| |
|
WaveRunner Xi-A / MXi-A 오실로스코프
The LeCroy WaveRunner Xi-A 는 고급 트리거와 빠른 뷰 모드, 측정 파라메터 또는 시리얼 디코드 등을 통해 기본 시스템 검증이 쉽고 간편한 랩 오실로스코프 입니다. 고급 디버깅과 멀티 도메인 분석, 그리고 파형 분석이 WaveRunner Xi-A의 툴로 제공됩니다. 옵션 어플리케이션 패키지는 엔지니어가 문제를 빠르게 정의할 수 있도록 돕습니다.
- 밝은 10.4" 화면
- 15 cm (6'')의 두께
- 전용 커서 노브
- 확대 조절 노브
- 터치 스크린과 스타일러스 펜 내장
시리얼 데이터 신호에 대한 이해를 향상
I2C, SPI, UART, RS-232, LIN, CAN, FlexRay 시리얼 데이터 패턴에 대한 트리거를 지원합니다. 디코드 결과가 오실로스코프 그리드상에 표시되어 이해가 쉽습니다. 임베디드 콘트롤 시스템에서 디코딩된 데이터 스트림과 다른 이벤트들과의 관련성을 분석합니다(옵션).
강력한 트리거가 관심 이벤트만 분리
광범위한 SMART, 시리얼, 디지털 (MS 시리즈) 트리거 조합을 활용하여 사용자는 관심 이벤트들만을 빠르고 쉽게 검색하여 분리할 수 있습니다(옵션).
WaveStream™ 빠른 보기 모드
높은 샘플 속도와 WaveStream 빠른 보기 모드를 사용하여 신호의 형태, 상승 시간, 오버슈트 등의 특성을 분석할 수 있고 빠른 속도의 과도 전류의 유무를 검증할 수 있습니다.
고급 포착 모드
시퀀스 모드는 포착 메모리를 분할해서 오랜 기간동안 수집한 특정 이벤트들을 포착할 수 있고, 각각의 개별 부분을 관측 및 분석 할 수 있습니다.
완벽한 커스텀 기능
Excel, MATLAB,® 또는 VBScripts를 사용하여 귀하만의 측정 파라메터 또는 연산 기능을 쉽게 구성할 수 있습니다(일부 기능은 옵션).
WaveScan™ 고급 검색 및 분석
WaveScan은 단일 포착시 비정상 이벤트들을 검색하고, 20여개 이상의 검색/스캔 모드를 활용하여 오랜 기간 포착한 이벤트들을 스캔합니다. ScanHisto 또는 ScanOverlay를 사용해 스캔 결과값을 표시합니다.
다양한 어플리케이션 패키지
광범위한 어플리케이션 패키지가 특정 문제점에 대하여 정밀하고 빠른 솔루션을 제공합니다.
프런트 패널의 확대 기능과 긴 메모리
WaveRunner Xi-A의 긴 메모리는 동급의 오실로스코프보다 10-100배 더 빠르게 정보를 계산해내고, 프런트 패널에서 쉽게 확대 및 위치 조절을 할 수 있습니다.
포괄적인 연산 및 측정 기능
기본 및 옵션 측정들이 추가되었고 더욱 강력해진 연산 기능이 다른 오실로스코프보다 더 빠르게 결과를 제공합니다.
타임 도메인 분석
신호의 멀티도메인 분석을 활용하여 이해를 높여줍니다. 신호 정보를 통계 도메인 (Histogram), 스펙트럴 도메인 (긴 메모리 FFTs), 지터, 모듈레이션, 또는 측정 파라메터 도메인 (측정 파라메터의 트랙)으로 변환할 수 있습니다(일부 기능은 옵션).
완벽하게 통합된 툴셋
르크로이의 연산, 측정 및 분석 툴들은 기본적인 스코프 동작에 완벽하게 통합되어 있어서 기능의 사용이 쉽습니다. 제한없이 스코프를 사용하십시오.
프로빙 솔루션
다양한 능동 FET 프로브, 전류 프로브, 차동 프로브, HV 프로브 등과 완벽한 프로브 팁, 그라운드 악세서리가 신호 프로빙을 쉽게 해줍니다.
혼합 신호 오실로스코프 옵션
MS 시리즈는 최고 500 MHz 속도로 디지털 신호를 포착합니다. 최대 36 디지털 채널과 50 Mpts/Ch의 메모리로 관측하고, 아나로그와 디지털 이벤트를 동시에 분석합니다.
파워/앰프 측정
탁월한 오버드라이브 복구와 신호 보전성을 가진 WaveRunner Xi-A는 고전압 스위칭 손실, 유도 손실, 리플, 스위칭 파워 공급, 그리고 기타 앰프 측정에 이상적입니다. 르크로이 차동 증폭기는 100,000:1 CMRR의 고성능을 제공합니다.
타이밍 특성 분석
광범위한 트리거는 빠른 이벤트 검색을 제공합니다. 타이밍을 통계적으로 측정하고 히스토그램을 사용해 타이밍 동작을 그래픽 화면으로 보여줍니다. 문제의 근본적인 원인을 파악할 수 있습니다.
저속/고속 신호를 동시에 처리
긴 메모리, HFREJ 트리거 커플링, 내장된 노이즈 필터 등이 저속 신호 (센서, 액츄에이터, 파워 공급, 기계)와 고속 신호가 혼합된 회로 내의 신호의 동작을 이해하도록 돕습니다.
WaveRunner Xi-A는 400 MHz - 2 GHz 대역에서 가장 완벽한 문제 해결 능력을 지닌 오실로스코프입니다. 뛰어난 성능, 큰 화면과 가벼운 사이즈, 다중 빠른 뷰 모드, SMART/시리얼 데이터 트리거, 스캔, 저속/고속 신호에 대한 WaveShape 분석 기능을 제공합니다. 어떤 측정 상황에서도 정확성, 성능, 기능을 모두 충족시켜 줍니다.
