading) (rms) |
| Jitter Noise Floor | 800 fs (TIE, typical) |
| Trigger and Interpolator Jitter | 2 psrms (typical) <0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10 MHz; 50 Ω impedance, applied at the rear input |
| External Timebase Reference (Output) | 10 MHz; 50 Ω impedance, output at the rear |
| External Clock | 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 40 GS/s on 2 Ch 20 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 µs |
| Memory Options (4 Ch / 2 Ch / 1Ch) | M-64 Option: 64M / 128M / 128M (15,000) L-128 Option: 128M / 256M / 256M (15,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 32M / 64M / 64M (5000) |
Acquisition Processing |
|
| Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation | Linear or Sin x/x |
Triggering System |
|
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger) |
| Coupling Mode | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay | 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time | From 2 ns up to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range | ±4.1 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs | 2 div @ < 3.5 GHz 1.5 div @ < 1.75 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge Trigger) | 2 div @ < 1 GHz 1.5 div @ < 500 MHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling) |
| External Trigger Input Range | Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger | 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 250 ps) |
Basic Triggers |
|
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8 |
SMART Triggers |
|
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. |
| Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
SMART Triggers with Exclusion Technology |
|
| Glitch | Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Width (Signal or Pattern) | Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Interval (Signal or Pattern) | Triggers on intervals selectable between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Cascade (Sequence) Triggering |
|
| Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event |
| Types | A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog). |
| Holdoff | Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events |
| Reset | Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events |
High Speed Serial Protocol Triggering |
|
| Data Rates | 100 Mb/s - 1.25 Gb/s |
| Pattern Length | 80 bits, NRZ or 8b10b |
| Clock and Data Outputs | 400mVp-p (typical) AC coupled |
| Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density |
| Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) |
Color Waveform Display |
|
| Type | Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen |
| Resolution | WXGA; 1280 x 768 pixels. |
| Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y |
| Waveform Representation | Sample dots joined, or sample dots only |
Processor/CPU |
|
| Type | Intel® CoreTM 2 Quad, 3 GHz (or better) |
| Processor Memory | 8 GB standard |
| Operating System | Microsoft Windows® Vista Business Edition (64-bit) with SP1 |
| Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
Setup Storage |
|
| Front Panel and Instrument Status | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. |
Interface |
|
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| Network Communication Standard | VXI-11 or VICP, LXI Class C (v 1.2) Compliant |
| GPIB Port (optional) | Supports IEEE – 488.2 |
| LSIB Port (optional) | Supports PCIe Gen1 x4 protocol with LeCroy supplied API |
| Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) |
| USB Ports | minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices |
| External Monitor Port | 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other |
| Peripheral Bus | LeCroy LBUS standard |
Auxiliary Output |
|
| Connector Type | BNC, located on front |
| Signal Types | Select from calibrator, control signals or Off |
| Output Signal | 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
| Control Signals | Trigger enabled, trigger out, pass/fail status, off |
Power Requirements |
|
| Voltage | 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
| Max. Power Consumption | 850 W/850 VA |
