WavePro 900 Series
WavePro Oscilloscopes
 Specifications

 


Math Tools (Standard)
Simultaneously perform up to four math (signal) processing functions; traces can be chained together to perform math-on-math. 
absolute value
average (summed to 1000 sweeps)
difference
differentiate 
enhanced resolution (to 11 bits vertical)
envelope
exp (base e) 
exp (base 10) 
FFT of 50 kpoint waveforms 
floor
histogram of 200 events
identity 
integrate
log (base e)		 log (base 10) 
negate
parameter trackview 
product
ratio
reciprocal (invert) 
resample (deskew)
rescale (with units)
roof 
sin x/x 
square 
square root 
sum
trend (datalog)

Measure Tools (Standard)

Dashboard displays up to 26 parameters; Display any five parameters together with their average, high, low, and standard deviations.

Automated Measure Tools:
amplitude
area
base
cycle std. deviation
cycle mean
cycle rms
cycles
delay
fall 90-10%
fall 80-20%
frequency
maximum
mean		 minimum
+overshoot
–overshoot
peak-to-peak
period
rise 10-90%
rise 20-80%
rms
std. deviation
top
width
xamn
xamx
delay fall @ level; % and volts
time @ level; % and volts first point
time @ level from trigger last point
time from clock to data + (setup time) median
time from clock to data - (hold time) number of points
cycle median phase
data rise @ level; % and volts
duration time @ minimum (min)
duty cycle time @ maximum (max)

Pass/Fail 
Test any five parameters against selectable thresholds. Limit testing is performed using masks created on the scope or PC. Set up a pass or fail condition to initiate actions such as hard-copy output, saving waveform to memory, GPIB SRQ, or pulse out.

Cursor Measurements
Type  Symbol  From  To
Relative time  First point on 
waveform 		 Any other point on waveform
Relative voltage 
 		Select voltage level  Any other voltage level
Absolute time  Time and voltage relative to Ground and trigger
Absolute voltage  Voltage  Ground

WAVEANALYZER PRO (WAVAPRO)

This package provides the most comprehensive set of signal analysis tools for expanding the capability of WavePro oscilloscopes. It includes: Histograms with 18 histogram parameters on 2 billion events Summed averaging to one million sweeps Continuous weighted averaging FFT capability expands the basic FFT to include: FFT power averaging FFT power density – real and imaginary FFT on all acquisition points up to 25 Mpts Jitter and Timing Analysis (JTA) Digital Filter Package (DFP)
Other Application Solutions Available
(JPRO)   Jitter Pro 
(CCTM)   Clock Certification and Test Module—for Rambus clock generator
(JTA)  Jitter and Timing Analysis  
(WAVA)   WaveAnalyzer Package 
(PMSK)   Polymask Mask Testing 
(AORM)   Advanced Optical Recording Measurements
(DDM)   Disk Drive Measurements 
(PRML)   PRML Analysis 
(PMA)  PowerMeasure Analysis 

Software Utilities 

ScopeExplorer
Easy-to-use utility that provides a simple but powerful way to control your scope remotely over RS-232-C, GPIB, or Ethernet. 
ActiveDSO
Active X controls for flexible Windows applications programming with remote control.
MaskMaker
Create your tolerance mask offline with this graphic tool.
DSO Filter
Specify a set of filter coefficients offline and load them into the scope.

 

Copyright © LeCroy Corporation 2008