Power Measurement Solutions

With LeCroy PowerMeasure Systems, you can analyze power devices' performance while they are operating in circuit. The PowerMeasure System combines the required current and differential voltage measuring capability with unequalled DSO triggering, long record capture, and waveform math to make these difficult measurements as simple as the push of a very few buttons.

Current, voltage, instantaneous power and energy dissipation measurements.

Clock Certification & Test Module (CCTM)

CCTM is specified by Rambus Inc. as the first approved tool for compliance testing of DRCG (Direct Rambus® Clock Generator) jitter. All jitter measurements as required by Rambus are automatically configured and easily performed through the CCTM wizard.

Telecom Mask Test Packages

MT series Mask Testing options for optical and electrical communication signals are available with WavePro scopes. Mask Testing compares a trace against a mask template to check if it falls inside or outside the mask boundaries. Several actions may be initiated if the trace fails the test, including “stop”, “output a pulse”, and “datalog”.

With the exclusive Finder Function, pulses, patterns or even random bit streams are easily isolated. 
MT packages take control of the WavePro scope, displaying only relevant test menus.

Mask Testing and extinction ratio measurements of OC-12 optical signal.

JitterPro (JPRO)

This analysis package provides a comprehensive set of precise timing measurements for clock, clock-to-data, and datastream analysis. JPRO includes all the capabilities of JTA plus the JitterWizard that turns a WavePro DSO into a dedicated jitter and timing analyzer. Get incredible ease of operation, combined with unparalleled analysis capabilities.

An example of a PlayStation-2 DVD. Channel 1 represents the data from the DVD, while the pulse/width modulation is shown on Trace B. Trace D is a histogram of B. The pulse widths are well defined within narrow bands, with no interference between adjacent ones.

PolyMask

PolyMask is a powerful, general-purpose testing application that lets you view and test against complex masks. PolyMask locates and clearly depicts signal failures. In pass-fail testing, failures are highlighted with colored circles. Creating masks is greatly simplified with the MaskMaker utility, a simple program that runs on any PC with Windows. Masks can be used in either 8x10 or X-Y display mode (useful for applications such as power measurement.)

An Ethernet 100 Base-T mask created with the MaskMaker utility.