| |
|
SDA 7 Zi 시리즈
SDA 7 Zi 시리얼 데이터 분석기는 WavePro 7 Zi 시리즈와 동일한 시스템 구조이고 아이 다이어그램에서 더 많은 인터벌을 포착하도록 2배 더 긴 메모리를 기본으로 제공합니다. 2.7 Gb/s 속도에서 80비트 패턴을 이용한 고속 시리얼 패턴 트리거를 수행합니다. 아이패턴 실패 또는 다른 컴플라이언스 테스트가 실패해도 SDA 7 Zi 시리즈는 해당 부분으로 쉽게 접근할 수 있는 툴을 제공합니다.
- 르크로이의 독특한 요약 디스플레이 기능은 Eye Pattern, TIE, Bathub Curve 및 지터 지터 히스토그램을 모두 오실로스코프 화면에 동시에 표시합니다
- De-Embed 케이블은 모든 SDA에서 가능하며 측정 시스템에서 케이블이 포함되지 않았을 때의 결과를 확인할 수 있습니다
- 시리얼 데이터 검증 테스팅: Ethernet, USB 2.0, HDMI 1.2, PCI Express (2.5 GT/s), Serial ATA (1.5 Gb/s), UWB
시리얼 데이터의 완벽한 솔루션
뛰어난 시리얼 데이터 분석이 컴플라이언스 테스트는 물론이고 디바이스 또는 호스트가 왜 컴플라이언스에서 실패했는지, 디자인의 특성 파악 및 이해를 도와줍니다. SDA의 요약보기에서는 아이다이어그램, TIE, BathTub 커브 및 지터 히스토그램 4가지를 항상 보여줍니다. 다른 어떠한 분석기에서도 실시간으로 변화되는 입력신호에 대해 4가지 결과가 변환되는 상호 관련성을 보여줄 수 없습니다. X-Stream II 기술이 빠른 업데이트와 아이 분석을 빠르게 수행합니다. 고속 시리얼 트리거는 최고 2.7 Gb/s 속도에서 80비트 패턴 트리거가 가능합니다. 통계 기반의 지터 측정을 제공합니다. 256M의 가장 긴 메모리와 X-Stream II 기술을 통해 가장 짧은 시간안에 지터 브레이크다운과 빠른 결과를 얻어낼 수 있습니다.
자동 컴플라이언스 테스팅
컴플라이언스 테스트 소프트웨어 QualiPHY는 광범위한 시리얼 데이터 컴플라이언스 테스팅을 수행하도록 모든 측정 과정을 그림으로 안내하여 쉽게 테스팅을 수행하는 기능을 제공합니다. 빠른 자동 테스트와 연결 다이어그램과 지시 사항을 제공하여 전체과정을 매우 간단하게 안내하고 있습니다. 테스트가 완료되면 테스트 결과가 보고서로 제공되며, 패일이 발생하는 경우 진행과정에서 디버깅 프로세스로 진입할 수 있는 기능을 가지고 있습니다.
아이 패턴 실패의 경우 또는 다른 컴플라이언스 테스트 실패에서도 SDA 시리즈는 해당 부분으로 쉽게 접근할 수 있는 툴을 제공하고 있습니다. 빠르게 귀하의 디자인에서 문제를 발생시긴 소스를 찾아냅니다. 8b/10b 디코드, 마스크 바이올레이션 로케이터, ISI 플롯, 스프레드 스펙트럼 클럭 분석 등의 추가적인 분석에 쉽게 접근할 수 있습니다. Cable DeEmbedded 기능은 케이블의 형식에 따른 S-Parameter 값을 삽입하여 케이블의 효과를 조절하는 기능입니다. 결과적으로 신호 자체의 실재 상승시간, 진폭 등을 케이블의 특성을 제거한 상태에서 측정할 수 있습니다. SDA는 컴플라이언스 실패의 이벤트에서 디자인의 특성을 이해할 수 있도록 유연한 연산 기능을 사용합니다.
시리얼 트리거
SDA 7 Zi 시리즈는 80-비트 패턴 트리거 기능이 기본적으로 탑재되어 있습니다. SDA 760Zi와 SDA 740Zi의 고속 패턴 트리거 옵션은 최대 2.7Gbps의 속도를 지원하며, SDA735Zi, SDA725Zi는 패턴 트리거를 1.25Gbps의 속도까지 지원합니다. 두 가지의 속도 모두 오실로스코프 전면에서 복원 클럭과 데이터 출력 포트를 제공합니다.
8b/10b 디코딩
르크로이 8b/10b 시리얼 디코드 옵션은 아주 강력한 검색 기능을 가지고 있으며 사용자가 정의한 심볼 순서와 값을 가진 파형을 검색할 수 있습니다. 동시에 4개의 레인 신호를 포착하고 멀티 디코딩이 가능합니다.
