| |
|
DDA 8 Zi Series
Based on the WaveMaster 8 Zi Series models, the DDA 8 Zi Series Disk Drive Analyzers are available in 16 and 25 GHz models and come equipped with 20 Mpts/ch acquisition memory. Dedicated disk drive measurements, trigger and zooming for failure analysis, and serial data measurement capability with a Disk Drive Analyzer user interface are also standard to address high capacity disk drive designs. Operate in either DDA or SDA mode to analyze the serial data links or the physical media behavior on a hard drive. All DDAs also include all capability included in SDAs (with the exception of the 3.125 Gb/s serial trigger).
- 16 or 25 GHz
- Zoom on multi-zoom on sectors
- One button access to read channel emulation and disk drive triggers
- Head equalization, channel Emulation, and SAM histograms
- Segmented memory for sector by sector parametric analysis
- 8 dual integrated inputs of 50 Ω and 1 MΩ
A Total Solution for Disk Drive Analysis
Maximum Performance
LeCroy Disk Drive Analyzers (DDA) assist data storage design engineers by integrating tools that improve the time to market of new products and accelerate understanding and failure analysis on existing drives. LeCroy continues that tradition with the DDA 8 Zi Series equipped with its powerful Disk Drive Analysis toolset. Capture, view, and analyze the wave shape of high-speed, complex drive signals with speed and integrity.
Data Storage applications are memory intensive as capturing multiple sectors or a complete track of data can be important in troubleshooting a design or characterizing media. The X-Stream II architecture enables fast and accurate measurements and analysis of disk drive signals. Memory can be extended to 256 Mpts/Ch using Option VL. DDA 8 Zi's offer the convenience of selectable 50 Ω or 1 MΩ inputs. The standard 20 Mpts
of waveform memory and 40 GS/s capture on four channels, means multiple drive sectors can be acquired at once.
Long Memory and Flexibility in Finding Problems
Acquire a head signal and then QuickZoom it from the front panel. The DDA copies and expands the drive signal automatically. Simply scroll horizontally and vertically to
examine any sector. Multiple zooms let you view up to eight separate areas of the head signal; each zoom comes in a distinct color. Disk drive parameters let you characterize the pulse width variation or signal-to-noise ratio across a region. Failure Analysis engineers can store and recall golden waveforms and panel setups to compare problem drives with the known good drives. Analog-to-digital converters running at speeds of 40 GS/s ensure the right sensitivity to measure today’s high-speed read channels. In every DDA, you can run your customer-developed scripts to view the captured signal with the filters matched to your channel and media. Custom user scripts can be created in MATLAB, Visual Basic, Excel or other formats.
Exceptional Trigger and Sequence Performance
The DDA’s disk triggers allow you to set up a series of events in the
signal that then cause a trigger. For example, qualify the signal on
the index signal and then capture all the sectors of information on the track. As memory is increased in the DDA, more sectors can be captured, with up to 50 picosecond/
sample time resolution. Up to 15,000 sectors of data can be gathered with the DDA 8 Zi analyzers.
Cascade Triggering
Cascade Triggering allows up to two events to qualify a third event (arm on A event, then qualify on B event, then trigger on C event) for precise trigger control. For instance, this could be used to Arm when the Index signal goes high, qualify when the Read Gate signal goes high, then trigger on a Head signal.
Natural Graphical Interface
One press on the DDA menu takes you directly to the Disk Drive Analyzer features. The familiar controls on the front panel, coupled with a natural, context-sensitive graphical user-interface, react quickly to your commands. Functionality is exactly where you
expect it to be.
The DDA 8 Zi provides one button access to all the tools needed to accurately debug and analyze disk drive operation.