WaveRunner 204MXi-A
| Vertical System |
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div
|
|
2 GHz
|
Rise Time (typical)
|
|
180 ps
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz; 200 MHz
|
Input Impedance
|
|
1 MΩ || 20 pF or 50 Ω
|
Input Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
Input Connector
|
|
ProBus/BNC
|
Vertical Resolution
|
|
8 bits; up to 11 with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV/div?1 V/div fully variable; 1 MΩ: 2 mV?10 V/div fully variable
|
Offset Range
|
|
±400 mv@2?4.95 mv/div, ±1 V@5?99 mv/div, ±10 V @ 100 mv?1 V/div, ±100V @ 1.02?10 V/div; 1 M O: ±400 mv @ 2?4.95 mv/div, ±1 V @ 5?99 mv/div, ±10V @ 100 mv?1 V/div, ±100V @ 1.02?10 V/div
|
|
| Main Specifications |
Probes
|
|
One PP007 per channel standard; Optional passive and active probes available.
|
|
| Timebase System |
Roll Mode
|
|
User selectable at <= 500 ms/div and <= 100 kS/s
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real time: 200 ps/div?10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
|
Clock Accuracy
|
|
<= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5?40 °C)
|
Trigger and Interpolator Jitter
|
|
Jitter <=3 ps rms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div setting, 100 ms max., each channel
|
External Clock
|
|
DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s
|
Interleaved Sample Rate (2 Ch)
|
|
10 GS/s
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s
|
RIS Mode
|
|
User selectable from 100 ps/div to 10 ns/div
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second
|
Acquisition Memory Options
|
|
Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
|
Sequence Time Stamp Resolution
|
|
1 ns
|
Standard Memory
|
|
12.5M/25M 10,000
|
|
| Acquisition Processing |
Averaging
|
|
Summed and continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or (Sinx)/x
|
Time Resolution (min, Single-shot)
|
|
100 ps (10 GS/s)
|
|
| Triggering System |
Trigger Modes
|
|
Normal, Auto, Single, Stop
|
Sources
|
|
Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
|
Coupling
|
|
DC, AC (typically 7.5 Hz), HF Reject, LF Reject
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments, or 100 ns)
|
Post-trigger Delay
|
|
Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
|
Hold-off by Time
|
|
1 ns to 20 s or 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4)
|
|
2 div @ < 2 GHz 1 div @ < 200 MHz
|
External Trigger Input Range
|
|
EXT/10 ±4 V; EXT ±400 mV
|
Max. Trigger Frequency, SMART Trigger
|
|
2 GHz @ = 10 mV
|
Minimum Time Between Sequential Segments Sequential Segments
|
|
800 ns
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or Window) and level condition.
|
TV-Composite Video
|
|
Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input ? 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
|
|
| SMART Triggers with Exclusion Technology |
Glitch and Pulse Width
|
|
Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
|
Signal or Pattern Interval
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the normal width or period.
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat-panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
|
Waveform Representation
|
|
Sample dots joined or dots only in real-time mode
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
5 GS/s (10 GS/s for WaveRunner 62Xi-A, 64Xi-A, 104Xi-A, 204Xi-A in interleaved mode)
|
Waveforms
|
|
up to 8000 waveforms/second
|
Operation
|
|
Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
|
Vertical Find Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
|
|
| Probes |
Probe System: ProBus
|
|
Automatically detects and supports a variety of compatible probes.
|
Scale Factors
|
|
Automatically or manually selected, depending on probe used
|
|
| Setup and Waveform Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom/Math traces with 16 bits/data point
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
10/100/1000Base-T Ethernet interface (RJ-45 connector)
|
USB (Host)
|
|
5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
|
External Monitor Port
|
|
Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
|
| Auxiliary Input |
Signal Types
|
|
Selected from External Trigger or External Clock input on front panel
|
Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 5 kHz)
|
|
| Auxiliary Output |
Signal Types
|
|
Trigger Enabled, Trigger Output. Pass/Fail, or Off
|
Output Signal
|
|
TTL, ?3.3 V
|
Calibrator Signal
|
|
Output available on front panel connector provides a variety of signals for probe calibration and compensation.
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
Power Requirements
|
|
90?264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
-20 °C to +60 °C
|
Humidity (Operating)
|
|
Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
|
Humidity (Non-Operating)
|
|
5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Operating Up to 2,000 m
|
Altitude (Non-Operating)
|
|
Non-Operating 12,190 m
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
|
Net Weight
|
|
6.95 kg. (15.5 lbs.)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
|
|
WaveRunner 204Xi-A
| Vertical System |
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
2 GHz (Nominal, 10 mV-1 V/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical)
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz
|
Input Impedance
|
|
50 Ω+/-1.5% or 1 MΩ||20pF, 10 MΩ || 20 pF with supplied Probe
|
Input Coupling
|
|
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω: ±5 Vrms
1 MΩ: 250 V max. (DC + peak AC < 10 kHz)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV?1 V/div, fully variable; 1 MΩ: 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.0% of full scale (typical); ±1.5% of full scale, ≥10 mV/div (guaranteed)
|
Offset Range
|
|
50 Ω:
±400 mV @ 2?4.95 mV/div
±1V @ 5?99 mV/div
±10 V @ 100 mV/div -1 V/div
1 MΩ:
±400 mV @ 2?4.95 mV/div
±1V @ 5?99 mV/div
±10 V @ 100 mV/div -1 V/div
±100V @ 1.02V-10V/div
|
Offset Accuracy
|
|
±(1.5% of offset value +1% of full scale +1mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real-Time: 200 ps/div?10 s/div; RIS mode: 200 ps/div - 10 ns/div; Roll mode: up to 1000 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s
|
Clock Accuracy
|
|
≤ 5 ppm @ 25°C (typical) (≤ 10 ppm @ 5-40°C )
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Trigger and Interpolator Jitter
|
|
≤ 3 psrms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s on 4 Ch
10 GS/s on 2 Ch
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s, user selectable for repetitive signals (100 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
800 ns
|
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)
|
|
12.5 M / 25 M / 25M
(10,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
|
Coupling Mode
|
|
DC, AC (typically 7.5 Hz), HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time
|
|
From 1 ns up to 20 s or from 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 2 GHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 2 GHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Input Range
|
|
Ext (±0.4 V); Ext/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2 GHz @ ≥ 10 mV/div
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start o
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels. Maximum external monitor output resolution of 2048 x 1536 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Duo, 2.0 GHz (or better)
|
Processor Memory
|
|
1 GB standard
|
Operating System
|
|
Microsoft Windows® XP Pro for Embedded (32-bit)
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
External Monitor Port
|
|
15 pin D-Type SVGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with XGA resolution on second monitor.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 50/60 Hz; 115Vrms ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category: 300V CAT II
|
Max. Power Consumption
|
|
340 VA / 340 W (290 VA / 290 W for 62Xi-A)
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
10.25"H x 13.4"W x 6"D (260 x 340 x 152 mm)
|
Weight
|
|
16.0 lbs. (7.26 kg)
|
Shipping Weight
|
|
??? lbs. (??? kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveRunner 104MXi-A
| Vertical System |
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div
|
|
1 GHz
|
Rise Time (typical)
|
|
300 ps
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz; 200 MHz
|
Input Impedance
|
|
1 MΩ || 20 pF or 50 Ω
|
Input Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
Input Connector
|
|
ProBus/BNC
|
Vertical Resolution
|
|
8 bits; up to 11 with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV/div?1 V/div fully variable; 1 MΩ: 2 mV?10 V/div fully variable
|
Offset Range
|
|
±400 mv@2?4.95 mv/div, ±1 V@5?99 mv/div, ±10 V @ 100 mv?1 V/div, ±100V @ 1.02?10 V/div; 1 M O: ±400 mv @ 2?4.95 mv/div, ±1 V @ 5?99 mv/div, ±10V @ 100 mv?1 V/div, ±100V @ 1.02?10 V/div
|
|
| Main Specifications |
Probes
|
|
One PP007 per channel standard; Optional passive and active probes available.