스프레드 스펙트럼 클럭
르크로이의 긴 포착 메모리와 빠른 샘플링 속도는 스프레드 스펙트럼 클럭 방식을 이용하여 전송되는 데이터의 미세한 부분을 관측하는 데 아주 이상적입니다. 최근에는 33KHz의 낮은 모듈레이션 주파수와 낮은 노이즈가 포함된 스프레드 스펙트럼 방식을 디자인에 사용하고 있습니다. 포착된 메모리 데이터를 모두 빠르게 사용하여 모듈레이션 효과를 관측할 수 있습니다.
마스크 침범 로케이터
마스크 실패는 분석에 사용된 데이터가 어디에서 어떻게 마스크의 경계를 침범하였는지를 식별할 수 있도록 표시합니다. 사용자는 초기 실패때의 저장된 파형을 불러낼 수 있습니다. 실재 비트 데이터 또한 식별할 수 있으며, 어떠한 ISI 문제도 바로 찾아 낼 수 있습니다. 곧바로 다음 침범 위치로 이동하거나 저장되어있는 어떠한 위치로도 이동이 가능합니다.
ISI 플롯
ISI 플롯은 비트 길이의 두 번째부터 마지막 비트의 데이터 패턴이 아이 패턴에 주는 지터의 영향을 관측하는 모드로 비트는 3부터 10까지 설정이 가능합니다. 이 플롯은 일정한 반복 패턴이 필요 없는 데이터의 패턴에 따른 지터를 측정하여 플롯팅합니다.
ɼ
| ø Ʈ & ڵ
| | QPHY-MIPI-DPHY | QualiPHY Enabled MIPI DPHY Compliance Software Option | | WPZi-1553 TD | MIL-STD-1553 Trigger and decode option for WavePro Zi | | WPZi-ARINC429bus DSymbolic | ARINC 429 Bus Symbolic Decode option for WavePro Zi | | WPZi-AudioBus TD | AudioBus trigger and decode for WavePro 7Zi | | WPZi-AudioBus TDG | AudioBus trigger, decode, and graph for WavePro 7Zi | | WPZi-DigRF3Gbus D | DigRF 3G Bus Decode option for WavePro Zi | | WPZi-DPHYbus D | D-PHY Bus Decode option for WavePro Zi | | WPZi-FlexrayBus TD | FlexRay Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-FlexRayBus TDP | FlexRay Bus Trigger, Decode, and Physical Layer Test Option for WavePro Zi Series Oscilloscopes | | WPZi-I2Cbus TD | I2C Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-LINbus TD | LIN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-PCIEbus D | PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro 7 Zi SeriesOscilloscopes and Analyzers | | WPZi-PROTObus MAG | Serial Debug Toolkit - Measure Analyze Graph for WavePro ZiCompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553 | | WPZi-ProtoSync | Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro Zi | | WPZi-ProtoSync-BT | Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro Zi | | WPZi-SPIbus TD | SPI Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-UART-RS232bus TD | UART and RS232 Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-USB2bus D | USB 2.0 Bus Decode option for WavePro Zi | | WPZi-USB3bus D | USB 3.0 Decode option for WavePro ZiSupports USB 3.0, 2.0, 1.x | ø Ʈ Ʈ
| | QPHY-DDR2 | QualiPHY Enabled DDR2 Compliance Software Option | | QPHY-DDR3 | QualiPHY Enabled DDR3 Compliance Software Option | | QPHY-ENET | QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option | | QPHY-HDMI | QualiPHY Enabled HDMI Compliance Test Software | | QPHY-PCIe | QualiPHY Enabled PCIe Gen1 and Gen2 Compliance Software Option | | QPHY-SATA-TSG-RSG | QualiPHY Enabled SATA (PHY, TSG, OOB and OOB) Compliance Software Option | | QPHY-USB | QualiPHY Enabled USB 2.0 Compliance Software Option | | QPHY-UWB | QualiPHY Enabled WiMedia UWB Compliance Software Option | Ʈ
| | WPZi-AORM | Advanced Optical Recording Measurement Package for WavePro Zi Series | | WPZi-EMC | EMC Pulse Parameter Software Package for WavePro Zi Series | | WPZi-EYEDRII | Eye Doctor II Advanced Signal Integrity Tools for WavePro 7 Zi Oscilloscopes, SDA 7 ZiSerial Data Analyzers, and DDA 7 Zi Disk Drive Analyzers | | WPZi-SPECTRUM | Spectrum Analyzer and Advanced FFT Option for WavePro Zi Series | Ʈ
| | WPZi-DFP2 | Digital Filter Software Package for WavePro Zi Series | 丮 Ʈ
| | WPZi-DDM2 | Disk Drive Measurements Software Package for WavePro Zi Series | м Ʈ
| | WPZi-PMA2 | PowerMeasure Analysis Software Package for WavePro Zi Series | CAN Bus
| | WPZi-CANbus TD | CAN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes | | WPZi-CANbus TDM | CAN Bus Trigger, Decode, and Measure Option for WavePro Zi Series Oscilloscopes | ȥ ñ׳ Ʈ ַ
| | MS-250 | 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500 | 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500-36 | 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option | | MSO-3M | 18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002) | | MSO-MICTOR | 36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD) | | PK400-1 | Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads | | PK400-2 | Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads | | PK400-3 | Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads | ſ Ʈ Ƚ