Environmental and Safety |
|
| Temperature (Operating) | +5 °C to +40 °C including CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) | –20 °C to +60 °C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | Up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) | 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Random Vibration (Non-Operating) | 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
Physical Dimensions |
|
| Dimensions (HWD) | 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm) |
| Weight | 40.5 lbs. (18.5 kg) |
| Shipping Weight | 58.5 lbs. (26.5 kg) |
Certifications |
|
| Certifications | CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04 |
Warranty and Service |
|
| Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
SDA 740Zi-A スペック
Vertical System |
|
| Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB) | 4 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) | 3.5 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) | 500 MHz (typical) (≥5 mV/div) |
| Rise Time (10–90%) | 105 ps (typical, flatness mode) |
| Rise Time (20–80%) | 90ps (typical, flatness mode) |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz, 1 GHz, 3 GHz |
| Input Impedance | 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe |
| Input Coupling | ProLink Inputs - 50 Ω: DC, GND ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω (ProBus): ±5 Vrms 50 Ω (ProLink): ±4 Vpeak 1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation | DC to 2 GHz: 46 dB (>200:1 VSWR) 2 to 4 GHz: 34 dB (>50:1 VSWR) 4 to 6 GHz: 26 dB (>20:1 VSWR) (For any two ProLink input channels, same v/div settings, typical) |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±1.5% of full scale |
| Offset Range | 50 Ω (ProBus): ±750 mV @ 10–170 mV/div ±4 V @ 172 mV/div -1 V/div 1 MΩ: ±1V @ 2–128 mV/div ±10V @ 130mV-1.28V/div ±100V @ 1.3V-10V/div |
| Offset Accuracy | ±(1.5% of full scale + 1.0% of offset value + 1 mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div) |
| Clock Accuracy | < 1 ppm + (aging of 0.5ppm/yr from last calibration) |
| Time Interval Accuracy | < 0.06 / SR + (clock accuracy* Reading) (rms) |
| Jitter Noise Floor | 750 fs (TIE, typical) |
| Trigger and Interpolator Jitter | 1 psrms (typical) <0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10 MHz; 50 Ω impedance, applied at the rear input |
| External Timebase Reference (Output) | 10 MHz; 50 Ω impedance, output at the rear |
| External Clock | 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 40 GS/s on 2 Ch 20 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 µs |
| Memory Options (4 Ch / 2 Ch / 1Ch) | M-64 Option: 64M / 128M / 128M (15,000) L-128 Option: 128M / 256M / 256M (15,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 32M / 64M / 64M (5000) |
Acquisition Processing |
|
| Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation | Linear or Sin x/x |
Triggering System |
|
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger) |
| Coupling Mode | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay | 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time | From 2 ns up to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range | ±4.1 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs | 2 div @ < 3.5 GHz 1.5 div @ < 1.75 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs | 2 div @ < 4 GHz 1.5 div @ < 2 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge Trigger) | 2 div @ < 1 GHz 1.5 div @ < 500 MHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling) |
| External Trigger Input Range | Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger | 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps) |
Basic Triggers |
|
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8 |
SMART Triggers |
|
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. |
| Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
SMART Triggers with Exclusion Technology |
|
| Glitch | Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Width (Signal or Pattern) | Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Interval (Signal or Pattern) | Triggers on intervals selectable between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Cascade (Sequence) Triggering |