|
|
| Timebase System |
Roll Mode
|
|
User selectable at <= 500 ms/div and <= 100 kS/s
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real time: 200 ps/div?10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
|
Clock Accuracy
|
|
<= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5?40 °C)
|
Trigger and Interpolator Jitter
|
|
Jitter <=3 ps rms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div setting, 100 ms max., each channel
|
External Clock
|
|
DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s
|
Interleaved Sample Rate (2 Ch)
|
|
10 GS/s
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s
|
RIS Mode
|
|
User selectable from 100 ps/div to 10 ns/div
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second
|
Acquisition Memory Options
|
|
Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
|
Sequence Time Stamp Resolution
|
|
1 ns
|
Standard Memory
|
|
12.5M/25M 10,000
|
|
| Acquisition Processing |
Averaging
|
|
Summed and continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or (Sinx)/x
|
Time Resolution (min, Single-shot)
|
|
100 ps (10 GS/s)
|
|
| Triggering System |
Trigger Modes
|
|
Normal, Auto, Single, Stop
|
Sources
|
|
Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
|
Coupling
|
|
DC, AC (typically 7.5 Hz), HF Reject, LF Reject
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments, or 100 ns)
|
Post-trigger Delay
|
|
Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
|
Hold-off by Time
|
|
1 ns to 20 s or 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4)
|
|
2 div @ < 1 GHz 1 div @ < 200 MHz
|
External Trigger Input Range
|
|
EXT/10 ±4 V; EXT ±400 mV
|
Max. Trigger Frequency, SMART Trigger
|
|
1 GHz @ = 10 mV
|
Minimum Time Between Sequential Segments Sequential Segments
|
|
800 ns
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or Window) and level condition.
|
TV-Composite Video
|
|
Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input ? 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
|
|
| SMART Triggers with Exclusion Technology |
Glitch and Pulse Width
|
|
Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
|
Signal or Pattern Interval
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the normal width or period.
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat-panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
|
Waveform Representation
|
|
Sample dots joined or dots only in real-time mode
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
5 GS/s (10 GS/s for WaveRunner 62Xi-A, 64Xi-A, 104Xi-A, 204Xi-A in interleaved mode)
|
Waveforms
|
|
up to 8000 waveforms/second
|
Operation
|
|
Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
|
Vertical Find Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
|
|
| Probes |
Probe System: ProBus
|
|
Automatically detects and supports a variety of compatible probes.
|
Scale Factors
|
|
Automatically or manually selected, depending on probe used
|
|
| Setup and Waveform Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom/Math traces with 16 bits/data point
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
10/100/1000Base-T Ethernet interface (RJ-45 connector)
|
USB (Host)
|
|
5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
|
External Monitor Port
|
|
Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
|
| Auxiliary Input |
Signal Types
|
|
Selected from External Trigger or External Clock input on front panel
|
Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 5 kHz)
|
|
| Auxiliary Output |
Signal Types
|
|
Trigger Enabled, Trigger Output. Pass/Fail, or Off
|
Output Signal
|
|
TTL, ?3.3 V
|
Calibrator Signal
|
|
Output available on front panel connector provides a variety of signals for probe calibration and compensation.
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
Power Requirements
|
|
90?264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
-20 °C to +60 °C
|
Humidity (Operating)
|
|
Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
|
Humidity (Non-Operating)
|
|
5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Operating Up to 2,000 m
|
Altitude (Non-Operating)
|
|
Non-Operating 12,190 m
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
|
Net Weight
|
|
6.95 kg. (15.5 lbs.)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
|
|
WaveRunner 104Xi-A
| Vertical System |
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
1 GHz (Nominal, 10 mV-1 V/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical)
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz
|
Input Impedance
|
|
50 Ω+/-1.5% or 1 MΩ||20pF, 10 MΩ || 20 pF with supplied Probe
|
Input Coupling
|
|
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω: ±5 Vrms
1 MΩ: 250 V max. (DC + peak AC < 10 kHz)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV?1 V/div, fully variable; 1 MΩ: 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.0% of full scale (typical); ±1.5% of full scale, ≥10 mV/div (guaranteed)
|
Offset Range
|
|
50 Ω:
±400 mV @ 2?4.95 mV/div
±1V @ 5?99 mV/div
±10 V @ 100 mV/div -1 V/div
1 MΩ:
±400 mV @ 2?4.95 mV/div
±1V @ 5?99 mV/div
±10 V @ 100 mV/div -1 V/div
±100V @ 1.02V-10V/div
|
Offset Accuracy
|
|
±(1.5% of offset value +1% of full scale +1mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real-Time: 200 ps/div?10 s/div; RIS mode: 200 ps/div - 10 ns/div; Roll mode: up to 1000 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s
|
Clock Accuracy
|
|
≤ 5 ppm @ 25°C (typical) (≤ 10 ppm @ 5-40°C )
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Trigger and Interpolator Jitter
|
|
≤ 3 psrms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s on 4 Ch
10 GS/s on 2 Ch
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s, user selectable for repetitive signals (100 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
800 ns
|
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)
|
|
12.5 M / 25 M / 25M
(10,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
|
Coupling Mode
|
|
DC, AC (typically 7.5 Hz), HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time
|
|
From 1 ns up to 20 s or from 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 1 GHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Input Range
|
|
Ext (±0.4 V); Ext/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
1 GHz @ ≥ 10 mV/div
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start o
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels. Maximum external monitor output resolution of 2048 x 1536 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Duo, 2.0 GHz (or better)
|
Processor Memory
|
|
1 GB standard
|
Operating System
|
|
Microsoft Windows® XP Pro for Embedded (32-bit)
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
External Monitor Port
|
|
15 pin D-Type SVGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with XGA resolution on second monitor.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 50/60 Hz; 115Vrms ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category: 300V CAT II
|
Max. Power Consumption
|
|
340 VA / 340 W (290 VA / 290 W for 62Xi-A)
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
10.25"H x 13.4"W x 6"D (260 x 340 x 152 mm)
|
Weight
|
|
16.0 lbs. (7.26 kg)
|
Shipping Weight
|
|
??? lbs. (??? kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveRunner 64MXI-A
| Vertical System |
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div
|
|
600 MHz
|
Rise Time (typical)
|
|
500 ps
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz; 200 MHz
|
Input Impedance
|
|
1 MΩ || 16 pF or 50 Ω
|
Input Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
Input Connector
|
|
ProBus/BNC
|
Vertical Resolution
|
|
8 bits; up to 11 with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV/div?1 V/div fully variable; 1 MΩ: 2 mV?10 V/div fully variable
|
Offset Range
|
|
50 Ω: ±1 V @ 2?98 mV/div, ±10 V @ 100 mV/div?1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2?98 mV/div, ±10 V @ 100 mV/div?1 V/div, ±100 V @ 1.02 V/div?10 V/div
|
|
| Main Specifications |
Probes
|
|
One PP008 per channel standard; Optional passive and active probes available.
