| |
|
WaveMaster 8Ziシリーズ
最高の帯域幅/サンプリング速度を持つ信号捕捉システムと、卓越したパフォーマンスのX-Stream IIストリーミング･アーキテクチャの組み合わせにより、
超広帯域信号捕捉、10〜100倍の高速解析、瞬時の機器応答、20倍の高速外部データ転送など、すべての面で世界最速を実現します。
シリーズには、4〜30GHzのモデルがあり、帯域を柔軟にアップグレードできるので、新たな高速テクノロジーやシリアル・データ規格に必要に応じて、
簡単かつ低コストで対応することができます。
- 世界最広帯域30GHzを実現
- 世界最高サンプリング80GS/sを搭載
- 最高512Mポイントの大容量メモリ
- アップグレードに対応
 世界最速のリアルタイム・オシロスコープ
レクロイは帯域幅の障壁を取り払うために、独自設計のSiGe高速コンポーネントと
第5世代のDBI（Digital Bandwidth Interleave）テクノロジを組み合わせることで、前例のない
リアルタイム・オシロスコープ性能(30 GHz, 80 GS/s, 512 Mポイント/Ch)を実現しました。
最先端のオシロスコープ・プラットフォーム
X-Stream IIアーキテクチャでは、ロングメモリにおいて他の装置よりも10〜100倍の高速解析処理や真の512 Mポイントの解析メモリ、高速応答を実現します。また、オフラインによるデータ解析では、レクロイのLSIB（Serial Interface Bus）オプションを通じて最高325 MB/sのデータ転送速度が実現されます。15.3インチのWXGAタッチスクリーンでは、同等クラスの他のオシロスコープよりも50%大きい波形表示領域を利用することができます。すべてのモデルに50Ωと1MΩの入力が標準装備されており、紛失しやすい外部アダプタや高価な電源装置などがなくてもレクロイ製のすべてのプローブ(パッシブ・プローブを含む)がサポートされます。
 Eye
Doctor II 信号品質ツールによる高精度の測定
- テストフィクスチャとケーブル・デエンベディング機能
- エンファシス・エミュレーション
- シリアル・データ・チャンネルエミュレーション
- レシーバ・イコライゼーション
レクロイのEye Doctor II 信号品質ツールでは、フィクスチャ効果の減算、
およびエンファシス、シリアル・データ・チャンネル、レシーバ・イコライゼーション効果（DFE、FFE、CTLE）
のエミュレーションがサポートされますが、レコード長に関わりなく高速のオシロスコープ処理速度が維持されます。
そのため、シグナル･インテグリティ測定の精度が高まります。これにより、エンジニアはデザイン・マージンの確保や、
実際の回路性能の正確な把握が可能となるほか、高いフィールド信頼性と相互運用性を保証するためにエミュレーションを
必要とする新しい高速規格（PCIe Gen3 、USB3.0 、SAS/SATA 6GB/sなど）に対するコンプライアンステストを
実行できるようになります。
卓越したシリアル・データ解析
SDA IIシリアル・データ解析ソフトウェアは、シリアル・データのテストに必要な最高水準の信頼性を備えています。
SDA IIによるアイパターン解析ではアイパターン内のユニット･インターバル（UI）が100倍速で捕捉されるほか、
ビット・エラー・レート（IsoBER）解析やマスクエラーロケータなど、高度なアイパターン解析ツールを利用できます。
秀逸なジッタ分解機能や解析ツールを通じて、シリアル・データ・システム内のエラー動作を効率的に検出することもできます。
X-Stream IIストリーミング･アーキテクチャでは、あらゆる長さのレコードに対して10〜100倍速の高速解析処理を
サポートする優れたツールを利用できるため、より正確で詳細な解析結果が得られます。
第5世代のDBI（Digital Bandwidth Interleave）テクノロジ
インターリーブによってメモリとサンプリング速度を倍増することができるように、
帯域幅を倍増することが可能です。レクロイは高性能のマイクロ波/RF技術、
および高速プロセッサとデジタル信号処理（DSP）を使用することによって、
高速アナログ･デバイスを定格帯域範囲内で無理なく動作させながら、
4チャンネル時の2倍の帯域幅を2チャンネル時に実現します。
このインターリーブ方式では帯域幅をデバイスの定格帯域幅以上にブーストする方式に比べて、
優れた信号忠実度が得られます。
投資を無駄にしない仕組み
WaveMaster 8Ziプラットフォームは、帯域幅、
サンプリング速度、処理速度、応答性、ディスプレイのサイズ、
全般的機能のどの面から見ても卓抜しており、
今後数年間にわたり競合製品が現われる可能性は低いと言えます。
第2世代のテクノロジを利用しているエンジニアならば、
全てのモデルでアップグレード可能なWaveMaster 8Ziプラットフォームを採用すれば、
第3世代または第4世代のテクノロジの要求に対して、
将来数年間に渡って十分な対応ができます。
X-Stream II アーキテクチャ
高速処理のための最適化
X-Stream IIストリーミング･アーキテクチャでは、複数の100 Mポイント波形(またはそれ以上の波形)を
オシロスコープで処理するときでも、データに対する高い処理能力が保証されます。X-Stream IIでは
全ての計算を処理速度が速い高速CPUキャッシュ･メモリで実行できるように、波形データを可変長の波形セグメントに分割するので、
計算速度と効率性が向上しま  す。その結果、他のオシロスコープと比べて10〜100倍の処理速度が実現されます。
ロング･メモリのための最適化
X-Stream IIストリーミング･アーキテクチャでは、可変長の波形セグメントの長さをCPUキャッシュ・メモリに収まるサイズに常に制限できるため、
解析の種類に関わらず、実質的に解析メモリの長さに関する制限がありません。
従来のアーキテクチャによる他のオシロスコープではこのような特性がサポートされず、通常、
最適な条件下でも解析メモリの長さは捕捉メモリの長さの5〜20%に制限されます。
応答性のための最適化
WaveMaster 8Ziシリーズでは、バッファを動的に割り当てて利用可能なメモリを最大化することで、フロント・パネルの応答性を最大化しています。
組み込みの処理を中断すると、フロント・パネルのコントロールの変更が即座に反映されます。
その際、現在の内部処理が停止され、新しい波形が再配置またはズームされます（これらの表示や変更はすべて、
長い再計算なしで実行されます）。一方、波形のプレビューでは中間計算結果が表示されます。
プローブの制約からの解放
WaveMaster 8Ziシリーズの優れた点は、4〜30 GHz用のオシロスコープでは今までにない汎用的な機能を提供できることです。
WaveMaster 8Ziシリーズのすべてのオシロスコープでは、50Ω/1MΩの入力を装備しており、
高価な別売インピーダンス変換アダプタが必要ありません。これにより、追加のアダプタや外部電源を利用することなく、
レクロイ製の現行の全てのプローブを利用することができます。
完璧なシステム・デバッグ
高速シリアル信号のデバッグでは、複数の異なる信号間の関係を把握することが重要です。
WaveMaster 8Ziシリーズは、クラスで唯一汎用的なオシロスコープの機能（低速シリアル・トリガ&デコーダ、
MSO（ミックスド・シグナル・オシロスコープ）、ハイインピーダンス・プローブ）を標準でサポートしています。
これにより、高速シリアルデータの挙動とその問題点を、低速イベント（低速シリアル・バス、パラレル・データ・バス、
電源ノイズ等）との関係を容易に把握することができます。
豊富なトリガでより多くの問題をより効率的に検出
WaveMaster 8Ziシリーズでは、15GHzエッジトリガ、10種類のSMARTトリガ、カスケード・トリガを組み合わせて利用することにより、
様々な問題を迅速に検出し、原因を分析・究明することができます。
広範なシリアル・データ・オプション（I2C、SPI、UART、RS-232、CAN、LIN、FlexRay）を利用して、シリアル周辺バス･トラフィックに
関連するイベントを検出できます。ほとんどのシリアル･トリガには強力な条件付きDATAトリガが組み込まれているため、
シリアル･バス･トラフィックの特定範囲のDATA値が、どのように他の信号と相互作用するのかを詳しく分析できます。
TriggerScan
TriggerScanでは高速ハードウェア･トリガ機能と重ね書き表示機能を使用して、対象となる信号のみを捕捉するので、
他の手法よりも最高100倍も速く現象の把握ができます。従来の高速表示更新モードは遅い周波数の信号で発生する定期的な