| | ENET-2ADA-BNCSMA | Adapter Set- 2 BNC/M to SMA/F | | ENET-2CAB-SMA018 | Cable Set- 2 SMA-SMA 18 inches | | ENET-2CAB-SMA036 | Cable Set- 2 SMA-SMA 36 inches | | TF-DSQ | Probe Deskew and Calibration Test Fixture | | TF-ENET-B | 10/100/1000BaseT Ethernet Test Fixture | | TF-ET | Electrical Telecom Adapters | | TF-HDMI-3.3V-QUADPAK | HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter | | TF-SATA-C | SATA 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s Compliance Test Fixture | | TF-SATA-C-Kit | SATA Compliance Test Kit | | TF-USB-B | USB 2.0 Compliance Test Fixture |
| | DA101 | 10:1 1 MOhm Passive Attenuator | | DA1855A | 1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source | | DA1855A-PR2 | 2 Ch, 100 MHz, Differential Amplifier with Precision Voltage Source | | DA1855A-PR2-RM | 2 Ch, DA1855A with Rackmount (must be ordered at time of purchase, no retrofit) | | DA1855A-RM | DA1855A with rackmount; | | DXC-5100 | 100:1 250 MHz 10 Mohm 2.75pf Differential Probe Pair; | | DXC100A | 100 or 10 Selectable, 250 MHz Passive Differential Probe Pair | | DXC200 | 1, 50 MHz, Passive Differential Probe Pair | 丮 ̽
| | GPIB-2 | GPIB Option for LeCroy oscilloscope. Half-height card. | | LSIB-1 | High speed PCIe Gen1 x4 digitizer output for LeCroy oscilloscope. Half-height card | | WPZi-160GB-RHD-02 | Additional 160 GB Hard Drive for WPZi. Includes Windows Vista OS, LeCroy oscilloscope software andcritical scope operational file duplicates. | | WPZi-4-UPG-8GBRAM | Upgrade from 4 GB to 8 GB CPU RAM | | WPZi-500GB-HD | Upgrade from standard size hard drive to 500 GB hard drive | | WPZi-500GB-RHD-02 | Additional 500 GB Hard Drive for WPZi. Includes Windows Vista OS, LeCroy oscilloscope software andcritical scope operational file duplicates. | Ÿ
| | 20dB-SMA-Attenuator | 20 dB SMA Attenuators | | KYBD-1 | Keyboard, USB | | LSIB-CABLE-3M | PCI Express x 4 3-meter cable with x4 cable connectors included | | LSIB-CABLE-7M | PCI Express x 4 7-meter cable with x4 cable connectors include | | LSIB-HOSTBOARD | PCI Express x4 Host Interface Board for desktop PC | | LSIB-HOSTCARD | PCI Express x1 Express Card Host Interface for laptop Express Card slot | | Rise-Time-Filter-100ps | PSPL Rise Time Filter - PSPL Part Number 5915-110-100ps | | Rise-Time-Filter-150ps | PSPL Rise Time Filter - PSPL Part Number 5915-110-150ps | | TTL-AUX-OUT | TTL Auxiliary output adapter for 7Zi and 8Zi oscilloscopes | | Zi-8CH-SYNCH | HW Kit to allow combination of channels from two Zi or Zi-A oscilloscopes. Allows combination of allchannels from two oscilloscopes (8 channels total) or combination of all 20-30 GHz channels from two20-30 GHz 8Zi or 8Zi-A oscilloscopes (4 channels total), or combination of 45 GHz channels | | ZI-EXTDISP-15 | Top-Mounted, fully integrated 15.4" WXGA display, including all cabling and software | | Zi-FrontPanel-4Ch | Removable front panel with 4 independent channel controlsFor use with WavePro 7Zi and WaveMaster 8Zi oscilloscopes | Ʈ, īƮ, ̽
| | RACKMOUNT-1 | Rack-mount accessory for converting a WavePro Zi series oscilloscope to an 8U rack-mounted package | | WPZi-HARDCASE | Hard carrying case for all WavePro Zi Series oscilloscopes | | WPZi-SOFTCASE | Soft carrying case for all WavePro Zi Series oscilloscopes |
κ