|
|
| Timebase System |
Roll Mode
|
|
User selectable at <= 500 ms/div and <= 100 kS/s
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real time: 200 ps/div?10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
|
Clock Accuracy
|
|
<= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5?40 °C)
|
Trigger and Interpolator Jitter
|
|
Jitter <=3 ps rms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div setting, 100 ms max., each channel
|
External Clock
|
|
DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s
|
Interleaved Sample Rate (2 Ch)
|
|
10 GS/s
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s
|
RIS Mode
|
|
User selectable from 200 ps/div to 10 ns/div
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second
|
Acquisition Memory Options
|
|
Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
|
Sequence Time Stamp Resolution
|
|
1 ns
|
Standard Memory
|
|
12.5M/25M 10,000
|
|
| Acquisition Processing |
Averaging
|
|
Summed and continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or (Sinx)/x
|
Time Resolution (min, Single-shot)
|
|
100 ps (10 GS/s)
|
|
| Triggering System |
Trigger Modes
|
|
Normal, Auto, Single, Stop
|
Sources
|
|
Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
|
Coupling
|
|
DC, AC (typically 7.5 Hz), HF Reject, LF Reject
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments, or 100 ns)
|
Post-trigger Delay
|
|
Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
|
Hold-off by Time
|
|
1 ns to 20 s or 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4)
|
|
2 div @ < 600 MHz 1 div @ < 200 MHz
|
External Trigger Input Range
|
|
EXT/10 ±4 V; EXT ±400 mV
|
Max. Trigger Frequency, SMART Trigger
|
|
600 MHz @ = 10 mV
|
Minimum Time Between Sequential Segments Sequential Segments
|
|
800 ns
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or Window) and level condition.
|
TV-Composite Video
|
|
Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input ? 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
|
|
| SMART Triggers with Exclusion Technology |
Glitch and Pulse Width
|
|
Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
|
Signal or Pattern Interval
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the normal width or period.
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat-panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
|
Waveform Representation
|
|
Sample dots joined or dots only in real-time mode
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
5 GS/s (10 GS/s for WaveRunner 62Xi-A, 64Xi-A, 104Xi-A, 204Xi-A in interleaved mode)
|
Waveforms
|
|
up to 8000 waveforms/second
|
Operation
|
|
Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
|
Vertical Find Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
|
|
| Probes |
Probe System: ProBus
|
|
Automatically detects and supports a variety of compatible probes.
|
Scale Factors
|
|
Automatically or manually selected, depending on probe used
|
|
| Setup and Waveform Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom/Math traces with 16 bits/data point
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
10/100/1000Base-T Ethernet interface (RJ-45 connector)
|
USB (Host)
|
|
5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
|
External Monitor Port
|
|
Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
|
| Auxiliary Input |
Signal Types
|
|
Selected from External Trigger or External Clock input on front panel
|
Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
|
| Auxiliary Output |
Signal Types
|
|
Trigger Enabled, Trigger Output. Pass/Fail, or Off
|
Output Signal
|
|
TTL, ?3.3 V
|
Calibrator Signal
|
|
Output available on front panel connector provides a variety of signals for probe calibration and compensation.