イベントの検出に適していますが、TriggerScanは速い周波数の信号で発生する不定期なイベントの検出に適しています。
WaveScanの高度検索／解析機能でトリガで発見できない問題も検出可能
最適なトリガでも異常イベントのすべてを検出できないため、
より強力な異常イベントの検出機能が必要になる場合があります。
WaveScanTMには、単一の捕捉で異常イベントを検出する機能(捕捉と検索)と、
長時間にわたる数多くの捕捉で一定のイベントを検知する機能があります。
約20種類の検索モード（周波数、立ち上がり時間、ラント、デューティ･サイクルなど）を選択し、
検索条件を指定して検知を開始できます。WaveScanによって異常イベントが検出されると
、画面上にエラーがハイライト表示され、エラーの一覧が表示されます。
従来より25〜100倍速いデータ転送速度
オシロスコープのPCI Express® X4高速データ・バス
に直接接続できるレクロイLSIBオプションでは、最高
325 MB/sのデータ転送速度がサポートされています。
これに必要な作業は、オプションのLSIBカードをオシロ
スコープに取り付け、デスクトップ（ラップトップ）PC
用のホスト・ボード（カード）をリモート・コンピュー
タに取り付けるだけです。高速データ転送は、LSIBオプ
ションに付属のAPI（Application Programming
Interface）を通じて容易に実現されます。
特定の用途に向けた各種ソリューション
汎用的な波形解析ツー
ルのほかに、自動車、組
み込み機器設計、デジタ
ル回路設計、シリアル・
データ解析、コンプライア
ンス・テストなど、特定の
用途に特化した各種解析パ
ッケージを利用することが
できます。これらのパッケー
ジはレクロイ標準の測定/解
析機能を拡張するもので、ユ
ーザのニーズの変化に応じて
オシロスコープの使途を広げ
ることができます。
- デジタル・フィルタ・ソフトウェア・パッケージ
(WM8Zi-DFP2)
- スペクトル・アナライザ解析パッケージ
(WM8Zi-SPECTRUM)
- ミックスド・シグナル・オシロスコープ・オプション
- ジッタ・タイミング解析パッケージ(WM8Zi-JTA2)
- Eye Doctor II 信号品質ツール (WM8Zi-EYEDRII)
基本仕様
| モデル名 |
帯域 |
サンプリング速度
4ch時（2ch時） |
標準メモリ |
| WaveMaster 804Zi |
4GHz |
40GS/s （80GS/s*） |
10Mポイント |
| WaveMaster 806Zi |
6GHz |
40GS/s （80GS/s*） |
10Mポイント |
| WaveMaster 808Zi |
8GHz |
40GS/s （80GS/s*） |
10Mポイント |
| WaveMaster 813Zi |
13GHz |
40GS/s （80GS/s*） |
10Mポイント |
| WaveMaster 816Zi |
16GHz |
40GS/s （80GS/s*） |
10Mポイント |
| WaveMaster 820Zi |
20GHz |
40GS/s （80GS/s） |
10Mポイント |
| WaveMaster 825Zi |
25GHz |
40GS/s （80GS/s） |
10Mポイント |
| WaveMaster 830Zi |
30GHz |
40GS/s （80GS/s） |
10Mポイント |
* 4〜16GHzモデルは別途WM8Zi-2X80GSオプションが必要
モデルごとスペック詳細
WaveMaster 804 Zi
Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50 Ω
(-3 dB) |
4 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50 Ω
(-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ
(-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
95 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
71 ps
(flatness mode) |
| Input Channels |
4 (Any combination of ProLink and
ProBus inputs) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100
mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied
Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND ProBus
Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div
settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV–1 V/div, fully
variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10
V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of offset
value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
20 ps/div–128 s/div (Real-Time Mode: 20
ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100
ms/div up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from last
calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy* Reading)
(rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 600 fsrms (TIE,
typical)
For Acq. Length >10μs: 650 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at the
rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch using
optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20 ps/div
to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in Sequence
Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(5000) |
| S - Memory Option |
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| M - Memory Option |
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| L - Memory Option |
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in 1%
increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
2 div @ < 4 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate
(50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8),
Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing
(1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if a
defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode, triggers
repeatably on event B only if a defined pattern, state, or edge
(event A) is satisfied in the first segment of the acquisition.