|
| Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event |
| Types | A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog). |
| Holdoff | Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events |
| Reset | Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events |
High Speed Serial Protocol Triggering |
|
| Data Rates | 100 Mb/s - 2.7, 3.0, 3.125 Gb/s |
| Pattern Length | 80 bits, NRZ or 8b10b |
| Clock and Data Outputs | 400mVp-p (typical) AC coupled |
| Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density |
| Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) |
Color Waveform Display |
|
| Type | Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen |
| Resolution | WXGA; 1280 x 768 pixels. |
| Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y |
| Waveform Representation | Sample dots joined, or sample dots only |
Processor/CPU |
|
| Type | Intel® CoreTM 2 Quad, 3 GHz (or better) |
| Processor Memory | 8 GB standard |
| Operating System | Microsoft Windows® Vista Business Edition (64-bit) with SP1 |
| Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
Setup Storage |
|
| Front Panel and Instrument Status | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. |
Interface |
|
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| Network Communication Standard | VXI-11 or VICP, LXI Class C (v 1.2) Compliant |
| GPIB Port (optional) | Supports IEEE – 488.2 |
| LSIB Port (optional) | Supports PCIe Gen1 x4 protocol with LeCroy supplied API |
| Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) |
| USB Ports | minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices |
| External Monitor Port | 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other |
| Peripheral Bus | LeCroy LBUS standard |
Auxiliary Output |
|
| Connector Type | BNC, located on front |
| Signal Types | Select from calibrator, control signals or Off |
| Output Signal | 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
| Control Signals | Trigger enabled, trigger out, pass/fail status, off |
Power Requirements |
|
| Voltage | 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
| Max. Power Consumption | 850 W/850 VA |
Environmental and Safety |
|
| Temperature (Operating) | +5 °C to +40 °C including CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) | –20 °C to +60 °C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | Up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) | 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Random Vibration (Non-Operating) | 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
Physical Dimensions |
|
| Dimensions (HWD) | 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm) |
| Weight | 40.5 lbs. (18.5 kg) |
| Shipping Weight | 58.5 lbs. (26.5 kg) |
Certifications |
|
| Certifications | CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04 |
Warranty and Service |
|
| Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
SDA 760Zi-A スペック
Vertical System |
|
| Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB) | 6 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB) | 3.5 GHz (≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB) | 500 MHz (typical) (≥5 mV/div) |
| Rise Time (10–90%) | 70 ps (typical, flatness mode) |
| Rise Time (20–80%) | 79 ps (typical, flatness mode) |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz, 1 GHz, 3 GHz, 4 GHz |
| Input Impedance | 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe |
| Input Coupling | ProLink Inputs - 50 Ω: DC, GND ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage | 50 Ω (ProBus): ±5 Vrms 50 Ω (ProLink): ±4 Vpeak 1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation | DC to 2 GHz: 46 dB (>200:1 VSWR) 2 to 4 GHz: 34 dB (>50:1 VSWR) 4 to 6 GHz: 26 dB (>20:1 VSWR) (For any two ProLink input channels, same v/div settings, typical) |
| Vertical Resolution | 8 bits; up to 11 bits with enhanced resolution (ERES) |
| Sensitivity | 50 Ω: 2 mV–1 V/div, fully variable (2-9.99 mV/div via zoom); 1 MΩ: 1 mV–10 V/div, fully variable |
| DC Gain Accuracy | ±1.5% of full scale |