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
Power Requirements
|
|
90?264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
-20 °C to +60 °C
|
Humidity (Operating)
|
|
Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
|
Humidity (Non-Operating)
|
|
5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Operating Up to 2,000 m
|
Altitude (Non-Operating)
|
|
Non-Operating 12,190 m
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
|
Net Weight
|
|
6.95 kg. (15.5 lbs.)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
|
|
WaveRunner 64Xi-A
| Vertical System |
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
600 MHz (Nominal, 10 mV-1 V/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical)
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz
|
Input Impedance
|
|
50 Ω+/-1% or 1 MΩ||16pF, 10 MΩ || 16 pF with supplied Probe
|
Input Coupling
|
|
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω: ±5 Vrms
1 MΩ: 400 V max. (DC + peak AC < 5 kHz)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV?1 V/div, fully variable; 1 MΩ: 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.0% of full scale (typical); ±1.5% of full scale, ≥10 mV/div (guaranteed)
|
Offset Range
|
|
50 Ω:
±1 V @ 2?98 mV/div
±10 V @ 100 mV/div -1 V/div
1 MΩ:
±1V @ 2?98 mV/div
±10V @ 100mV-1 V/div
±100V @ 1.02V-10V/div
|
Offset Accuracy
|
|
±(1.5% of offset value +0.5% of full scale +1mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real-Time: 200 ps/div?10 s/div; RIS mode: 200 ps/div - 10 ns/div; Roll mode: up to 1000 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s
|
Clock Accuracy
|
|
≤ 5 ppm @ 25°C (typical) (≤ 10 ppm @ 5-40°C )
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Trigger and Interpolator Jitter
|
|
≤ 3 psrms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s on 4 Ch
10 GS/s on 2 Ch
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s, user selectable for repetitive signals (200 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
800 ns
|
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)
|
|
12.5 M / 25 M / 25M
(10,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
|
Coupling Mode
|
|
DC, AC (typically 7.5 Hz), HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time
|
|
From 1 ns up to 20 s or from 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 600 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 600 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Input Range
|
|
Ext (±0.4 V); Ext/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
600 MHz @ ≥ 10 mV/div
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start o
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels. Maximum external monitor output resolution of 2048 x 1536 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Duo, 2.0 GHz (or better)
|
Processor Memory
|
|
1 GB standard
|
Operating System
|
|
Microsoft Windows® XP Pro for Embedded (32-bit)
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
External Monitor Port
|
|
15 pin D-Type SVGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with XGA resolution on second monitor.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 50/60 Hz; 115Vrms ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category: 300V CAT II
|
Max. Power Consumption
|
|
340 VA / 340 W (290 VA / 290 W for 62Xi-A)
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
10.25"H x 13.4"W x 6"D (260 x 340 x 152 mm)
|
Weight
|
|
16.0 lbs. (7.26 kg)
|
Shipping Weight
|
|
??? lbs. (??? kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveRunner 62Xi-A
| Vertical System |
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
600 MHz (Nominal, 10 mV-1 V/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical)
|
Input Channels
|
|
2
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz
|
Input Impedance
|
|
50 Ω+/-1% or 1 MΩ||16pF, 10 MΩ || 16 pF with supplied Probe
|
Input Coupling
|
|
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω: ±5 Vrms
1 MΩ: 400 V max. (DC + peak AC < 5 kHz)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV?1 V/div, fully variable; 1 MΩ: 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.0% of full scale (typical); ±1.5% of full scale, ≥10 mV/div (guaranteed)
|
Offset Range
|
|
50 Ω:
±1 V @ 2?98 mV/div
±10 V @ 100 mV/div -1 V/div
1 MΩ:
±1V @ 2?98 mV/div
±10V @ 100mV-1 V/div
±100V @ 1.02V-10V/div
|
Offset Accuracy
|
|
±(1.5% of offset value +0.5% of full scale +1mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real-Time: 200 ps/div?10 s/div; RIS mode: 200 ps/div - 10 ns/div; Roll mode: up to 1000 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s
|
Clock Accuracy
|
|
≤ 5 ppm @ 25°C (typical) (≤ 10 ppm @ 5-40°C )
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Trigger and Interpolator Jitter
|
|
≤ 3 psrms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s on 2Ch
10 GS/s on 1 Ch
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s, user selectable for repetitive signals (200 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
800 ns
|
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)
|
|
12.5 M / 25 M / 25M
(10,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
|
Coupling Mode
|
|
DC, AC (typically 7.5 Hz), HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time
|
|
From 1 ns up to 20 s or from 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 600 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 600 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Input Range
|
|
Ext (±0.4 V); Ext/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
600 MHz @ ≥ 10 mV/div
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start o
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels. Maximum external monitor output resolution of 2048 x 1536 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Duo, 2.0 GHz (or better)
|
Processor Memory
|
|
1 GB standard
|
Operating System
|
|
Microsoft Windows® XP Pro for Embedded (32-bit)
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
External Monitor Port
|
|
15 pin D-Type SVGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with XGA resolution on second monitor.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 50/60 Hz; 115Vrms ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category: 300V CAT II
|
Max. Power Consumption
|
|
340 VA / 340 W (290 VA / 290 W for 62Xi-A)
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
10.25"H x 13.4"W x 6"D (260 x 340 x 152 mm)
|
Weight
|
|
16.0 lbs. (7.26 kg)
|
Shipping Weight
|
|
??? lbs. (??? kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
WaveRunner 44MXi-A
| Vertical System |
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div
|
|
400 MHz
|
Rise Time (typical)
|
|
875 ps
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz; 200 MHz
|
Input Impedance
|
|
1 MΩ || 16 pF or 50 Ω
|
Input Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
Input Connector
|
|
ProBus/BNC
|
Vertical Resolution
|
|
8 bits; up to 11 with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV/div?1 V/div fully variable; 1 MΩ: 2 mV?10 V/div fully variable
|
Offset Range
|
|
50 Ω: ±1 V @ 2?98 mV/div, ±10 V @ 100 mV/div?1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2?98 mV/div, ±10 V @ 100 mV/div?1 V/div, ±100 V @ 1.02 V/div?10 V/div
|
|
| Main Specifications |
Probes
|
|
One PP008 per channel standard; Optional passive and active probes available.
|
|
| Timebase System |
Roll Mode
|
|
User selectable at <= 500 ms/div and <= 100 kS/s
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real time: 200 ps/div?10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
|
Clock Accuracy
|
|
<= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5?40 °C)
|
Trigger and Interpolator Jitter
|
|
Jitter <=3 ps rms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div setting, 100 ms max., each channel
|
External Clock
|
|
DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s
|
Interleaved Sample Rate (2 Ch)
|
|
5 GS/s
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s
|
RIS Mode
|
|
User selectable from 200 ps/div to 10 ns/div
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second
|
Acquisition Memory Options
|
|
Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
|
Sequence Time Stamp Resolution
|
|
1 ns
|
Standard Memory
|
|
12.5M/25M 10,000
|
|
| Acquisition Processing |
Averaging
|
|
Summed and continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or (Sinx)/x
|
Time Resolution (min, Single-shot)
|
|
200 ps (5 GS/s)
|
|
| Triggering System |
Trigger Modes
|
|
Normal, Auto, Single, Stop
|
Sources
|
|
Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
|
Coupling
|
|
DC, AC (typically 7.5 Hz), HF Reject, LF Reject
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments, or 100 ns)
|
Post-trigger Delay
|
|
Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
|
Hold-off by Time
|
|
1 ns to 20 s or 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4)
|
|
2 div @ < 400 MHz 1 div @ < 200 MHz
|
External Trigger Input Range
|
|
EXT/10 ±4 V; EXT ±400 mV
|
Max. Trigger Frequency, SMART Trigger
|
|
400 MHz @ = 10 mV
|
Minimum Time Between Sequential Segments Sequential Segments
|
|
800 ns
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or Window) and level condition.
|
TV-Composite Video
|
|
Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input ? 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
|
|
| SMART Triggers with Exclusion Technology |
Glitch and Pulse Width
|
|
Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
|
Signal or Pattern Interval
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the normal width or period.
