| |
|
WaveMaster 8 Zi Series
WaveMaster 8 Zi는 세계에서 가장 빠른 대역폭과 샘플링 속도를 제공하는 고성능 오실로스코프로서 높은 대역폭에서의 신호 포착 속도를 극대화해주고 10-100배 더 빠른 분석 프로세싱 속도를 제공하는 X-Stream II 아키텍처 기술과 즉각적인 응답속도, 그리고 동급 스코프보다 20배 더 빠른 데이터 전송 속도를 제공합니다. 대역폭 업그레이드를 완벽하게 지원하여
새로이 등장하는 고속 기술과 시리얼 데이터 표준에 대응할 수 있습니다.
- 4 GHz ~ 30 GHz 대역폭
- 최고 80 GS/s 샘플 속도
- 최대 512 Mpts 분석 메모리
- 50 Ω 과 1 MΩ 입력
- Eye Doctor™ II 고급 신호 품질 툴
혁신적인 대역폭 업그레이드
르크로이는 커스텀 디자인의 SiGe 고속 컴포넌트와 5세대 DBI (Digital Bandwidth Interleave) 기술을 결합하여 대역폭 장벽을 없애고 최고의 실시간 오실로스코프 성능을 구현할 수 있습니다: 30 GHz, 80 GS/s, 512 Mpts/Ch 분석 메모리.
가장 뛰어난 오실로스코프 플랫폼
X-Stream II 아키텍처는 512 Mpts의 긴 분석 메모리로 10-100배 더 빠른 프로세싱 속도와 매우 빠른 장비 응답 속도를 제공합니다. 오프라인 데이터 분석이 필요할 때 르크로이의 LSIB (LeCroy Serial Interface Bus) 시리얼 인터페이스를 통해 초당 325M의 속도로 데이터를 전송할 수 있습니다. 15.3'' WXGA 터치스크린이 동급 스코프보다 50% 더 확장된 관측 화면을 제공합니다. 50 Ω 과 1 MΩ 입력을 기본 내장하여 외부 어댑터나 전원을 확장할 필요 없이 수동 프로브를 비롯한 모든 르크로이 프로브를 이용할 수 있습니다.
Eye Doctor™ II 고급 신호 품질 툴-더 정밀한 측정
- 테스트 픽스쳐와 케이블 디-임베딩
- 엠퍼시스 에뮬레이션
- 시리얼 데이터 채널 에뮬레이션
- 리시버 에뮬레이션
픽스쳐에서 발생 가능한 왜곡을 제거하여 신호 품질을 더욱 정확하게 측정하고, 매우 긴 포착시에도 아주 빠른 프로세싱 속도를 유지하면서 동시에 엠퍼시스 에뮬레이션, 시리얼 데이터 채널, 리시버 DFE, FFE, CTLE 이퀄라이제이션을 수행합니다. 디자인 마진을 포착하고, 실재 회로 성능을 더 잘 이해할 수 있으며 PCIe Gen3, USB 3.0, SAS/SATA 6 Gb/s 등 높은 신뢰성과 상호운영성에 대한 에뮬레이션이 필요한 최신 고속 시리얼 표준에 대한 컴플라이언스 테스팅을 수행합니다.
탁월한 시리얼 데이터 분석
SDA II 시리얼 데이터 분석 소프트웨어가 시리얼 데이터 테스팅에 자심감을 더해 드립니다. 아이 다이어그램 분석은 100배 더 빠른 유닛 인터벌 포착을 제공합니다. 비트 에러율 표시(IsoBER)와 Mask Violation Locator 등의 향상된 아이 다이어그램 분석 툴을 지원합니다. 탁월한 지터 분해 방식과 분석 툴들이 시리얼 데이터 시스템에서 문제점 동작을 이해하도록 도와줍니다. X-Stream II 아키텍처는 10-100배 빠른 프로세싱 속도를 통해 뛰어난 툴들의 활용성을 높여주며 모든 메모리를 사용할 때에도 매우 빠른 속도로 분석 프로세싱을 수행합니다.
5세대 디지털 대역폭 인터피브 기술 (DBI)
메모리와 샘플 속도가 인터리브될 때 대역폭을 확장할 수 있습니다. 고성능 마이크로웨이브와 RF 기술, 그리고 고속 프로세서와 DSP를 사용함으로써 르크로이는 보증된 대역폭 내에서 4채널의 대역폭을 2채널에서 2배로 실현하여 고속 아나로그 컴포넌트들을 동작시킵니다. 이 접근법은 보증된 대역폭 이상으로 컴포넌트를 확장하는 방식에 비해 더 나은 신호
무결성을 제공합니다.