The DDA 8 Zi Features:
- 28 Custom Parameters
- Specific Drive Triggers
- Sector
- Servo Gate
- Read Gate Trigger
- Advanced Drive Analysis Tools
- Head Filter Equalizer Emulation
- Channel Emulation
- SAM Histograms
- Plot of SAM Values
- Analog Compare
DDA 816Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
28 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
21 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
M - Memory Option
|
|
64 M / 64 M
(Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)
(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP5
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
DDA 825Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
25 GHz (≥ 10 mV/div)
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
19 ps (@ full BW)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
14 ps
|
Input Channels
|
|
4 (@16 GHz), 2 (@ full BW)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV–500 mV/div
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
±500 mV @ 2–74 mV/div
±4 V @ >76 mV/div -500 mV/div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @
2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥ 20 GHz Mode: Real-Time Mode, 5 ps/div - 12.5µs/div (upper time/div is a function of memory available at 80 GS/s. For VL memory, upper time/div is 640 µs/div)
For < 20 GHz mode: 5 ps/div–320 s/div (Real-time mode: 5 ps/div–20 s/div; RIS mode: 5 ps/div–10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
80 GS/s at full bandwidth on 2 channels
40 GS/s on 4 Ch
|
Random Interleaved Sampling (RIS)
|
|
Not Applicable
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
M - Memory Option
|
|
64 M / 64 M (128 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
L - Memory Option
|
|
128 M / 128 M (256 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode) (5000)
|
VL – Memory Option
|
|
256 M / 256 M(512 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in Digital Bandwidth Interleave mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP7
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
Memory Options
| | DDA8Zi-L-128 | 128 Mpts/Ch Memory Option for DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | | DDA8Zi-M-64 | 64 Mpts/Ch Memory Option for DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | | DDA8Zi-S-32 | 32 Mpts/Ch Memory Option for DDA 8 Zi, Includes 4 GB RAM standard | | DDA8Zi-VL-256 | 256 Mpts/Ch Memory Option for DDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | Sampling Rate Options
| | WM8Zi-2X80GS | 80 GS/s on 2 Ch Sampling Rate Option for WaveMaster 8 Zi (not available for 820Zi, 825Zi or 830Zi).Includes two separate external interleaving devices with storage case. | Serial Trigger and Decode
| | WM8Zi-FlexRayBus TD | FlexRay Trigger and Decode Option | | WM8Zi-FlexRayBus TDP | FlexRay Bus Trigger, Decode, and Physical Layer Test Option | | WM8Zi-HSPT | 50 Mb/s to 3.125 Gb/s High-speed Serial Pattern Trigger Option for 4–30 GHz Oscilloscopes and Disk Drive Analyzers (Standard on SDA 8 Zi) | | WM8Zi-I2Cbus TD | I2C Bus Trigger and Decode Option | | WM8Zi-LINbus TD | LIN Trigger and Decode Option | | WM8Zi-SPIbus TD | SPI Bus Trigger and Decode Option | | WM8Zi-UART-RS232bus TD | UART and RS-232 Trigger and Decode Option | Serial Data Communications Testing Software
| | QPHY-DisplayPort | QualiPHY Enabled DisplayPort Software Option | | QPHY-ENET | QualiPHY Ethernet Application Software | | QPHY-HDMI | QualiPHY Enabled HDMI Software Option (TF-HDMI-3.3V-QUADPAK required;WavePro 760Zi requires SDA II option) | | QPHY-PCIe | PCIe Gen1 Compliance and Development Software | | QPHY-SATA | QualiPHY Enabled SATA Software Option | | QPHY-USB | USB Application Software Package | | QPHY-USB3 | QualiPHY USB 3.0 Compliance Test Script (*WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **WaveMaster/SDA/DDA 8 Zi class oscilloscopes require the Eye Dr II software option) | | QPHY-UWB | WiMedia UWB Transmitter Measurement Software Option | | SDA-HDMI | HDMI Compliance Test Software Package for 4 GHz or higher SDA/WaveMaster Family of Digital Storage Oscilloscopes | | SDA-SAS | SAS Compliance Software Package | General Purpose Software