Holdoff between sources is selectable by time or events. |
| Dropout |
Triggers if signal drops out for longer
than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR, NOR)
of 5 inputs (4 channels and external trigger input). Each source can
be high, low, or don’t care. The High and Low level can be selected
independently. Triggers at start or end of the pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or both
widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given state
(or transition edge) has occurred on another source. Delay between
sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between 1
ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that condition
is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or both
is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP), UART-RS232,
CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces (M1-M4)
store 16 bit/point full length waveforms. Waveforms can be stored to
any number of files limited only by the data storage media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100% adjustable
via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional
WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores each
trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision internal
clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive, over
a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional LeCroy
or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10
kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control signals
or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out, pass/fail
status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
975 W / 975 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including CD-RW/DVD-ROM
drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes in
each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes in
each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes, 18
shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x 390
mm) |
| Weight |
51.5 lbs. (23.4 kg) |
| Shipping Weight |
70.0 lbs. (31.8 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 806 Zi
Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50 Ω
(-3 dB) |
6 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50 Ω
(-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1 MΩ
(-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
63 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
47 ps
(flatness mode) |
| Input Channels |
4 (Any combination of ProLink and
ProBus inputs) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 4 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100
mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied
Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND ProBus
Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div
settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV–1 V/div, fully
variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10
V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of offset
value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
20 ps/div–128 s/div (Real-Time Mode: 20
ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100
ms/div up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from last
calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy* Reading)
(rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 450 fsrms (TIE,
typical)
For Acq. Length >10μs: 500 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at the
rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch using
optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20 ps/div
to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in Sequence
Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(5000) |
| S - Memory Option |
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| M - Memory Option |
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| L - Memory Option |
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s
on 2ch with twice the memory)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in 1%
increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
2 div @ < 6 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate
(50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8),
Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing
(1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if a
defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode, triggers
repeatably on event B only if a defined pattern, state, or edge
(event A) is satisfied in the first segment of the acquisition.
Holdoff between sources is selectable by time or events. |
| Dropout |
Triggers if signal drops out for longer
than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR, NOR)
of 5 inputs (4 channels and external trigger input). Each source can
be high, low, or don’t care. The High and Low level can be selected
independently. Triggers at start or end of the pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or both
widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given state
(or transition edge) has occurred on another source. Delay between
sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between 1
ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that condition
is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or both
is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP), UART-RS232,
CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces (M1-M4)
store 16 bit/point full length waveforms. Waveforms can be stored to
any number of files limited only by the data storage media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100% adjustable
via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional
WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores each
trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision internal
clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive, over
a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional LeCroy
or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10
kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control signals
or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out, pass/fail
status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
975 W / 975 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including CD-RW/DVD-ROM
drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes in
each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes in
each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes, 18
shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x 390
mm) |
| Weight |
51.5 lbs. (23.4 kg) |
| Shipping Weight |
70.0 lbs. (31.8 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 808 Zi
Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
8 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
49 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
37 ps
(flatness mode) |
| Input Channels |
4 (Any combination of ProLink and
ProBus inputs) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100
mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND ProBus
Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div
settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV–1 V/div, fully
variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2
mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
20 ps/div–128 s/div (Real-Time Mode:
20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode:
100 ms/div up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 400 fsrms
(TIE, typical)
For Acq. Length >10μs: 450 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch
using optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(5000) |
| S - Memory Option |
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| M - Memory Option |
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| L - Memory Option |
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
2 div @ < 8 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional
WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
975 W / 975 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
51.5 lbs. (23.4 kg) |
| Shipping Weight |
70.0 lbs. (31.8 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 813 Zi
Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
13 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
32.5 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
24.5 ps
(flatness mode) |
| Input Channels |
4 (Any combination of ProLink and
ProBus inputs) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz,
8 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100
mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND ProBus
Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div
settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV–1 V/div, fully
variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2
mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
20 ps/div–128 s/div (Real-Time Mode:
20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode:
100 ms/div up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 375 fsrms
(TIE, typical)
For Acq. Length >10μs: 425 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch
using optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(5000) |
| S - Memory Option |
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| M - Memory Option |
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| L - Memory Option |
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
3 div @ < 13 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional
WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
975 W / 975 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
51.5 lbs. (23.4 kg) |
| Shipping Weight |
70.0 lbs. (31.8 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 816 Zi
Vertical System
|
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