| | ADP300 | 1,400 V, 20 MHz High-Voltage Differential Probe | | ADP305 | 1,400 V, 100 MHz High-Voltage Differential Probe | | AP031 | 700 V, 15 MHz High-Voltage Differential Probe (10, 100) | | AP033 | 500 MHz Differential Probe | | AP034 | 1 GHz, Active Differential Probe (1, 10, 20) | | D300A-AT | WaveLink D300 3 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips. 5.8 mVrms (typical)probe + scope noise.Includes Manual and Quick Reference Guide. | | D310 | WaveLink D310 3.5 GHz/2.5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D310-PT | WaveLink D310 3.5 GHz/2.5Vp-p & +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx10-PTAdjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'ywith Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins | | D320 | WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D320-PT | WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx20-PTAdjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'ywith Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins | | D500PT | WaveLink 5 GHz/4.8Vp-p Differential Amplifier Module with Positioner Mounted Tip Module. 5.8 mVrms(typical) probe + scope noise. Includes Tip Replacement Tool, Replacement Pogo Pins (Qty. 2),Freehand Probe Holder, and Manual. | | D600A-AT | WaveLink D600 6 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips. 5.8 mVrms (typical)probe + scope noise.Includes Manual and Quick Reference Guide. | | D610 | WaveLink D610 6 GHz/2.5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D610-PT | WaveLink D610 6 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx10Adjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'yw/Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, & Replacement Pins | | D620 | WaveLink D620 6 GHz/5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D620-PT | WaveLink D620 6 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx20-PAdjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'yw/Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand & Replacement Pins | | WL-Pbus | WaveLink ProBus Platform/Cable Assembly Kit for 4 GHz WaveLink Probes. Includes ProBus Probe Body(attaches Differential Amplifier Small Tip Module and Tip/Lead to LeCroy Oscilloscope ProBus Input),FreeHand Probe Holder, Platform Clamp, Probe Characterization Fixture, Qty. 2 Cable Clamps, Plastic | ɵ κ
| | HFP2500 | 2.5 GHz, 0.7pF Active Voltage Probe(10:1), Small Form Factor | κ
| | AP015 | 30 A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse | | CP030 | 30A, 50MHz Current Probe | | CP031 | 30A, 100MHz Current Probe | | CP150 | 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse | | CP500 | 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse | | DCS015 | Deskew Calibration Source for AP015 | κ
| | PPE1.2KV | 10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC | | PPE20KV | 1000:1 100 MHz 100 MOhms High-Voltage Probe 20kV Max. Volt. DC + 40kVPeak AC | | PPE2KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE4KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE5KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE6KV | 1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe | ZS ø Ǵ ɵ κ
| | ZS1000 | 1 GHz, .9 pF, 1 MOhm Active Voltage Probe | | ZS1000-QUADPAK | Set of 4 ZS1000, 1 GHz High Impedance Active Probes | | ZS1500 | 1.5 GHz, .9 pF, 1 MOhm Active Voltage Probe | | ZS1500-QUADPAK | Set of 4 ZS1500, 1.5 GHz High Impedance Active Probes | κ
| | PP066 | 7.5 GHz low capacitance Passive Probe, 500/1K Ohms | OE
| | OE425 | Optical-to-Electrical Converter, 500-870 nm ProBus BNC Connector | | OE455 | Optical-to-Electrical Converter, 950-1630 nm ProBus BNC Connector | | OE525 | Optical-to-Electrical Converter, 500-870 nm ProLink BMA Connector | | OE555 | Optical-to-Electrical Converter, 950-1630 nm ProLink BMA Connector | κ
| | LPA-SMA-A | Pro-Link to SMA Adapter, new style | | LPA-SMA-KIT-A | Kit of Pro-Link to SMA Adapter, new style | κ Ʈ & ŰƮ
| | Dx10-HiTEMP | WaveLink Temperature Extension cables for Dx10.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set | | Dx10-SI-HiTEMP | Replacement Solder tip leadset for use with D610/D410 and temperature extension cables | | Dx20-HiTEMP | WaveLink Temperature Extension cables for Dx20.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set | | Dx20-SI-HiTEMP | Replacement Solder tip leadset for use with D620/D320 and temperature extension cables | | Dxx0-Cable-HiTemp | Replacement 30" matched cable set for use with HiTemp Solder tip leadset |
|
|
|