| Offset Range | 50 Ω (ProBus): ±750 mV @ 10–170 mV/div ±4 V @ 172 mV/div -1 V/div 1 MΩ: ±1V @ 2–128 mV/div ±10V @ 130mV-1.28V/div ±100V @ 1.3V-10V/div |
| Offset Accuracy | ±(1.5% of full scale + 1.0% of offset value + 1 mV) |
Horizontal System |
|
| Timebases | Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input |
| Time/Division Range | 20 ps/div–1000 s/div (RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1000 s/div) |
| Clock Accuracy | < 1 ppm + (aging of 0.5ppm/yr from last calibration) |
| Time Interval Accuracy | < 0.06 / SR + (clock accuracy* Reading) (rms) |
| Jitter Noise Floor | 560 fs (TIE, typical) |
| Trigger and Interpolator Jitter | 1 psrms (typical) <0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range | ±9 x time/div. setting, 100 ms max., each channel |
| External Timebase Reference (Input) | 10 MHz; 50 Ω impedance, applied at the rear input |
| External Timebase Reference (Output) | 10 MHz; 50 Ω impedance, output at the rear |
| External Clock | 30 MHz–2 GHz, 50 Ω impedance, applied at the auxiliary input |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 40 GS/s on 2 Ch 20 GS/s on 4 Ch |
| Random Interleaved Sampling (RIS) | 200 GS/s for repetitive signals (20 ps/div to 10 ns/div) |
| Maximum Trigger Rate | 1,000,000 waveforms/second (in Sequence Mode, up to 4 channels) |
| Intersegment Time | 1 µs |
| Memory Options (4 Ch / 2 Ch / 1Ch) | M-64 Option: 64M / 128M / 128M (15,000) L-128 Option: 128M / 256M / 256M (15,000) |
| Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments) | 32M / 64M / 64M (5000) |
Acquisition Processing |
|
| Averaging | Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) | From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) | Envelope, floor, or roof for up to 1 million sweeps |
| Interpolation | Linear or Sin x/x |
Triggering System |
|
| Modes | Normal, Auto, Single, and Stop |
| Sources | Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger) |
| Coupling Mode | DC, AC, HFRej, LFRej |
| Pre-trigger Delay | 0–100% of memory size (adjustable in 1% increments of 100 ns) |
| Post-trigger Delay | 0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode |
| Hold-off by Time | From 2 ns up to 20 s or from 1 to 99,999,999 events |
| Internal Trigger Range | ±4.1 div from center |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs | 2 div @ < 3.5 GHz 1.5 div @ < 1.75 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs | 2 div @ < 6 GHz 1.5 div @ < 3 GHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge Trigger) | 2 div @ < 1 GHz 1.5 div @ < 500 MHz 1.0 div @ < 200 MHz (for DC, AC, LFRej coupling) |
| External Trigger Input Range | Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger | 2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps) |
Basic Triggers |
|
| Edge | Triggers when signal meets slope (positive, negative, or either) and level condition. |
| TV-Composite Video | Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8 |
SMART Triggers |
|
| State or Edge Qualified | Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events. |
| Qualified First | In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events. |
| Dropout | Triggers if signal drops out for longer than selected time between 1 ns and 20 s. |
| Pattern | Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern. |
SMART Triggers with Exclusion Technology |
|
| Glitch | Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Width (Signal or Pattern) | Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults. |
| Interval (Signal or Pattern) | Triggers on intervals selectable between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) | Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt | Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns. |
| Slew Rate | Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering | Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met |
Cascade (Sequence) Triggering |
|
| Capability | Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event |
| Types | A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog). |
| Holdoff | Holdoff between A and B, B and C, C or D, or any is selectable by time or number of events |