16 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
28.5 ps
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
21.5 ps
(flatness mode) |
| Input Channels |
4 (Any combination of ProLink and
ProBus inputs) |
| Bandwidth Limiters |
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz,
8 GHz, 13 GHz |
| Input Impedance |
ProLink Inputs: 50 Ω+/-2% for ≤100
mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
ProLink Inputs - 50 Ω: DC, GND ProBus
Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND |
| Maximum Input Voltage |
50 Ω (ProLink): ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div
settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (ProLink): 2 mV–1 V/div, fully
variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2
mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
20 ps/div–128 s/div (Real-Time Mode:
20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode:
100 ms/div up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 290 fsrms
(TIE, typical)
For Acq. Length >10μs: 340 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch
using optional WM8Zi-2X80GS External Interleaving Device) |
| Random Interleaved Sampling (RIS) |
200 GS/s for repetitive signals (20
ps/div to 10 ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(5000) |
| S - Memory Option |
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| M - Memory Option |
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| L - Memory Option |
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80
GS/s on 2ch with twice the memory)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s with optional
WM8Zi-2X80GS external interleaving device) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (4) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
975 W / 975 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
51.5 lbs. (23.4 kg) |
| Shipping Weight |
70.0 lbs. (31.8 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 820 Zi
Vertical System
|
| Analog (2.92 mm Input) Bandwidth @ 50
Ω (-3 dB) |
20 GHz |
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
16 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
20 ps (@ full BW)
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
15 ps
(flatness mode) |
| Input Channels |
4 (Any combination of 16 GHz ProLink
inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW) |
| Bandwidth Limiters |
For <20 GHz Mode: 20 MHz, 200 MHz, 1
GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: None |
| Input Impedance |
2.92mm Inputs: 50 Ω+/-2% for ≤79
mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100
mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
2.92 mm Inputs: 50 Ω: DC, GND ProLink
Inputs - 50 Ω: DC, GND ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω:
DC, GND |
| Maximum Input Voltage |
2.92 mm Inputs: ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different
v/div settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (2.92 mm): 10 mV–500 mV/div,
fully variable
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via
zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (2.92 mm):
(±500 mV @ 2–79 mV/div
(±4 V @ 80 mV/div -500 mV/div
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–128 mV/div
(±10V @ 130mV-1.28V/div (±100V @ 1.3V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
For ≥20 GHz Mode: Real-Time Mode, 20
ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div–128 s/div (Real-Time Mode: 20 ps/div -
64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div
up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 265 fsrms
(TIE, typical)
For Acq. Length >10μs: 300 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch when
operated in ≥20 GHz Mode) |
| Random Interleaved Sampling (RIS) |
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10
ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000) |
| S - Memory Option |
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| M - Memory Option |
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| L - Memory Option |
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) 2.92mm Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s when operated in ≥
20 GHz Mode) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (2) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
1025 W / 1025 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
58 lbs. (26.4 kg) |
| Shipping Weight |
76.0 lbs. (34.5 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 825 Zi
Vertical System
|
| Analog (2.92 mm Input) Bandwidth @ 50
Ω (-3 dB) |
25 GHz |
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
16 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
17.5 ps (@ full BW)
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
13 ps
(flatness mode) |
| Input Channels |
4 (Any combination of 16 GHz ProLink
inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW) |
| Bandwidth Limiters |
For <20 GHz Mode: 20 MHz, 200 MHz, 1
GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: 20 GHz |
| Input Impedance |
2.92mm Inputs: 50 Ω+/-2% for ≤79
mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100
mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
2.92 mm Inputs: 50 Ω: DC, GND ProLink
Inputs - 50 Ω: DC, GND ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω:
DC, GND |
| Maximum Input Voltage |
2.92 mm Inputs: ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different
v/div settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (2.92 mm): 10 mV–500 mV/div,
fully variable
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via
zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (2.92 mm):
(±500 mV @ 2–79 mV/div
(±4 V @ 80 mV/div -500 mV/div
50 Ω (ProLink):
(±500 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2–100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2–128 mV/div
(±10V @ 130mV-1.28V/div (±100V @ 1.3V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
For ≥20 GHz Mode: Real-Time Mode, 20
ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div–128 s/div (Real-Time Mode: 20 ps/div -
64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div
up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 235 fsrms
(TIE, typical)
For Acq. Length >10μs: 275 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch when
operated in ≥20 GHz Mode) |
| Random Interleaved Sampling (RIS) |
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10
ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000) |
| S - Memory Option |
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| M - Memory Option |
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| L - Memory Option |
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) 2.92mm Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s when operated in ≥
20 GHz Mode) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (2) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
1025 W / 1025 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
58 lbs. (26.4 kg) |
| Shipping Weight |
76.0 lbs. (34.5 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
WaveMaster 830 Zi
Vertical System
|
| Analog (2.92 mm Input) Bandwidth @ 50
Ω (-3 dB) |
30 GHz |
| Analog (ProLink Input) Bandwidth @ 50
Ω (-3 dB) |
16 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 50
Ω (-3 dB) |
3.5 GHz
(≥10 mV/div) |
| Analog (ProBus Input) Bandwidth @ 1
MΩ (-3 dB) |
500 MHz (typical, ≥2 mV/div) |
| Rise Time (typical, 10-90%, 50 Ω) |
15.5 ps (@ full BW)
(test limit, flatness mode) |
| Rise Time (typical, 20-80%, 50 Ω) |
11.5 ps
(flatness mode) |
| Input Channels |
4 (Any combination of 16 GHz ProLink
inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW) |
| Bandwidth Limiters |
For <20 GHz Mode: 20 MHz, 200 MHz, 1
GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: 20 GHz, 25 GHz |
| Input Impedance |
2.92mm Inputs: 50 Ω+/-2% for ≤79
mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100
mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with
supplied Probe |
| Input Coupling |
2.92 mm Inputs: 50 Ω: DC, GND ProLink
Inputs - 50 Ω: DC, GND ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω:
DC, GND |
| Maximum Input Voltage |
2.92 mm Inputs: ±2 Vmax@≤100mV/div,
5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC) |
| Channel-Channel Isolation |
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different
v/div settings, typical) |
| Vertical Resolution |
8 bits; up to 11 bits with enhanced
resolution (ERES) |
| Sensitivity |
50 Ω (2.92 mm): 10 mV–500 mV/div,
fully variable
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via
zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable |
| DC Gain Accuracy |
(±1.5% of full scale |
| Offset Range |
50 Ω (2.92 mm): (±500 mV @ 2–79
mV/div (±4 V @ 80 mV/div -500 mV/div 50 Ω (ProLink): (±500 mV @
2–100 mV/div (±4 V @ >100 mV/div -1 V/div 50 Ω (ProBus): (±750 mV
@ 2–100 mV/div (±4 V @ >100 mV/div -1 V/div 1 MΩ: (±1V @ 2–128
mV/div (±10V @ 130mV-1.28V/div (±100V @ 1.3V-10V/div |
| Offset Accuracy |
(±(1.5% of full scale + 1.5% of
offset value + 2 mV) |
| |
Horizontal System
|
| Timebases |
Internal timebase common to 4 input
channels; an external clock may be applied at the auxiliary input |
| Time/Division Range |
For ≥20 GHz Mode: Real-Time Mode, 20
ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div–128 s/div (Real-Time Mode: 20 ps/div -
64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div
up to 128 s/div), depending on memory length |
| Clock Accuracy |
< 1 ppm + (aging of 0.5ppm/yr from
last calibration) |
| Time Interval Accuracy |
< 0.06 / SR + (clock accuracy*
Reading) (rms) |
| Jitter Noise Floor |
For Acq. Length ≤10μs: 200 fsrms
(TIE, typical)
For Acq. Length >10μs: 240 fsrms (TIE, typical) |
| Trigger and Interpolator Jitter |
2 ps rms (typical)
<0.1 ps rms (typical, software assisted) |
| Channel-Channel Deskew Range |
(±9 x time/div. setting or 25 ns max.