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat-panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
|
Waveform Representation
|
|
Sample dots joined or dots only in real-time mode
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
|
|
| LeCroy WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1?100% adjustable via front panel control
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
5 GS/s
|
Waveforms
|
|
up to 8000 waveforms/second
|
Operation
|
|
Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
|
Vertical Find Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
|
|
| Probes |
Probe System: ProBus
|
|
Automatically detects and supports a variety of compatible probes.
|
Scale Factors
|
|
Automatically or manually selected, depending on probe used
|
|
| Setup and Waveform Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom/Math traces with 16 bits/data point
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
10/100/1000Base-T Ethernet interface (RJ-45 connector)
|
USB (Host)
|
|
5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
|
External Monitor Port
|
|
Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
|
| Auxiliary Input |
Signal Types
|
|
Selected from External Trigger or External Clock input on front panel
|
Coupling
|
|
50 Ω: DC, 1 MΩ: AC, DC, GND
|
Maximum Input Voltage
|
|
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
|
|
| Auxiliary Output |
Signal Types
|
|
Trigger Enabled, Trigger Output. Pass/Fail, or Off
|
Output Signal
|
|
TTL, ?3.3 V
|
Calibrator Signal
|
|
Output available on front panel connector provides a variety of signals for probe calibration and compensation.
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
Power Requirements
|
|
90?264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
-20 °C to +60 °C
|
Humidity (Operating)
|
|
Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
|
Humidity (Non-Operating)
|
|
5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Operating Up to 2,000 m
|
Altitude (Non-Operating)
|
|
Non-Operating 12,190 m
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
|
Net Weight
|
|
6.95 kg. (15.5 lbs.)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
|
|
WaveRunner 44Xi-A
| Vertical System |
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
400 MHz (Nominal, 10 mV-1 V/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
400 MHz (typical)
|
Input Channels
|
|
4
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz
|
Input Impedance
|
|
50 Ω+/-1% or 1 MΩ||16pF, 10 MΩ || 16 pF with supplied Probe
|
Input Coupling
|
|
1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω: ±5 Vrms
1 MΩ: 400 V max. (DC + peak AC < 5 kHz)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω: 2 mV?1 V/div, fully variable; 1 MΩ: 2 mV?10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.0% of full scale (typical); ±1.5% of full scale, ≥10 mV/div (guaranteed)
|
Offset Range
|
|
50 Ω:
±1 V @ 2?98 mV/div
±10 V @ 100 mV/div -1 V/div
1 MΩ:
±1V @ 2?98 mV/div
±10V @ 100mV-1 V/div
±100V @ 1.02V-10V/div
|
Offset Accuracy
|
|
±(1.5% of offset value +0.5% of full scale +1mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
Real-Time: 200 ps/div?10 s/div; RIS mode: 200 ps/div - 10 ns/div; Roll mode: up to 1000 s/div (roll mode is user selectable at ≥100 ms/div and ≤5 MS/s
|
Clock Accuracy
|
|
≤ 5 ppm @ 25°C (typical) (≤ 10 ppm @ 5-40°C )
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Trigger and Interpolator Jitter
|
|
≤ 3 psrms (typical)
|
Sample Rate and Delay Time Accuracy
|
|
Equal to Clock Accuracy
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
5 GS/s on 4 Ch
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s, user selectable for repetitive signals (200 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,250,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
800 ns
|
Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments)
|
|
12.5 M / 25 M / 25M
(10,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Ext, Ext/10, or line; slope and level unique to each source (except line trigger)
|
Coupling Mode
|
|
DC, AC (typically 7.5 Hz), HFRej, LFRej
|
Pre-trigger Delay
|
|
0?100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0?10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time
|
|
From 1 ns up to 20 s or from 1 to 1,000,000,000 events
|
Internal Trigger Range
|
|
±4.1 div from center (typical)
|
Trigger Sensitivity with Edge Trigger (Ch 1?4) ProBus Inputs
|
|
2 div @ < 400 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 400 MHz
1 div @ < 200 MHz
(DC, AC, and LFRej coupling)
|
External Trigger Input Range
|
|
Ext (±0.4 V); Ext/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
400 MHz @ ≥ 10 mV/div
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Holdoff between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input, or 2 channels and external input for 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start o
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive or negative glitches with widths selectable as low as 500ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Color Waveform Display |
Type
|
|
Color 10.4" flat panel TFT-LCD with high resolution touch screen
|
Resolution
|
|
SVGA; 800 x 600 pixels. Maximum external monitor output resolution of 2048 x 1536 pixels.
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Duo, 2.0 GHz (or better)
|
Processor Memory
|
|
1 GB standard
|
Operating System
|
|
Microsoft Windows® XP Pro for Embedded (32-bit)
|
Real Time Clock
|
|
Date and time displayed with waveform in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE ? 488.2
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
External Monitor Port
|
|
15 pin D-Type SVGA compatible DB-15 to support customer-supplied external monitor. Includes support for extended desktop operation with XGA resolution on second monitor.