| Reset | Reset between A and B, B and C, C and D, or any combination is selectable in time or number of events |
High Speed Serial Protocol Triggering |
|
| Data Rates | 100 Mb/s - 2.7, 3.0, 3.125 Gb/s |
| Pattern Length | 80 bits, NRZ or 8b10b |
| Clock and Data Outputs | 400mVp-p (typical) AC coupled |
| Clock Recovery Jitter | 1 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density |
| Hardware Clock Recovery Loop BW | PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical) |
Color Waveform Display |
|
| Type | Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen |
| Resolution | WXGA; 1280 x 768 pixels. |
| Number of traces | Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles | Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y |
| Waveform Representation | Sample dots joined, or sample dots only |
Processor/CPU |
|
| Type | Intel® CoreTM 2 Quad, 3 GHz (or better) |
| Processor Memory | 8 GB standard |
| Operating System | Microsoft Windows® Vista Business Edition (64-bit) with SP1 |
| Real Time Clock | Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks. |
Setup Storage |
|
| Front Panel and Instrument Status | Store to the internal hard drive, over the network, or to a USB-connected peripheral device. |
Interface |
|
| Remote Control | Via Windows Automation, or via LeCroy Remote Command Set |
| Network Communication Standard | VXI-11 or VICP, LXI Class C (v 1.2) Compliant |
| GPIB Port (optional) | Supports IEEE – 488.2 |
| LSIB Port (optional) | Supports PCIe Gen1 x4 protocol with LeCroy supplied API |
| Ethernet Port | Supports 10/100/1000BaseT Ethernet interface (RJ45 port) |
| USB Ports | minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices |
| External Monitor Port | 15 pin D-Type WXGA compatible to support customer-supplied external monitor. DVI and power connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other |
| Peripheral Bus | LeCroy LBUS standard |
Auxiliary Output |
|
| Connector Type | BNC, located on front |
| Signal Types | Select from calibrator, control signals or Off |
| Output Signal | 500 Hz–5 MHz square wave or DC level; 2.5mV to 500 mV into 50 Ω (5 mV–1 V into 1 MΩ) |
| Control Signals | Trigger enabled, trigger out, pass/fail status, off |
Power Requirements |
|
| Voltage | 100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection; |
| Max. Power Consumption | 850 W/850 VA |
Environmental and Safety |
|
| Temperature (Operating) | +5 °C to +40 °C including CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) | –20 °C to +60 °C |
| Humidity (Operating) | 5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) | 5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) | Up to 10,000 ft. (3048 m) at or below +25 °C |
| Altitude (Non-Operating) | Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) | 0.5 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Random Vibration (Non-Operating) | 2.0 grms 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total |
| Functional Shock | 20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total |
Physical Dimensions |
|
| Dimensions (HWD) | 14"H x 18.4"W x 11.4"D (355 x 467 x 289 mm) |
| Weight | 40.5 lbs. (18.5 kg) |
| Shipping Weight | 58.5 lbs. (26.5 kg) |
Certifications |
|
| Certifications | CE Compliant, UL and cUL listed; conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04 |
Warranty and Service |
|
| Warranty and Service | 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services. |
上位モデル| 上位モデル | |
|---|---|
 |
|
| モデル名 | SDA 8Zi |
| 帯域 | 4～45GHz |
| サンプリング速度 | 40～120GS/s |
| 標準メモリ | 32～64Mポイント/ch |
|
詳細 |
Sampling Rate Options |
|
WPZi-1.5GHz-4X20GS 20 GS/s (40 GS/s Interleaved) Sampling Rate Option for 1.5 GHz WavePro Zi |
High Speed Output Accessories |
|
LSIB-1 High speed PCIe Gen1 x4 digitizer output for LeCroy oscilloscope. Half-height card with custom connector |
|
LSIB-HOSTBOARD PCI Express x4 Host Interface Board for desktop PC |
|
LSIB-HOSTCARD PCI Express x1 Express Card Host Interface for laptop Express Card slot |
|
LSIB-CABLE-3M PCI Express x 4 3-meter cable with x4 cable connectors included |
|