대역폭, 샘플 속도, 프로세싱 속도, 응답 속도, 디스플레이 크기 및 기능면에서 WaveMaster 8 Zi 플랫폼은 동급의 스코프보다 혁신적이며 뛰어납니다. 다양한 대역폭 범위는 엔지니어들이 현재의 2세대 기술에서부터 수년 후 3세대, 4세대 기술까지 지원할 수 있도록 합니다.
X-Stream II 아키텍처
빠른 출력 속도에 최적화된 기술
X-Stream II 아키텍처는 오실로스코프가 다양한 100Mpts(or larger) 길이의 파형을 수집할 때 매우 높은 데이터 출력 속도를 보장해 주는 기술입니다. X-Stream II는 다양한 파형 조각의 길이를 활용하여 빠른 CPU 캐시 메모리에서 일어나는 모든 프로세싱 계산을 수행하며, 계산 속도와 효율성을 개선하였습니다. 그 결과 경쟁 스코프보다 10-100배 더 빠른 프로세싱 속도를 지원합니다.
긴 메모리에 최적화된 기술
X-Stream II는 본질적으로 분석 타입에 관계없이 분석 메모리 길이에 제한이 없습니다. 다양한 파형 조각의 길이가 항상 CPU 캐시 메모리에 맞게 할당될 수 있기 때문에 가능합니다. 기존 방식의 다른 스코프들은 이러한 구조가 없으므로 최상의 조건에서 포착 메모리 길이의 50%만들 분석 메모리로 사용할 수 있습니다.
빠른 응답 속도
동적으로 버퍼를 할당하여 메모리 사용을 극대화해 주는 WaveMaster 8 Zi 시리즈는 가장 빠른 프런트 패널 응답성을 가집니다. 내장된 프로세싱 중단 기능이 현재의 처리 작업을 중단하고 새로운 파형을 배치 및 확대하도록 프런트 패널 제어를 변경하는 동시에, 파형 미리보기 기능이 임시 계산 결과를 보여주므로 처음부터 다시 계산할 필요가 없습니다.
제한없는 프로브 활용성
WaveMaster 8 Zi는 범용 유틸리티를 사용하는 방식에서 4 - 30 GHz 대역의 오실로스코프에서는 볼 수 없었던 탁월한 활용성을 제공합니다. 모든 WaveMaster 8 Zi 오실로스코프는 50 Ω 과 1 MΩ 입력을 탑재하여 르크로이 수동 프로브 또는 능동 프로브를 외부 어댑터나 전원 공급 없이 사용할 수 있습니다. 채널당 2개의 입력과 내장된 스위치 매트릭스를 지원합니다.
완벽한 시스템 디버깅
서로 다른 신호간의 관련성을 파악하는 것은 빠른 디버깅을 위해 필수적입니다. 오직 WaveMaster 8 Zi만이 범용 스코프 어플리케이션 (저속 시리얼 트리거 & 디코드, 혼합 신호 측정, 고 임피던스 프로빙 등)과 50 Ω 입력을 지원합니다. 이 기능은 고 대역폭 신호 동작 또는 문제점들과 저속 이벤트 (e.g. 저속 시리얼 데이터 제어 언어, 전원 공급 노이즈 또는 병렬 데이터 전송)의 관련성을 100% 완벽하게 연관시킵니다. 지원되는 시리얼 표준에는 8b10b, PCIe, SAS, SATA, XAUI, I2C, SPI CAN, LIN, UART-RS-232, FlexRay 등이 있습니다.
더 많은 이상 파형을 더 효율적으로 트리거
모든 범위의 시리얼 트리거 (I2C, SPI, UART, RS-232, CAN, LIN, FlexRay)가 지원되며, 시리얼 주변기기 버스 트래픽에 관련된 이벤트만을 분리해낼 수 있습니다. 강력한 조건 데이터 트리거를 제공하므로 모든 범위의 데이터값에 대하여 포함 또는 제외
조건을 설정하여 트리거할 수 있습니다. 다양한 시리얼 버스 트래픽 데이터값이 다른 신호와 서로 어떻게 관련되어 있는지 쉽게 이해하도록 돕습니다.
TriggerScan™
TriggerScan은 고속 하드웨어 트리거 기능과 퍼시스턴스 디스플레이 기능을 이용하여 오직 관심 신호만을 포착하고 다른 방법을 사용할 때보다 최고 100배 더 빠르게 답을 구해냅니다.