(whichever is larger), each channel |
| External Timebase Reference (Input) |
10 MHz; 50 Ω impedance, applied at
the rear input |
| External Timebase Reference (Output) |
10 MHz; 50 Ω impedance, output at the
rear |
| External Sample Clock |
Not Available |
| |
Acquisition System
|
| Single-Shot Sample Rate/Ch |
40 GS/s on 4 Ch (80 GS/s on 2 Ch when
operated in ≥20 GHz Mode) |
| Random Interleaved Sampling (RIS) |
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10
ns/div) |
| Maximum Trigger Rate |
1,000,000 waveforms/second (in
Sequence Mode, up to 4 channels) |
| Intersegment Time |
1 μs |
| Standard Memory (4 Ch / 2 Ch) (Number
of Segments) |
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000) |
| S - Memory Option |
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| M - Memory Option |
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| L - Memory Option |
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| VL – Memory Option |
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000) |
| |
Acquisition Processing
|
| Averaging |
Summed averaging to 1 million sweeps;
continuous averaging to 1 million sweeps |
| Enhanced Resolution (ERES) |
From 8.5 to 11 bits vertical
resolution |
| Envelope (Extrema) |
Envelope, floor, or roof for up to 1
million sweeps |
| Interpolation |
Linear or Sin x/x |
| |
Triggering System
|
| Modes |
Normal, Auto, Single, and Stop |
| Sources |
Any input channel, Aux, Aux/10, Line,
or Fast Edge. Slope and level unique to each source (except line
trigger) |
| Coupling |
DC, AC, HFRej, LFRej |
| Pre-trigger Delay |
0–100% of memory size (adjustable in
1% increments of 100 ns) |
| Post-trigger Delay |
0–10,000 divisions in real time mode,
limited at slower time/div settings or in roll mode |
| Hold-off by Time or Events |
From 2 ns up to 20 s or from 1 to
99,999,999 events |
| Internal Trigger Range |
(±4.1 div from center |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) 2.92mm Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProBus Inputs |
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω ) |
| Trigger Sensitivity with Edge Trigger
(Ch 1–4) ProLink Inputs |
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω ) |
| External Trigger Sensitivity, (Edge
Trigger) |
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling) |
| External Trigger Input Range |
Aux (±0.4 V); Aux/10 (±4 V) |
| Max. Trigger Frequency, SMART Trigger
|
2.0 GHz @ ≥ 10 mV/div (minimum
triggerable width 200 ps) |
| |
Basic Triggers
|
| Edge |
Triggers when signal meets slope
(positive, negative, or either) and level condition. |
| Window |
Triggers when signal exits a window
defined by adjustable thresholds |
| TV-Composite Video |
Triggers NTSC or PAL with selectable
line and field; HDTV (720p, 1080i, 1080p) with selectable frame
rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields
(1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz),
Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive
or Negative). |
| |
SMART Triggers
|
| State or Edge Qualified |
Triggers on any input source only if
a defined state or edge occurred on another input source. Holdoff
between sources is selectable by time or events. |
| Qualified First |
In Sequence acquisition mode,
triggers repeatably on event B only if a defined pattern, state,
or edge (event A) is satisfied in the first segment of the
acquisition. Holdoff between sources is selectable by time or
events. |
| Dropout |
Triggers if signal drops out for
longer than selected time between 1 ns and 20 s. |
| Pattern |
Logic combination (AND, NAND, OR,
NOR) of 5 inputs (4 channels and external trigger input). Each
source can be high, low, or don’t care. The High and Low level can
be selected independently. Triggers at start or end of the
pattern. |
| |
SMART Triggers with Exclusion Technology
|
| Glitch |
Triggers on positive or negative
glitches with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Width (Signal or Pattern) |
Triggers on positive, negative, or
both widths with widths selectable as low as 200ps to 20 s, or on
intermittent faults. |
| Interval (Signal or Pattern) |
Triggers on intervals selectable
between 1 ns and 20 s. |
| Timeout (State/Edge Qualified) |
Triggers on any source if a given
state (or transition edge) has occurred on another source. Delay
between sources is 1 ns to 20 s, or 1 to 99,999,999 events. |
| Runt |
Trigger on positive or negative runts
defined by two voltage limits and two time limits. Select between
1 ns and 20 ns. |
| Slew Rate |
Trigger on edge rates. Select limits
for dV, dt, and slope. Select edge limits between 1 ns and 20 ns. |
| Exclusion Triggering |
Trigger on intermittent faults by
specifying the expected behavior and triggering when that
condition is not met |
| |
Cascade (Sequence) Triggering
|
| Capability |
Arm on "A" event, then Trigger on "B"
event. Or Arm on "A" event, then Qualify on "B" event, and Trigger
on "C" event. Or Arm on “A” event, then Qualify on “B” then “C”
event, and Trigger on “D” event |
| Types |
A, B, C, or D event: Edge, Glitch,
Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern
(analog) |
| Holdoff |
Holdoff between A and B, B and C, or
both is selectable by time or number of events |
| Reset |
Reset between A and B, B and C, or
both is selectable in time or number of events |
| |
High Speed Serial Protocol Triggering
|
| Data Rates |
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s |
| Pattern Length |
80 bits, NRZ or 8b10b |
| Clock and Data Outputs |
400mVp-p (typical) AC coupled |
| Clock Recovery Jitter |
2 ps rms + 0.3% Unit Interval rms for
PRBS data patterns with 50% transition density (typical) |
| Hardware Clock Recovery Loop BW |
PLL Loop BW = Fbaud/5500, 100 Mb/s to
2.488 Gb/s (typical) |
| |
Low Speed Serial Protocol Triggering (Optional)
|
| Optionally available |
I2C, SPI (SPI, SSPI, SIOP),
UART-RS232, CAN, LIN, FlexRay |
| |
Color Waveform Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels. |
| Number of traces |
Display a maximum of 8 traces.