| | WM8Zi-AORM | Advanced Optical Recording Measurement Package | | WM8Zi-CBL-DE-EMBED | Cable De-Embed Option (Standard on SDA 8 Zi and DDA 8 Zi) | | WM8Zi-EMC | EMC Pulse Parameter Software Package | | WM8Zi-EYEDRII | Eye Doctor II Advanced Signal Integrity Tools | | WM8Zi-SPECTRUM | Spectrum Analyzer and Advanced FFT Option | | WM8Zi-XDEV | Advanced Customization Software Package | Digital Filtering Software
| | WM8Zi-DFP2 | Digital Filter Software Package | Power Analysis Software
| | WM8Zi-PMA2 | Power Measure Analysis Software Package | CAN Bus Testing
| | WM8Zi-CANbus TD | CANbus TD Trigger and Decode Option | | WM8Zi-CANbus TDM | CANbus TDM Trigger, Decode and Measure/Graph Option | Mixed Signal Test Solutions
| | MS-250 | 250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500 | 500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option | | MS-500-36 | 250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option | | MSO-DLS-18 | Digital Lead Set, D0-D17 | | MSO-DLS-36 | Digital Lead Set, D18-D35 | | MSO-GND-EXTEND | MSO Ground Extenders | | MSO-GND-LEAD | MSO Flying Ground Lead | | MSO-LBUS | LeCroy Bus Cable | | MSO-MICTOR | Mictor Cable, D0-D35 | | MSO-MICTOR-SHROUD | Shroud for Mictor Connector, Kit of 3 | Communications Testing Fixtures
| | TF-DSQ | Probe Deskew and Calibration Fixture | | TF-ENET-B | 10/100/1000Base-T Compliance Test Fixture | | TF-ET | Telecom Adaptor Kit 100Ω, 120Ω, 75Ω | | TF-SATA-C | SATA Compliance Test Fixture (*WavePro 7 Zi and WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **20M memory required) | | TF-SATA-C-Kit | SATA Compliance Test Kit (*WavePro 7 Zi and WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **20M memory required) | | TF-USB-B | USB 2.0 Testing Compliance Test Fixture | Differential Amplifiers
| | DA18000 | 18 GHz Differential Amplifier (SDA 18000 only) | | DA1855A | DA1855A, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters | | DA1855A-PR2 | 2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters | | DA1855A-PR2-RM | Rack mountable version of the DA1855A-PR2 | | DA1855A-RM | DA1855A with rackmount | Storage Devices
| | GPIB-2 | GPIB Option for LeCroy oscilloscope. Half-height card with custom connector. | | LSIB-1 | High speed PCIe Gen1 x4 digitizer output for LeCroy oscilloscope. Half-height card with custom connector | | WM8Zi-120GB-RHD-02 | Additional 120 GB Hard Drive. Includes Windows Vista OS, LeCroy Oscilloscope Software and Critical Scope Operational File Duplicates | | WM8Zi-200GB-HD | Upgrade from Standard Size Hard Drive to 200 GB Hard Drive | | WM8Zi-200GB-RHD-02 | Additional 200 GB Hard Drive. Includes Windows Vista OS, LeCroy Oscilloscope Software and Critical Scope Operational File Duplicates | | WM8Zi-4-UPG-8GBRAM | Upgrade from 4 GB to 8 GB CPU RAM | Miscellaneous Accessories
| | FRONT-COVER-1 | Replacement Protective Front Cover for WavePro Zi Series | | KYBD-1 | Keyboard | | LSIB-CABLE-3M | PCI Express x 4 3-meter cable with x4 cable connectors included | | LSIB-CABLE-7M | PCI Express x 4 7-meter cable with x4 cable connectors include | | LSIB-HOSTBOARD | PCI Express x4 Host Interface Board for desktop PC | | LSIB-HOSTCARD | PCI Express x1 Express Card Host Interface for laptop Express Card slot | | ZI-EXTDISP-15 | Top-mounted, Fully Integrated 15.3" WXGA with Touch Screen Display, Including all Cabling and Software | Rackmounts, Carts and Cases
| | OC1021 | OC1021 scope cart is sturdy and mobile | | OC1024 | OC1024 scope cart is sturdy and mobile | | WM8Zi-HARDCASE | Hard Carrying Case | | WM8Zi-RACKMOUNT | Rackmount Accessory for Converting aWM8Zi Series Oscilloscope to an 8U Rack-mounted Package | | WM8Zi-SOFTCASE | Soft Carrying Case | Warranty & Calibration
| | WM816Zi-EW | 1 Year Extended Warranty | | WM816Zi-EW2 | 2 Year Extended Warranty | | WM816Zi-T5 | Five Year Warranty & NIST Cal | | WM816Zi-W5 | Five Year Warranty | | WM825Zi-EW | 1 Year Extended Warranty | | WM825Zi-EW2 | 2 Year Extended Warranty | | WM825Zi-T5 | Five Year Warranty & NIST Cal | | WM825Zi-W5 | Five Year Warranty | | WM8Zi-C5 | WM8Zi Five Year NIST Cal Pkg. | | WM8Zi-C5/MIL | WM8Zi Five Year MIL Cal Pkg. | | WM8Zi-CC | WM8Zi NIST Cal for Service | | WM8Zi-CCM | WM8Zi MIL Cal for Service | | WM8Zi-CCMIL | MIL Calibration Certification for WaveMaster, SDA, and DDA 8 Zi | | WM8ZI-HBW-C5 | Five Year NIST Cal Pkg | | WM8ZI-HBW-C5/MIL | Five Year MIL Cal Pkg | | WM8ZI-HBW-CC | NIST Traceable Calibration | | WM8ZI-HBW-CCM | MIL STD Calibration | | WM8Zi-SM-E | WM8Zi Series Service manual |