LSIB-CABLE-7M PCI Express x 4 7-meter cable with x4 cable connectors include |
Serial Data Analysis |
|
WPZi-CBL-DE-EMBED Remove cable effects from your measurements |
|
WPZi-SDAII SDA II Serial Data Analysis Option |
|
WPZi-EYEDRII Eye Doctor II Advanced Signal Integrity Tools for WavePro 7 Zi Oscilloscopes, SDA 7 Zi Serial Data Analyzers, and DDA 7 Zi Disk Drive Analyzers |
Serial Data Compliance |
|
QPHY-MIPI-DPHY QualiPHY Enabled MIPI D-PHY Software Option |
|
QPHY-DDR2 QualiPHY DDR2 Compliance Software Option |
|
QPHY-DDR3 QualiPHY Enabled DDR3 Software Option |
|
QPHY-ENET QualiPHY Ethernet Application Software |
|
QPHY-HDMI QualiPHY Enabled HDMI Software Option (TF-HDMI-3.3V-QUADPAK required;WavePro 760Zi requires SDA II option) |
|
QPHY-LPDDR2 QualiPHY LPDDR2 Compliance SW |
|
QPHY-PCIe QualiPHY Enabled PCIe Software Option (for Gen1 and Gen2 testing) |
|
QPHY-SATA-TSG-RSG QualiPHY Enabled SATA Software Option |
|
QPHY-USB USB Application Software Package |
|
QPHY-UWB WiMedia UWB Transmitter Measurement Software Option |
|
ENET-2ADA-BNCSMA 2 x BNC to SMA Adapter |
|
ENET-2CAB-SMA018 2 x 18 inch SMA to SMA Cable |
|
ENET-2CAB-SMA036 2 x 36 inch SMA to SMA Cable |
|
WPZi-SDM Serial Data Mask Software Package for WavePro Zi Series |
Computer Upgrade |
|
WPZi-2-UPG-8GBRAM Upgrade from 2 GB to 8 GB CPU RAM |
|
WPZi-4-UPG-8GBRAM Upgrade from 4 GB to 8 GB CPU RAM |
|
GPIB-2 GPIB Option for LeCroy oscilloscope. Half-height card with custom connector. |
|
WPZi-500GB-HD Upgrade from standard size hard drive to 500 GB hard drive |
|
WPZi-160GB-RHD-02 Additional 160 GB Hard Drive for WPZi. Includes Windows Vista OS, LeCroy oscilloscope software and critical scope operational file duplicates. |
|
WPZi-500GB-RHD-02 Additional 500 GB Hard Drive for WPZi. Includes Windows Vista OS, LeCroy oscilloscope software and critical scope operational file duplicates. |
Serial Trigger and Decode |
|
WPZi-SATAbus D SATA Decode annotation option for WavePro 7Zi Series Supports SATA Gen 1, 2, and 3 |
|
WPZi-1553 TD MIL-STD-1553 Trigger and decode option for WavePro Zi |
|
WPZi-8B10B D 8b10b Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-ARINC429bus DSymbolic ARINC 429 Bus Symbolic Decode option for WavePro Zi |
|
WPZi-AudioBus TD AudioBus Trigger and decode Option for WavePro 7Zi |
|
WPZi-AudioBus TDG AudioBus Trigger, decode, and Graph Option for WavePro 7Zi |
|
WPZi-CANbus TD CAN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-CANbus TDM CAN Bus Trigger, Decode, and Measure Option for WavePro Zi Series Oscilloscopes |
|
WPZi-DigRF3Gbus D DigRF 3G Bus Decode option for WavePro Zi |
|
WPZi-DPHYbus D D-PHY Bus Decode option for WavePro Zi |
|
WPZi-FlexrayBus TD FlexRay Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-FlexRayBus TDP FlexRay Bus Trigger, Decode, and Physical Layer Test Option for WavePro Zi Series Oscilloscopes |
|
WPZi-HSPT 50 Mb/s to 3.125 Gb/s High Speed Serial Trigger Option for 4-6 GHz Oscilloscopes & Disk Drive Analyzers |
|
WPZi-I2Cbus TD I2C Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-LINbus TD LIN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-MSPT 50 Mb/s to 1.25 Gb/s Medium Speed Serial Trigger Option for 2.5-3.5 GHz Oscilloscopes & Disk Drive Analyzers |
|
WPZi-PCIEbus D PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro 7 Zi Series Oscilloscopes and Analyzers |
|
WPZi-PROTObus MAG Serial Debug Toolkit - Measure Analyze Graph for WavePro Zi |
|
WPZi-ProtoSync Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro 7Zi/Zi-A |
|
WPZi-ProtoSync-BT Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro Zi/Zi-A |
|
WPZi-SPIbus TD SPI Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-UART-RS232bus TD UART and RS232 Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
|
WPZi-USB2bus D USB 2.0 Bus Decode option for WavePro Zi |
|
WPZi-USB3bus D USB 3.0 Decode option for WavePro Zi |
Jitter Analysis Software |
|
WPZi-JTA2 Jitter Timing and Analysis Software Package for WavePro Zi Series |
|
WPZi-JITKIT Clock, clock-data Jitter Analysis and views of time, statistical, spectral, and jitter overlay |
Synchronize Oscilloscope Options |
|