Simultaneously display channel, zoom, memory and math traces. |
| Grid Styles |
Auto, Single, Dual, Quad, Octal, X-Y,
Single+X-Y, Dual+X-Y |
| Waveform Representation |
Sample dots joined, or sample dots
only |
| |
Internal Waveform Memory
|
| Internal Waveform Memory |
4 active waveform memory traces
(M1-M4) store 16 bit/point full length waveforms. Waveforms can be
stored to any number of files limited only by the data storage
media capacity. |
| |
LeCroy WaveStream™ Fast Viewing Mode
|
| Intensity |
256 Intensity Levels, 1–100%
adjustable via front panel control |
| Types |
Select analog or color-graded |
| Number of Channels |
up to 4 simultaneously |
| Max Sampling Rate |
40 GS/s (80 GS/s when operated in ≥
20 GHz Mode) |
| Persistence Aging |
Select from 500 ms to Infinity |
| Waveforms/second (continuous) |
up to 2500 Waveforms/second |
| Operation |
Front panel toggle between WaveStream
ON (Analog), ON (Color) and OFF |
| |
Automatic Setup
|
| Auto Setup |
Automatically sets timebase, trigger,
and sensitivity to display a wide range of repetitive signals |
| Find Vertical Scale |
Automatically sets the vertical
sensitivity and offset for the selected channel to display a
waveform with the maximum dynamic range |
| |
Probes
|
| Probes |
Qty. (2) ÷10 Passive Probes |
| Probing System |
Probus and ProLink. Automatically
detects and supports a variety of compatible probes |
| Scale Factors |
Automatically or manually selected
depending on probe used |
| Calibration Output |
1kHz square wave, 1Vp-p (typical),
output to probe hook |
| |
Integrated Second Display
|
| Type |
Color 15.3" flat panel TFT-Active
Matrix LCD with high resolution touch screen |
| Resolution |
WXGA; 1280 x 768 pixels |
| |
Analog Persistence Display
|
| Analog and Color-Graded Persistence |
Variable saturation levels; stores
each trace’s persistence data in memory |
| Trace Selection |
Activate persistence on all or any
combination of traces |
| Sweep Display Modes |
All accumulated, or all accumulated
with last trace highlighted |
| Persistence Types |
Select analog, color, or
three-dimensional |
| Persistence Aging |
Select from 500 ms to infinity |
| |
High Speed Digitizer Output (Option)
|
| Type |
LeCroy LSIB |
| Transfer Rate |
up to 325 MB/s (typical) |
| Output Protocol |
PCI Express, Gen 1 (4 lanes utilized
for data transfer) |
| Control Protocol |
TCP/IP |
| Command Set |
Via Windows Automation, or via LeCroy
Remote Command Set |
| |
Processor/CPU
|
| Type |
Intel® CoreTM 2 Quad, 2.5 GHz (or
better) |
| Processor Memory |
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory) |
| Operating System |
Microsoft Windows® Vista Business
Edition (64-bit) with SP1 |
| Real Time Clock |
Date and time displayed with waveform
in hardcopy files. SNTP support to synchronize to precision
internal clocks. |
| |
Zoom Expansion Traces
|
| Zoom Expansion Traces |
Display up to 4 Zoom and 8 Math/Zoom
traces |
| |
Setup Storage
|
| Front Panel and Instrument Status |
Store to the internal hard drive,
over a network, or to a USB-connected peripheral device. |
| |
Interface
|
| Remote Control |
Via Windows Automation, or via LeCroy
Remote Command Set |
| Network Communication Standard |
VXI-11 or VICP, LXI Class C (v1.2)
Compliant |
| GPIB Port (optional) |
Supports IEEE – 488.2 |
| LSIB Port (optional) |
Supports PCIe Gen1 x4 protocol with
LeCroy supplied API |
| Ethernet Port |
Supports 10/100/1000BaseT Ethernet
interface (RJ45 port) |
| USB Ports |
minimum 6 total (incl. 3 front panel)
USB 2.0 ports support Windows compatible devices |
| External Monitor Port |
15 pin D-Type WXGA compatible to
support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch
screen display accessory.
Includes support for extended desktop operation with optional
LeCroy or other second monitor. |
| Peripheral Bus |
LeCroy LBUS standard |
| |
Auxiliary Input
|
| Signal Types |
Select External Trigger or External
Clock Input on the front panel |
| Coupling |
50 Ω: DC; 1 MΩ: AC, DC, GND |
| Max. Input Voltage |
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC <
10 kHz + DC) |
| |
Auxiliary Output
|
| Connector Type |
BNC, located on front |
| Signal Types |
Select from calibrator, control
signals or Off |
| Calibrator Signal |
500 Hz–5 MHz square wave or DC level;
0.0 to 500 mV into 50 Ω (0–1 V into 1 MΩ) |
| Control Signals |
Trigger enabled, trigger out,
pass/fail status, off |
| |
General
|
| Auto Calibration |
Ensures specified DC and timing
accuracy is maintained for 1 year minimum. |
| |
Power Requirements
|
| Voltage |
100–240 VAC ±10% at 45-66 Hz; 100-120
VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection |
| Max. Power Consumption |
1025 W / 1025 VA |
| |
Environmental and Safety
|
| Temperature (Operating) |
+5 °C to +40 °C including
CD-RW/DVD-ROM drive |
| Temperature (Non-Operating) |
–20 °C to +60 °C |
| Humidity (Operating) |
5% to 80% relative humidity
(non-condensing) up to +31 °C. Upper limit derates to 50% relative
humidity (non-condensing) at +40 °C. |
| Humidity (Non-Operating) |
5% to 95% relative humidity
(non-condensing) as tested per MIL-PRF-28800F |
| Altitude (Operating) |
Up to 10,000 ft. (3048 m) at or below
+25 °C |
| Altitude (Non-Operating) |
Up to 40,000 ft. (12,192 m) |
| Random Vibration (Operating) |
0.5 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Random Vibration (Non-Operating) |
2.4 grms 5 Hz to 500 Hz, 15 minutes
in each of three orthogonal axes |
| Functional Shock |
20 g peak, half sine, 11 ms pulse, 3
shocks (positive and negative) in each of three orthogonal axes,
18 shocks total |
| |
Physical Dimensions
|
| Dimensions (HWD) |
14"H x 18.4"W x 15.3"D (355 x 467 x
390 mm) |
| Weight |
58 lbs. (26.4 kg) |
| Shipping Weight |
76.0 lbs. (34.5 kg) |
| |
Certifications
|
| Certifications |
CE Compliant, UL and cUL listed;
conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA
C22.2 No. 61010-1-04 |
| |
Warranty and Service
|
| Warranty and Service |
3-year warranty; calibration
recommended annually. Optional service programs include extended
warranty, upgrades, and calibration services. |
| |
Memory Options
|
WM8Zi-S-32
32 Mpts/Ch Memory Option for WaveMaster 8 Zi. SDA 8 Zi,
and DDA 8 Zi. Includes 4 GB RAM standard |
WM8Zi-M-64
64 Mpts/Ch Memory Option for WaveMaster 8 Zi. SDA 8 Zi,
and DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB
total) |
WM8Zi-L-128
128 Mpts/Ch Memory Option for WaveMaster 8 Zi. SDA 8 Zi,
and DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB
total) |
WM8Zi-VL-256
256 Mpts/Ch Memory Option for WaveMaster 8 Zi. SDA 8 Zi,
and DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB
total) |
Sampling Rate Options
|
WM8Zi-2X80GS
80 GS/s on 2 Ch Sampling Rate Option for WaveMaster 8 Zi
(not available for 820Zi, 825Zi or 830Zi).Includes two
separate external interleaving devices with storage case.