Differential Probes
| | ADP300 | High-Voltage Active Differential Probe | | ADP305 | High-Voltage Differential Probes From LeCroy | | AP031 | 15 MHz Differential Probe | | AP033 | 500 MHz Active Differential Probe | | AP034 | 1 GHz Active Differential Probe | | D11000PS | 11 GHz Differential Probe System | | D11000PS-CCNIST | NIST Traceable Calibration with Test Data | | D11000SI | Replacement solder-in interconnect lead | | D11000SMA | Replacement SMA Interconnect Cables | | D11000SMP | SMP Interconnect Leads | | D13000PS | 13 GHz Differential Probe System | | D13000PS-CCNIST | NIST Traceable Calibration with Test Data | | D13000SI | Replacement Solder-In Interconnect Lead | | D13000SMA | Replacement SMA Interconnect Cables | | D13000SMP | Replacement SMP Interconnect Cables | | D300A-AT | WaveLink 4 GHz Differential Probe with Adjustable Tip Module | | D310 | WaveLink 3.5 GHz Differential probe module 2.5V | | D320 | WaveLink 3.5 GHz Differential probe module 5V | | D350ST | WaveLink 4 GHz, 5 V Differential with Small Tip Module | | D500PT | WaveLink 6 GHz Differential Positioner Mounted Tip Module | | D600A-AT | WaveLink 7.5 GHz Differential Probe with Adjustable Tip Module | | D600ST | WaveLink 7 GHz Differential Probe with Small Tip Module (includes D6000ST-SI, D600ST-QC, D600ST-SP) | | D610 | WaveLink 6 GHz Differential probe module 2.5V | | D620 | WaveLink 6 GHz Differential probe module 5V | | DA18000AC | 18 GHz Type “K” Differential Probe, AC Coupled | | Dx10-PT | Replacement Dx10-PT Tip with Qty. 4 Pogo Pin Tips and Qty. 2 Sockets | | Dx20-PT | Replacement Dx20-PT Tip with Qty. 4 Pogo Pin Tips and Qty. 2 Sockets | | WL-Pbus | WaveLink ProBus probe body = 3.5 GHz | | WL-PLink | WaveLink ProLink probe body >3.5 GHz | | WL300 | WaveLink ProBus Probe Body | | WL600 | WaveLink ProLink Probe Body | Active Voltage Probes
| | HFP2500 | 2.5 GHz Active Voltage Probe | Current Probes
| | AP015 | 30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse | | CP030 | 30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse | | CP031 | 30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse | | CP150 | 150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak Pulse | | CP500 | 500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak | High Voltage Probes
| | PPE1.2KV | 10:1/100:1 200/300 MHz 5M Ohm/100M Ohm | | PPE20KV | 1000:1 100 MHz 100M Ohm High-Voltage Probe | | PPE2KV | 100:1 400 MHz 100M Ohm High Voltage Probe | | PPE4KV | 100:1 400 MHz 100M Ohm High-Voltage Probe | | PPE5KV | 100:1 400 MHz 100M Ohm High-Voltage Probe | | PPE6KV | 1000:1 400 MHz 5M Ohm High-Voltage Probe | Passive Probes
| | PP007-WR-1 | Passive Probe, 500 MHz, 2.5mm tip | | PP011-1 | PP011 Passive Probe | ZS Series High Impedance Active Probes
| | ZS1000 | 1 GHz, 1 MΩ, 0.9 pF Active Probe | | ZS1000-QUADPAK | Set of 4 ZS1000 Active Probes | | ZS1500 | 1.5 GHz, 1 MΩ, 0.9 pF Active Probe | | ZS1500-QUADPAK | Set of 4 ZS1500 Active Probes | Optical to Electrical Converters
| | OE425 | Short wavelength O/E Converter (500-870 nm) | | OE455 | Long wavelength O/E Converter (950-1630 nm) | | OE525 | Short wavelength O/E Converter (500-870 nm) | | OE555 | Long wavelength O/E converter | Probe Adapters
| | LPA-K-A | ProLink to K/2.92 mm Adapter | | LPA-K-KIT-A | Kit of ProLink to K/2.92 mm Adapters | | LPA-SMA-A | Pro-Link to SMA Adapter, new style | | LPA-SMA-KIT-A | Kit of Pro-Link to SMA Adapter, new style | Probe Parts and Kits
| | Dx10-SI | Replacement Solder tip lead set for D310/D610 | | Dx10-SP | Replacement Square Pin lead set for D310/D610 | | Dx20-QC | Replacement Quick Connect lead set for D320/D620 | | Dx20-SI | Replacement Solder tip lead set for D320/D620 | | Dx20-SP | Replacement Square Pin lead set for D320/D620 |
|
|
|