Zi-8CH-SYNCH HW Kit to allow combination of channels from two 8Zi oscilloscopes |
Miscellaneous |
|
KYBD-1 Keyboard |
|
WPZi-HARDCASE Hard carrying case for all WavePro Zi Series oscilloscopes |
|
WPZi-SOFTCASE Soft carrying case for all WavePro Zi Series oscilloscopes |
|
RACKMOUNT-1 Rack-mount accessory for converting a WavePro Zi series oscilloscope to an 8U rack-mounted package |
|
ZI-EXTDISP-15 Top-mounted, Fully Integrated 15.3" WXGA with Touch Screen Display, Including all Cabling and Software |
|
TTL-AUX-OUT Accessory for Zi oscilloscopes to enable TTL level output from the Aux Out connector |
|
Zi-FrontPanel Removable front panel for WavePro 7Zi and WaveMaster 8Zi Oscilloscopes |
|
Zi-FrontPanel-4Ch Removable front panel with 4 independent channel controls for WavePro 7Zi and WaveMaster 8Zi Oscilloscopes |
|
Rise-Time-Filter-100ps Low-Pass Rise Time Filter 100 ps |
|
Rise-Time-Filter-150ps Low-Pass Rise Time Filter 150 ps |
|
20dB-SMA-Attenuator 20 dB Attenuator |
Other Software Options |
|
WPZi-XDEV Developer's Tool Kit Option for WavePro Zi Series |
|
WPZi-SPECTRUM Spectrum Analyzer and Advanced FFT Option for WavePro Zi Series |
|
WPZi-EMC EMC Pulse Parameter Software Package for WavePro Zi Series |
|
WPZi-ET-PMT Electrical Telecom Pulse Mask Test Package for WavePro Zi Series |
Data Storage Software |
|
WPZi-AORM Advanced Optical Recording Measurement Package for WavePro Zi Series |
|
WPZi-DDM2 Disk Drive Measurements Software Package for WavePro Zi Series |
Power Analysis Software |
|
WPZi-PMA2 Power Measure Analysis Software Package |
Digital Filtering Software |
|
WPZi-DFP2 Digital Filter Software Package for WavePro Zi Series |
Mixed Signal Solutions |
|
MS-500 500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option |
|
MS-500-36 250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option |
|
MS-250 250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option |
Mixed Signal Accessories |
|
PK400-1 Large gripper probe set for 0.10'' (2.54 mm) pin pitch, includes 10 probes with color-coded leads |
|
PK400-2 Medium gripper probe set for 0.04'' (1.0 mm) pin pitch, includes 10 probes with color-coded leads |
|
PK400-3 Small gripper probe set for 0.008'' (0.2 mm) pin pitch, includes 10 probes with color-coded leads |
|
MSO-MICTOR Mictor Cable, D0-D35 |
|
MSO-3M 3M Interconnect Cable, D0-D17 or D18-D35 |
Serial Data Test Fixtures |
|
TF-DSQ Probe Deskew and Calibration Fixture |
|
TF-ENET-B 10/100/1000Base-T Compliance Test Fixture |
|
TF-ET Telecom Adaptor Kit 100Ω, 120Ω, 75Ω |
|
TF-HDMI-3.3V-QUADPAK HDMI Pull-Up Terminator Quad Pack – for Use with the Efficere ET-HDMI-TPS-S Test Fixture |
|
TF-SATA-C SATA Compliance Test Fixture (*WavePro 7 Zi and WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **20M memory required) |
|
TF-SATA-C-Kit SATA Compliance Test Kit (*WavePro 7 Zi and WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **20M memory required) |
|
TF-USB-B USB 2.0 Testing Compliance Test Fixture |
Current Probes |
|
CP030 30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse |
|
CP031 30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse |
|
AP015 30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse |
|
CP150 150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak Pulse |
|
CP500 500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak |
|
DCS015 Deskew Calibration Source for AP015 |
Differential Amplifiers |
|
DA1855A DA1855A, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters |
|
DXC100A DXC100A, Selectable ÷100 or ÷10 , Passive Differential Probe Pair for DA18xxA series |
|
DXC200 ÷1,50 MHz low capacitance Passive Differential Probe Pair for DA18xxA series |
|
DXC-5100 ÷100 2.5KV Passive High Voltage Probe Pair for DA18xxA series. Requires DA101 for full performance |
|
DA101 ÷10 1MOhm Passive Attenuator for DXC series probes |
|
DA1855A-PR2 2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters |
|
DA1855A-PR2-RM Rack mountable version of the DA1855A-PR2 |
|
DA1855A-RM DA1855A with rackmount |
Differential Probes |
|
WL-PLink WaveLink ProLink probe body >3.5 GHz |
|
WL-Pbus WaveLink ProBus probe body = 3.5 GHz |
|