|
Serial Port
|
|
DB-9 RS-232 port (not for remote oscilloscope control)
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Power Requirements |
Voltage
|
|
100?240 VAC ±10% at 50/60 Hz; 115Vrms ±10% at 380-420 Hz; Automatic AC Voltage Selection; Installation Category: 300V CAT II
|
Max. Power Consumption
|
|
340 VA / 340 W (290 VA / 290 W for 62Xi-A)
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C
|
Temperature (Non-Operating)
|
|
?20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C. Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.31 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Random Vibration (Non-Operating)
|
|
2.4 grms 5 Hz to 500 Hz, 15 minutes in each of three orthogonal axes
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
10.25"H x 13.4"W x 6"D (260 x 340 x 152 mm)
|
Weight
|
|
16.0 lbs. (7.26 kg)
|
Shipping Weight
|
|
??? lbs. (??? kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed; conforms to EN 61326, EN 61010-1, UL 61010-1 2nd edition, and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
시리얼 트리거 & 디코드
| | WRXi-1553 TD | MIL-STD-1553 Trigger and decode option for WaveRunner Xi | | WRXi-ARINC429bus DSymbolic | ARINC 429 Bus Symbolic Decode option for WaveRunner Xi/Xi-A | | WRXi-AudioBus TD | AudioBus trigger and decode for WaveRunner Xi | | WRXi-AudioBus TDG | AudioBus trigger, decode, and graph for WaveRunner Xi | | WRXi-DigRF3Gbus D | DigRF 3G Bus Decode option for WaveRunner Xi/Xi-A | | WRXi-DPHYbus D | D-PHY Bus Decode option for WaveRuner Xi/Xi-A | | WRXI-FLEXRAYBUS TD | FlexRay Trigger and Decode Option | | WRXi-FlexRaybus TDP | FlexRay Trigger, Decode and Physical Layer Test Option | | WRXI-I2CBUS TD | I2C Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes | | WRXI-LINBUS TD | LIN Bus Trigger & Decode Option for WaveRunner Xi Series Oscilloscopes | | WRXi-PROTObus MAG | Serial Debug Toolkit - Measure Analyze Graph for WaveRunner Xi/Xi-ACompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553 | | WRXi-ProtoSync | Decode Annotation and Protocol Analyzer Software Synchronization Option for WaveRunner Xi/Xi-ACompatible with USB2bus D, SATAbus D, SASbus D, FCbus D | | WRXi-SATAbus D | SATA Decode option for WaveRunner Xi/Xi-ASupports SATA Gen 1, 2, and 3. | | WRXI-SPIBUS TD | SPI Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes | | WRXi-UART-RS232BUS TD | UART and RS232 Bus Trigger and Decode Option for WaveRunner Xi Oscilloscopes | | WRXi-USB2bus D | USB 2.0 Bus Decode option for WaveRunner Xi/Xi-A | 시리얼 데이터 통신 테스트 소프트웨어
| | ET-PMT | Electrical Telecom Pulse Mask Software; | | QPHY-ENET | QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option | | QPHY-USB | QualiPHY Enabled USB 2.0 Compliance Software Option | | WRXi-SDM | Serial Data Mask Software Package for WaveRunner Xi Series | 범용 소프트웨어
| | WRXi-AORM | Advanced Options Record Measurement Package | | WRXi-EMC | EMC Pulse Parameter Package | | WRXi-SPECTRUM | Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series | | WRXi-STAT | Histogram and Statistical Analysis Pkg. | | WRXi-XDEV | Advanced Customization Software Package for WaveRunner Xi Series | | WRXi-XMAP | WRXi Master Analysis Package (XMATH+XDEV+JTA2) | | WRXi-XMATH | Advanced Math Software Package for WaveRunner Xi Series | | WRXi-XVAP | Value Analysis Software Package (includes XWAV and JTA2) for WaveRunner Xi Series | | WRXi-XWAV | WRXi Intermediate Math Package | | WRXi-XWEB | Processing Web Editor Software Package for Functions and Parameters for WaveRunner Xi Series | 디지털 필터링 소프트웨어
| | WRXi-DFP2 | Digital Filter Software Package for WaveRunner Xi Series | 데이터 스토리지 소프트웨어
| | WRXi-DDM2 | Disk Drive Measurement Software Package for WaveRunner Xi Series | 전력 분석 소프트웨어
| | WRXi-PMA2 | PowerMeasure Analysis Software Package for WaveRunner Xi Series | 지터 분석 소프트웨어
| | WRXi-JTA2 | Jitter and Timing Analysis Software Package for WaveRunner Xi Series | CAN Bus 테스팅
| | CANbus TD | CANbus TD Trigger and Decode Option | | CANbus TD 5LIC | CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes | | CANbus TDM | CAN Bus Trigger, Decode, and Measure/Graph option | | CANbus TDM-5LIC | CAN Bus Trigger, Decode, and Measure/Graph option with 1 Hardware Kit and 5 SW Licenses | | TC10011-OPTO | CAN B10011S Opto-isolated Truck and Bus Trigger Coupler | | TC1041-OPTO | CAN 1041 Opto-isolated High-speed Trigger Coupler | | TC1050-OPTO | CAN 1050 Opto-isolated High-speed Trigger Coupler | | TC1054-OPTO | CAN 1054 Opto-isolated Low-speed Trigger Coupler | | TC251-OPTO | CAN 251 Opto-isolated High-speed Trigger Coupler (one is included with CANbus TD) | | TC5790c-OPTO | CAN 5790c Opto-isolated Single-wire Trigger Coupler | | WRXi-CANbus TD | CAN Bus Trigger and Decode Option | | WRXi-CANbus TDM | CAN Bus Trigger Decode and Measure/Graph Option | 혼합 시그널 테스트 솔루션
| | MS-250 | 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500 | 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500-36 | 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option | | MSO-3M | 18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002) | | MSO-MICTOR | 36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD) | | PK400-1 | Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads | | PK400-2 | Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads | | PK400-3 | Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads | 통신용 테스트 픽스쳐
| | ENET-2ADA-BNCSMA | Adapter Set- 2 BNC/M to SMA/F | | ENET-2CAB-SMA018 | Cable Set- 2 SMA-SMA 18 inches | | ENET-2CAB-SMA036 | Cable Set- 2 SMA-SMA 36 inches | | TF-ENET-B | 10/100/1000BaseT Ethernet Test Fixture | | TF-ET | Electrical Telecom Adapters | | TF-USB-B | USB 2.0 Compliance Test Fixture | 차동 증폭기