|
Computer Upgrade
|
GPIB-2
GPIB Option for LeCroy oscilloscope. Half-height card with
custom connector. |
WM8Zi-4-UPG-8GBRAM
Upgrade from 4 GB to 8 GB CPU RAM |
WM8Zi-500GB-HD
Upgrade from Standard Size Hard Drive to 500 GB Hard Drive
|
WM8Zi-160GB-RHD-02
Additional 160 GB Hard Drive. Includes Windows Vista OS,
LeCroy Oscilloscope Software and Critical Scope
Operational File Duplicates |
WM8Zi-500GB-RHD-02
Additional 500 GB Hard Drive. Includes Windows Vista OS,
LeCroy Oscilloscope Software and Critical Scope
Operational File Duplicates |
Serial Data Analysis
|
WM8Zi-SDAII
SDA II Serial Data Analysis Option WM8Zi-SDAII (Standard
on SDA 8 Zi and DDA 8 Zi) |
WM8Zi-CBL-DE-EMBED
Cable De-Embed Option (Standard on SDA 8 Zi and DDA 8 Zi)
|
WM8Zi-EYEDRII
Eye Doctor II Advanced Signal Integrity Tools |
Synchronize Oscilloscope Options
|
Zi-8CH-SYNCH
HW Kit to allow combination of channels from two 8Zi
oscilloscopes |
Serial Data Compliance
|
QPHY-DDR2
QualiPHY DDR2 Compliance Software Option |
QPHY-DDR3
QualiPHY Enabled DDR3 Software Option |
QPHY-DisplayPort
QualiPHY Enabled DisplayPort Software Option |
QPHY-ENET
QualiPHY Ethernet Application Software |
QPHY-HDMI
QualiPHY Enabled HDMI Software Option
(TF-HDMI-3.3V-QUADPAK required;WavePro 760Zi requires SDA
II option) |
QPHY-PCIe
PCIe Gen1 Compliance and Development Software |
QPHY-SAS2
QualiPHY SAS2 Compliance Software |
QPHY-SATA
QualiPHY Enabled SATA Software Option |
QPHY-USB
USB Application Software Package |
QPHY-USB3-Tx-Rx
QualiPHY Enabled USB 3.0 Software Option |
QPHY-UWB
WiMedia UWB Transmitter Measurement Software Option |
WM8Zi-ET-PMT
Electrical Telecom Mask Test Software Package |
WM8Zi-SDM
Serial Data Mask Software Package (Standard on SDA 8 Zi
and DDA 8 Zi) |
TF-DSQ
Probe Deskew and Calibration Fixture |
TF-ENET-B
10/100/1000Base-T Compliance Test Fixture |
TF-ET
Telecom Adaptor Kit 100Ω, 120Ω, 75Ω |
TF-SATA-C
SATA Compliance Test Fixture (*WavePro 7 Zi and WaveMaster
8 Zi class oscilloscopes require the SDA II software
option; **20M memory required) |
TF-SATA-C-Kit
SATA Compliance Test Kit (*WavePro 7 Zi and WaveMaster 8
Zi class oscilloscopes require the SDA II software option;
**20M memory required) |
TF-USB-B
USB 2.0 Testing Compliance Test Fixture |
TF-USB3
USB 3.0 Test Fixture Set TF-USB3 ("A" male, "A" female,
"B" female) |
High Speed Output Accessories
|
LSIB-1
High speed PCIe Gen1 x4 digitizer output for LeCroy
oscilloscope. Half-height card with custom connector |
LSIB-HOSTBOARD
PCI Express x4 Host Interface Board for desktop PC |
LSIB-HOSTCARD
PCI Express x1 Express Card Host Interface for laptop
Express Card slot |
LSIB-CABLE-3M
PCI Express x 4 3-meter cable with x4 cable connectors
included |
LSIB-CABLE-7M
PCI Express x 4 7-meter cable with x4 cable connectors
include |
Mixed Signal Solutions
|
MS-500
500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch
Mixed Signal Oscilloscope Option |
MS-500-36
250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch
Mixed Signal Oscilloscope Option |
MS-250
250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch
Mixed Signal Oscilloscope Option |
Jitter Analysis Software
|
WM8Zi-JTA2
Jitter Timing and Analysis Software Package (Standard on
SDA8 Zi and DDA 8 Zi) |
Other Software Options
|
WM8Zi-XDEV
Advanced Customization Software Package |
WM8Zi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option |
WM8Zi-EMC
EMC Pulse Parameter Software Package |
Data Storage Software
|
WM8Zi-AORM
Advanced Optical Recording Measurement Package |
WM8Zi-DDM2
Disk Drive Measurements Software Package (Standard on DDA
8 Zi) |
WM8Zi-DDA
Disk Drive Analyzer Software Package |
Power Analysis Software
|
WM8Zi-PMA2
Power Measure Analysis Software Package |
Digital Filtering Software
|
WM8Zi-DFP2
Digital Filter Software Package |
Miscellaneous
|
OC1024
OC1024 scope cart is sturdy and mobile |
OC1021
OC1021 scope cart is sturdy and mobile |
KYBD-1
Keyboard |
FRONT-COVER-1
Replacement Protective Front Cover for WavePro Zi Series
|
ZI-EXTDISP-15
Top-mounted, Fully Integrated 15.3" WXGA with Touch Screen
Display, Including all Cabling and Software |
WM8Zi-HARDCASE
Hard Carrying Case |
WM8Zi-SOFTCASE
Soft Carrying Case |
WM8Zi-RACKMOUNT
Rackmount Accessory for Converting aWM8Zi Series
Oscilloscope to an 8U Rack-mounted Package |
TTL-AUX-OUT
Accessory for Zi oscilloscopes to enable TTL level output
from the Aux Out connector |
Zi-FrontPanel
Removable front panel for WavePro 7Zi and WaveMaster 8Zi
Oscilloscopes |
Zi-FrontPanel-4Ch
Removable front panel with 4 independent channel controls
for WavePro 7Zi and WaveMaster 8Zi Oscilloscopes |
Current Probes
|
CP030
30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak
Pulse |
CP031
30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak
Pulse |
AP015