D600A-AT WaveLink 7.5 GHz Differential Probe with Adjustable Tip Module |
|
D300A-AT WaveLink 4 GHz Differential Probe with Adjustable Tip Module |
|
D620 WaveLink 6 GHz Differential probe module 5V |
|
D610 WaveLink 6 GHz Differential probe module 2.5V |
|
D420 WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small tip Module |
|
D410 WaveLink D410 4 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small tip Module |
|
D320 WaveLink 3.5 GHz Differential probe module 5V |
|
D310 WaveLink 3.5 GHz Differential probe module 2.5V |
|
D620-PT WaveLink D620 6 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx20-PT Adjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
D610-PT WaveLink D610 6 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx10-PT Adjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
D500PT WaveLink 6 GHz Differential Positioner Mounted Tip Module |
|
D420-PT WaveLink D420 4 GHz/5Vp-p & +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx20-PT |
|
D410-PT WaveLink D410 4 GHz/2.5Vp-p & +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx10-PT |
|
D320-PT WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx20-PT Adjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
D310-PT WaveLink D310 3.5 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx10-PT Adjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
D600ST WaveLink 7 GHz Differential Probe with Small Tip Module (includes D6000ST-SI, D600ST-QC, D600ST-SP) |
|
D350ST WaveLink 4 GHz, 5 V Differential with Small Tip Module |
|
ZD1500 1.5 GHz, 1.0 pF Active Differential probe |
|
ZD1000 1 GHz, 1.0 pF Active Differential probe |
|
ZD500 500 MHz, 1.0 pF Active Differential probe |
|
Dx20-PT-KIT WaveLink Dx20-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
Dx10-PT-KIT WaveLink Dx10-PT Adjustable Positioner Tip Kit. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins(Qty. 4)/Sockets(Qty 2). |
|
AP034 1 GHz Active Differential Probe |
|
AP033 500 MHz Active Differential Probe |
High Voltage Probes |
|
PPE1.2KV 10:1/100:1 200/300 MHz 5M Ohm/50M Ohm |
|
PPE2KV 100:1 400 MHz 50M Ohm High Voltage Probe |
|
PPE4KV 100:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE5KV 100:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE6KV 1000:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE20KV 1000:1 100 MHz 100M Ohm High-Voltage Probe |
High Voltage Differential Probes |
|
AP031 15 MHz Differential Probe |
|
ADP300 High-Voltage Active Differential Probe |
|
ADP305 High-Voltage Differential Probes From LeCroy |
Optical Probes |
|
OE425 Short wavelength O/E Converter (500-870 nm) |
|
OE455 Long wavelength O/E Converter (950-1630 nm) |
|
OE525 Short wavelength O/E Converter (500-870 nm) |
|
OE555 Long wavelength O/E converter |
Probe Parts and Kits |
|
PACC-ZD001 Y Lead adapter, qty 1 |
|
PACC-ZD002 Solder in lead, qty 2 |
|
PACC-ZD003 Long spring ground, qty 2 |
|
PACC-ZD004 Tip Saver, qty 2 |
|
PACC-ZD005 Swivel tip adapter |
|
PACC-ZD006 Small IC adapter, qty 2 |
|
PACC-ZD007 Micro pogo pin tip, qty 6 |
|
LPA-SMA-KIT-A Kit of Pro-Link to SMA Adapter, new style |
|
LPA-SMA-A Pro-Link to SMA Adapter, new style |
|
Dxx0-Cable-HiTemp Replacement 30" matched cable set for use with HiTemp Solder tip leadset |
|
Dx20-SP Replacement Square Pin lead set for D320/D620 |
|
Dx20-SI Replacement Solder tip lead set for D320/D620 |
|
Dx20-SI-HiTEMP Replacement Solder tip leadset for use with D620/D320 and temperature extension cables |
|
Dx20-QC Replacement Quick Connect lead set for D320/D620 |
|
Dx20-PT Replacement Dx20-PT Tip with Qty. 4 Pogo Pin Tips and Qty. 2 Sockets |
|
Dx20-HiTEMP WaveLink Temperature extension cables for Dx20. Includes 1 set of matched 30" high temp cables, 1 solder tip leadset. |
|
Dx10-SP Replacement Square Pin lead set for D310/D610 |
|
Dx10-SI Replacement Solder tip lead set for D310/D610 |
|
Dx10-SI-HiTEMP Replacement Solder tip leadset for use with D610/D310 and temperature extension cables |
|
Dx10-QC Replacement Quick Connect lead set for D310/D610 |
|
Dx10-PT Replacement Dx10-PT Tip with Qty. 4 Pogo Pin Tips and Qty. 2 Sockets |
Transmission Line Probes |
|
PP066 7.5 GHz Low Capacitance ÷10/÷20 probe |