WaveScan™ 검색 & 분석 툴이 트리거로 찾기 힘든 문제점을 찾아줌
어떤 트리거로도 모든 비정상 이벤트를 찾아낼 수는 없습니다. WaveScan은 비정상 이벤트들은 단일 포착 (i.e., 포착 및 검색)하거나 오랜 기간 수집한 이벤트에 대해서 "스캔"하는 기능을 제공합니다. 20여개 이상의 다양한 검색 모드 (주파수, 상승시간, 런트, 듀티 사이클 등)를 선택하여 조건을 선택하고 스캔을 시작합니다. 이벤트가 발견되면 WaveScan이 화면에 오류를 구분하여 표시하고 오류 검색 결과를 표 형식으로 배열하여 보여줍니다.
25-100배 빠른 데이터 전송 속도
르크로이의 LSIB (LeCroy Serial Interface Bus) 옵션을 통해 PCI Express X4 고속 데이터 버스를 오실로스코프에 직접 연결할 때 최고 325 Mbps의 속도로 전송할 수 있습니다. 옵션 LSIB 카드와 원격 제어할 PC의 호스트 카드를 설치하면 즉시 사용할 수 있습니다. 데이터 전송은 함께 제공되는 어플리케이션 프로그램 인터페이스 (API)를 이용하면 됩니다.
어플리케이션 별 솔루션
일반적인 목적의 파형 분석 툴 외에, 시리얼 데이터 컴플라이언스, 임베디드 디자인, 디지털 디자인 그리고 오토모티브 등 특정 응용 분야의 솔루션을 제공합니다. 이 패키지들은 르크로이 기본 측정과 분석 기능을 특정 응용분야의 테스트 전용 장비로 확장시킬 수 있습니다.
- 디지털 필터 소프트웨어 패키지 (WM8Zi-DFP2)
- 스펙트럼 분석기 분석 패키지 (WM8Zi-SPECTRUM)
- 혼합 신호 오실로스코프 옵션 (MS-250/MS-500)
- 지터와 타이밍 분석 패키지 (WM8Zi-JTA2)
- Eye Doctor II 고급 신호 품질 측정 툴 (WM8Zi-EYEDRII)
WaveMaster 804Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
4 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
95 ps
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
71 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of ProLink and ProBus inputs)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz
|
Input Impedance
|
|
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable; 1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 600 fsrms (TIE, typical)
For Acq. Length >10μs: 650 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
2 div @ < 4 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 806Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
6 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
63 ps
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
47 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of ProLink and ProBus inputs)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz
|
Input Impedance
|
|
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable; 1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 450 fsrms (TIE, typical)
For Acq. Length >10μs: 500 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
2 div @ < 6 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 808Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
8 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
49 ps
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
37 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of ProLink and ProBus inputs)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz
|
Input Impedance
|
|
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable; 1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 400 fsrms (TIE, typical)
For Acq. Length >10μs: 450 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
2 div @ < 8 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 813Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
13 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
32.5 ps
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
24.5 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of ProLink and ProBus inputs)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz
|
Input Impedance
|
|
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable; 1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 375 fsrms (TIE, typical)
For Acq. Length >10μs: 425 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
3 div @ < 13 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 816Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
28.5 ps
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
21.5 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of ProLink and ProBus inputs)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
(For any two ProLink input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable; 1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?140 mV/div
(±10V @ 142mV-1.40V/div
(±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 290 fsrms (TIE, typical)
For Acq. Length >10μs: 340 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(optional WM8Zi-2X80GS External Interleaving Device permits 80 GS/s on 2ch with twice the memory)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 820Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
20 GHz
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
20 ps (@ full BW)
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
15 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of 16 GHz ProLink inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW)
|
Bandwidth Limiters
|
|
For <20 GHz Mode: 20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: None
|
Input Impedance
|
|
2.92mm Inputs: 50 Ω+/-2% for ≤79 mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV?500 mV/div, fully variable
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable
1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
(±500 mV @ 2?79 mV/div
(±4 V @ 80 mV/div -500 mV/div
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?128 mV/div
(±10V @ 130mV-1.28V/div
(±100V @ 1.3V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥20 GHz Mode: Real-Time Mode, 20 ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 265 fsrms (TIE, typical)
For Acq. Length >10μs: 300 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch when operated in ≥20 GHz Mode)
|
Random Interleaved Sampling (RIS)
|
|
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) 2.92mm Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in ≥ 20 GHz Mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (2) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 825Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
25 GHz
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
17.5 ps (@ full BW)
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
13 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of 16 GHz ProLink inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW)
|
Bandwidth Limiters
|
|
For <20 GHz Mode: 20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: 20 GHz
|
Input Impedance
|
|
2.92mm Inputs: 50 Ω+/-2% for ≤79 mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV?500 mV/div, fully variable
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable
1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
(±500 mV @ 2?79 mV/div
(±4 V @ 80 mV/div -500 mV/div
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?128 mV/div
(±10V @ 130mV-1.28V/div
(±100V @ 1.3V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥20 GHz Mode: Real-Time Mode, 20 ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 235 fsrms (TIE, typical)
For Acq. Length >10μs: 275 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch when operated in ≥20 GHz Mode)
|
Random Interleaved Sampling (RIS)
|
|
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) 2.92mm Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A, B, C, or D event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog)
|
Holdoff
|
|
Holdoff between A and B, B and C, or both is selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, or both is selectable in time or number of events
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s - 2.7 Gb/s, 3.0, 3.125 Gb/s
|
Pattern Length
|
|
80 bits, NRZ or 8b10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 2.488 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in ≥ 20 GHz Mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
Operation
|
|
Front panel toggle between WaveStream ON (Analog), ON (Color) and OFF
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (2) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
up to 325 MB/s (typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over a network, or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15 pin D-Type WXGA compatible to support customer-supplied external monitor.