30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse
|
CP150
150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak
Pulse |
CP500
500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak
|
Differential Amplifiers
|
DA1855A
DA1855A, 100 MHz Differential Amplifier with fast over
drive recovery, calibrated offset, and selectable LP
filters |
DA1855A-PR2
2 Ch, 100 MHz Differential Amplifier with fast over drive
recovery, calibrated offset, and selectable LP filters
|
DA1855A-PR2-RM
Rack mountable version of the DA1855A-PR2 |
DA18000
18 GHz Differential Amplifier (SDA 18000 only) |
DA1855A-RM
DA1855A with rackmount |
Differential Probes
|
D2505
WaveLink D2505 25 GHz/1.6Vp-p Differential Probe with
Dxx05-SI Solder-In Tip (Qty. 2). |
D2005
WaveLink D2005 20 GHz/1.6Vp-p Differential Probe with
Dxx05-SI Solder-In Tip (Qty. 2). |
D1605
WaveLink D1605 16 GHz/1.6Vp-p Differential Probe with
Dxx05-SI Solder-In Tip (Qty. 2). |
D1305
WaveLink D1305 13 GHz/1.6Vp-p Differential Probe with
Dxx05-SI Solder-In Tip (Qty. 2). |
WL-PLink-A
WaveLink ProLink Platform/Cable Assembly Kit for >=13 GHz
WaveLink Probes. |
WL-2.92MM
WaveLink 2.92mm Platform/Cable Assembly Kit for >=20 GHz
WaveLink Probes. |
DA18000AC
18 GHz Type “K” Differential Probe, AC Coupled |
D13000PS
13 GHz Differential Probe System |
D11000PS
11 GHz Differential Probe System |
WL-Pbus
WaveLink ProBus probe body = 3.5 GHz |
WL-PLink
WaveLink ProLink probe body >3.5 GHz |
D500PT
WaveLink 6 GHz Differential Positioner Mounted Tip Module
|
D600A-AT
WaveLink 7.5 GHz Differential Probe with Adjustable Tip
Module |
D310
WaveLink 3.5 GHz Differential probe module 2.5V |
D610
WaveLink 6 GHz Differential probe module 2.5V |
D320
WaveLink 3.5 GHz Differential probe module 5V |
D620
WaveLink 6 GHz Differential probe module 5V |
AP033
500 MHz Active Differential Probe |
AP034
1 GHz Active Differential Probe |
High Voltage Probes
|
PPE1.2KV
10:1/100:1 200/300 MHz 5M Ohm/100M Ohm |
PPE20KV
1000:1 100 MHz 100M Ohm High-Voltage Probe |
PPE2KV
100:1 400 MHz 100M Ohm High Voltage Probe |
PPE4KV
100:1 400 MHz 100M Ohm High-Voltage Probe |
PPE5KV
100:1 400 MHz 100M Ohm High-Voltage Probe |
PPE6KV
1000:1 400 MHz 5M Ohm High-Voltage Probe |
High Voltage Differential Probes
|
AP031
15 MHz Differential Probe |
ADP300
High-Voltage Active Differential Probe |
ADP305
High-Voltage Differential Probes From LeCroy |
Optical Probes
|
OE425
Short wavelength O/E Converter (500-870 nm) |
OE455
Long wavelength O/E Converter (950-1630 nm) |
OE525
Short wavelength O/E Converter (500-870 nm) |
OE555
Long wavelength O/E converter |
Passive Probes
|
PP007-WR-1
Passive Probe, 500 MHz, 2.5mm tip |
PP011-1
PP011 Passive Probe |
Probe Parts and Kits
|
LPA-SMA-A
Pro-Link to SMA Adapter, new style |
LPA-SMA-KIT-A
Kit of Pro-Link to SMA Adapter, new style |
LPA-K-A
ProLink to K/2.92 mm Adapter |
LPA-K-KIT-A
Kit of ProLink to K/2.92 mm Adapters |
DXX05-SI-RESISTORS
Replacement SI Resistor Kit for Dxx05-SI Solder-In Tip
|
D1X05-SI
Replacement D1x05-SI 13-16 GHz Solder-In Lead with Qty. 10
Spare Resistors. For warranted accuracy, amplifier must be
returned to factory for calibration with this lead. |
Dx10-SI
Replacement Solder tip lead set for D310/D610 |
D2005-SI
Replacement D2005-SI 20 GHz Solder-In Lead with Qty. 10
Spare Resistors. For warranted accuracy, amplifier must be
returned to factory for calibration with this lead. |
Dx10-SP
Replacement Square Pin lead set for D310/D610 |
Dx20-QC
Replacement Quick Connect lead set for D320/D620 |
D13000SI
Replacement Solder-In Interconnect Lead |
Dx20-SI
Replacement Solder tip lead set for D320/D620 |
D13000SMP
Replacement SMP Interconnect Cables |
Dx20-SP
Replacement Square Pin lead set for D320/D620 |
D13000SMA
Replacement SMA Interconnect Cables |
D11000SI
Replacement solder-in interconnect lead |
D11000SMP
SMP Interconnect Leads |
D11000SMA
Replacement SMA Interconnect Cables |
D600ST
WaveLink 7 GHz Differential Probe with Small Tip Module
(includes D6000ST-SI, D600ST-QC, D600ST-SP) |
D350ST
WaveLink 4 GHz, 5 V Differential with Small Tip Module
|
D300A-AT
WaveLink 4 GHz Differential Probe with Adjustable Tip
Module |
Dx10-PT
Replacement Dx10-PT Tip with Qty. 4 Pogo Pin Tips and Qty.
2 Sockets |
Dx20-PT
Replacement Dx20-PT Tip with Qty. 4 Pogo Pin Tips and Qty.
2 Sockets |
Dx10-PT-KIT
WaveLink Dx10-PT Adjustable Positioner Tip Kit. Includes
XYZ Positioner Assembly with Mechanical Interconnects,
Adhesive Kit, Connection Guides, Hand-held Wand, and
Replacement Pins(Qty. 4)/Sockets(Qty 2). |
Dx20-PT-KIT
WaveLink Dx20-PT Adjustable Positioner Tip Kit. Includes
XYZ Positioner Assembly with Mechanical Interconnects,
Adhesive Kit, Connection Guides, Hand-held Wand, and
Replacement Pins (Qty. 4)/Sockets(Qty. 2). |
|
|
|
Eye
Doctor II 信号品質ツールによる高精度の測定
す。その結果、他のオシロスコープと比べて10〜100倍の処理速度が実現されます。