| | DA101 | 10:1 1 MOhm Passive Attenuator | | DA1855A | 1 Ch, 100 MHz Differential Amplifier with Precision Voltage Source | | DA1855A-PR2 | 2 Ch, 100 MHz, Differential Amplifier with Precision Voltage Source | | DA1855A-PR2-RM | 2 Ch, DA1855A with Rackmount (must be ordered at time of purchase, no retrofit) | | DA1855A-RM | DA1855A with rackmount; | | DXC-5100 | 100:1 250 MHz 10 Mohm 2.75pf Differential Probe Pair; | | DXC100A | ÷100 or ÷10 Selectable, 250 MHz Passive Differential Probe Pair | | DXC200 | ÷1, 50 MHz, Passive Differential Probe Pair | 네트워크 옵션
| 기타 액세서리
| | WRXi-A-FP-CHNES-SI | WRXi-A Chinese (Simplified) Front Panel Overlay | | WRXi-A-FP-CHNES-TR | WRXi-A Chinese (Traditional) Front Panel Overlay | | WRXi-A-FP-FRENCH | WRXi-A French Front Panel Overlay | | WRXi-A-FP-GERMAN | WRXi-A German Front Panel Overlay | | WRXi-A-FP-ITALIAN | WRXi-A Italian Front Panel Overlay | | WRXi-A-FP-JAPANESE | WRXi-A Japanese Front Panel Overlay | | WRXi-A-FP-KOREAN | WRXi-A Korean Front Panel Overlay | | WRXi-A-FP-RUSSIAN | WRXi-A Russian Front Panel Overlay | | WRXi-A-FP-SPANISH | WRXi-A Spanish Front Panel Overlay | | WRXi-KYBD | WRXi Keyboard Accessory | | WRXi-MS-CLAMP | WRXi Clamp Mounting Stand | 랙마운트, 카트, 케이스 류
| | WRXi-HARDCASE | WRXi Hard Carrying Case | | WRXi-RACK | WRXi Rack Mount Accessory Kit | | WRXi-SOFTCASE | WRXi Soft Carrying Case |
차동 프로브
| | ADP300 | 1,400 V, 20 MHz High-Voltage Differential Probe | | ADP305 | 1,400 V, 100 MHz High-Voltage Differential Probe | | AP033 | 500 MHz Differential Probe | | AP034 | 1 GHz, Active Differential Probe (÷1, ÷10, ÷20) | | D300A-AT | WaveLink D300 3 GHz/4.8Vp-p Differential Amplifier Module with Adjustable Tips. 5.8 mVrms (typical)probe + scope noise.Includes Manual and Quick Reference Guide. | | D310 | WaveLink D310 3.5 GHz/2.5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D310-PT | WaveLink D310 3.5 GHz/2.5Vp-p & +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx10-PTAdjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'ywith Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins | | D320 | WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential AmplifierSmall Tip Module with Solder-in, Quick Connect, and Square Pin Lead Sets, plus accessories. | | D320-PT | WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module w/Dx20-PTAdjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Ass'ywith Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins | | WL-Pbus | WaveLink ProBus Platform/Cable Assembly Kit for 4 GHz WaveLink Probes. Includes ProBus Probe Body(attaches Differential Amplifier Small Tip Module and Tip/Lead to LeCroy Oscilloscope ProBus Input),FreeHand Probe Holder, Platform Clamp, Probe Characterization Fixture, Qty. 2 Cable Clamps, Plastic | | WR104XI-A-C5 | 5 Year Annual Traceable Calibration during Coverage period | | WR104XI-A-T5 | 5 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period | | WR104XI-A-W5 | 5 Year Warranty (including Standard warranty) | | WR104XI-A-W8 | 8 Year Warranty (including Standard warranty) | | WR204XI-A-C5 | 5 Year Annual Traceable Calibration during Coverage period | | WR204XI-A-T5 | 5 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period | | WR204XI-A-W5 | 5 Year Warranty (including Standard warranty) | | WR204XI-A-W8 | 8 Year Warranty (including Standard warranty) | | WR44XI-A-C5 | 5 Year Annual Traceable Calibration during Coverage period | | WR44XI-A-T5 | 5 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period | | WR44XI-A-W5 | 5 Year Warranty (including Standard warranty) | | WR44XI-A-W8 | 8 Year Warranty (including Standard warranty) | | WR62XI-A-C5 | 5 Year Annual Traceable Calibration during Coverage period | | WR62XI-A-T5 | 5 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period | | WR62XI-A-W5 | 5 Year Warranty (including Standard warranty) | | WR62XI-A-W8 | 8 Year Warranty (including Standard warranty) | | WR64XI-A-C5 | 5 Year Annual Traceable Calibration during Coverage period | | WR64XI-A-T5 | 5 Year Warranty (Including STD warranty) with Annual Traceable Calibration during Coverage period | | WR64XI-A-W5 | 5 Year Warranty (including Standard warranty) | | WR64XI-A-W8 | 8 Year Warranty (including Standard warranty) | 능동 프로브
| | HFP1000 | 1 GHz, 0.7pF Active Voltage Probe(10:1), Small Form Factor | | HFP1500 | 1.5 GHz, 0.7pF Active Voltage Probe(10:1), Small Form Factor | | HFP2500 | 2.5 GHz, 0.7pF Active Voltage Probe(10:1), Small Form Factor | 전류 프로브
| | AP015 | 30 A, 50 MHz Current Probe - AC/DC, 30 A rms, 50 A Peak Pulse | | CP030 | 30A, 50MHz Current Probe | | CP031 | 30A, 100MHz Current Probe | | CP150 | 150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse | | CP500 | 500 A, 2 MHz Current Probe - AC/DC, 500 A rms, 700 A Peak Pulse | | DCS015 | Deskew Calibration Source for AP015 | 고전압 프로브
| | PPE1.2KV | 10:1/100:1 200/300 MHz 50 MOhms High-Voltage Probe 600V/1.2kV Max. Volt. DC | | PPE20KV | 1000:1 100 MHz 100 MOhms High-Voltage Probe 20kV Max. Volt. DC + 40kVPeak AC | | PPE2KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE4KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE5KV | 100:1 400 MHz 50 MOhms High-Voltage Probe | | PPE6KV | 1000:1 400 MHz 5 MOhms/50 MOhms High-Voltage Probe | ZS 시리즈 고 임피던스 능동 프로브
| | ZS1000 | 1 GHz, .9 pF, 1 MOhm Active Voltage Probe | | ZS1000-QUADPAK | Set of 4 ZS1000, 1 GHz High Impedance Active Probes | | ZS1500 | 1.5 GHz, .9 pF, 1 MOhm Active Voltage Probe | | ZS1500-QUADPAK | Set of 4 ZS1500, 1.5 GHz High Impedance Active Probes | 프로브 파트 & 키트
| | Dx10-HiTEMP | WaveLink Temperature Extension cables for Dx10.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set | | Dx10-SI-HiTEMP | Replacement Solder tip leadset for use with D610/D410 and temperature extension cables | | Dx20-HiTEMP | WaveLink Temperature Extension cables for Dx20.Includes 1 set of matched 30" high temperature cables, 1 solder tip lead set | | Dx20-SI-HiTEMP | Replacement Solder tip leadset for use with D620/D320 and temperature extension cables | | Dxx0-Cable-HiTemp | Replacement 30" matched cable set for use with HiTemp Solder tip leadset |
|
|
|