DVI connector to support LeCroy WPZi-EXTDISP-15 additional touch screen display accessory.
Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Connector Type
|
|
BNC, located on front
|
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz?5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0?1 V into 1 MΩ)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status, off
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14"H x 18.4"W x 15.3"D (355 x 467 x 390 mm)
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually.
Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveMaster 830Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
30 GHz
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
15.5 ps (@ full BW)
(test limit, flatness mode)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
11.5 ps
(flatness mode)
|
Input Channels
|
|
4 (Any combination of 16 GHz ProLink inputs or 3.5 GHz ProBus inputs),
3 (1 @ full BW, 2 with ProLink or ProBus inputs), or
2 (@ full BW)
|
Bandwidth Limiters
|
|
For <20 GHz Mode: 20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
For ≥20 GHz Mode: 20 GHz, 25 GHz
|
Input Impedance
|
|
2.92mm Inputs: 50 Ω+/-2% for ≤79 mV/div, 50 Ω+/-3% for >79 mV/div
ProLink Inputs: 50 Ω+/-2% for ≤100 mV/div, 50 Ω+/-3% for >100 mV/div
ProBus Inputs: 50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@≤100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Channel-Channel Isolation
|
|
DC to 10 GHz: 50 dB (>315:1)
10 to 15 GHz: 46 dB (>200:1)
15 to 16 GHz: 40 dB (>100:1)
16 GHz to Max BW: 30 dB (>32:1)
(For any two ProLink or 2.92mm input channels, same or different v/div settings, typical)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV?500 mV/div, fully variable
50 Ω (ProLink): 2 mV?1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV?1 V/div, fully variable
1 MΩ (ProBus): 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
(±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
(±500 mV @ 2?79 mV/div
(±4 V @ 80 mV/div -500 mV/div
50 Ω (ProLink):
(±500 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
50 Ω (ProBus):
(±750 mV @ 2?100 mV/div
(±4 V @ >100 mV/div -1 V/div
1 MΩ:
(±1V @ 2?128 mV/div
(±10V @ 130mV-1.28V/div
(±100V @ 1.3V-10V/div
|
Offset Accuracy
|
|
(±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥20 GHz Mode: Real-Time Mode, 20 ps/div - 12.5μs/div, depending on memory length
For <20 GHz Mode: 20 ps/div?128 s/div (Real-Time Mode: 20 ps/div - 64 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: 100 ms/div up to 128 s/div), depending on memory length
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
For Acq. Length ≤10μs: 200 fsrms (TIE, typical)
For Acq. Length >10μs: 240 fsrms (TIE, typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
(±9 x time/div. setting or 25 ns max. (whichever is larger), each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, output at the rear
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch
(80 GS/s on 2 Ch when operated in ≥20 GHz Mode)
|
Random Interleaved Sampling (RIS)
|
|
For ≥20 GHz Mode: Not Applicable
For <20 GHz Mode: 200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 μs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
10 M / 10 M
(20 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(128 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M
(256 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
VL ? Memory Option
|
|
256 M / 256 M
(512 Mpts in 2 Ch mode when operated in ≥20 GHz Mode)
(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, Line, or Fast Edge. Slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
(±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) 2.92mm Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC coupling, ≥ 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProLink Inputs
|
|
3 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, ≥ 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ ≥ 10 mV/div (minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Holdoff between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
|
