| |
|
SDA 8 Zi Series
SDA 8 Zi Serial Data Analyzers are based on the WaveMaster 8 Zi Series oscilloscope and are equipped with double the standard memory to capture more unit intervals in the eye diagram. They include an enhanced high-speed serial pattern trigger that operates on up to 80 bit patterns and at speeds up to 3.125 Gb/s. Whether debugging eye pattern or other compliance test failures, the SDA 8 Zi Series rapidly isolates the source of the problem in your design.
- Display Eye Pattern, TIE, Bathtub Curve and Jitter Histogram on the screen at the same time
- Create Eye Patterns utilizing the full memory for maximum statistical significance
- 100 times faster Eye Diagram creation
- Gain insight with IsoBER and Mask Violation Locator tools
A Total Solution for Serial Data Analysis
Unleash the power of serial data analysis for understanding and characterizing your design, proving compliance and understanding why a device or host fails compliance. The Quad Summary View of the SDA II software always shows the eye, TIE, bathtub curve and jitter histogram. No other Serial Data Analyzer lets you see the simultaneous interaction and real-time changes in all four views. The X-Stream II Architecture provides fast updates and the fastest eye interpretation. Combined with up to 512 Mpts record lengths and more complete jitter decomposition tools, SDA II provides
the fastest and most complete understanding of why serial data fails a compliance test.
Advanced jitter decomposition methodologies and tools provide more information about root cause. Eye Doctor II Advanced Signal Integrity Tools provide more measurement precision through the use of de-embedding and emulation of cables, fixtures, emphasis, serial data channels, and receivers. All jitter decomposition analysis functions can be zoomed and time correlated to specific serial data or other events, making root cause determination faster and easier.
Automated Compliance Testing
The QualiPHY compliance test suite provides step-by-step instructions for testing compliance on a wide array of serial data standards. The process is simplified with fast, automated test operations, illustrated instructions, connection diagrams, and stop on fail feature. Complete test reporting is also provided.
SDA II – Advanced Tools to Isolate and Analyze
Flow Diagram User Interface
Eye and jitter analysis in the SDA 8 Zi begins with a simple, interactive flow diagram intuitively guides you through the setup of Eye Measurements, Jitter Measurements, or both at the same time.
Serial Trigger
The SDA 8 Zi Series comes standard with the 80-bit Pattern Trigger installed. The serial trigger operates up to 3.125 Gb/s and supports both 8b10b and NRZ signals, and also includes a recovered clock and data output on the front of the oscilloscope.
8b/10b Decoding
The LeCroy’s 8b/10b serial decode option has powerful search capabilities enabling captured waveform searches for user-defined sequences of symbols. Multi-lane analysis decodes up to four simultaneously captured lanes. User selection is provided for PCIe, PCIe 2.0, SAS, SATA, XAUI, generic 8b10b or user-defined 8b10b protocols.
Equalization
The equalization feature removes the effects created in systems that utilize equalization. Users can view the eye of a waveform as seen by a receiver that employs equalization.
ISI Plot
The ISI plot shows data-dependent jitter contributions to the eye pattern for the second-to-last bit of a bit length, set from 3 to 10. This plot measures data dependent jitter (DDj) eliminating the need for a repeating bit pattern.
Jitter Spectrum
- The jitter spectrum plot allows viewing of any periodic jitter
- Peak annotation displays the frequencies directly on the spectrum
- The LeCroy spectrum plot allows viewing of DDj removal for maximum comprehension
Jitter Trend
- Time domain view of jitter shows transient jitter events that can be missed by viewing the histogram alone
- The jitter trend clearly shows any non-stationary jitter behavior
Histogram & Bathtub
- Measured jitter histogram clearly displays unusual jitter distributions like bi-modal or non-Gaussian tails. The raw data view shows possibly lost jitter behavior just by viewing the jitter decomposition
- This unprocessed display gives a high degree of confidence in the accuracy of the jitter decomposition and bathtub curve
Cable De-embedding
Even expensive, high-performance cabling can have an adverse effect on measurements and decrease margin from a design. Cable losses and slow rise times can lead to intersymbol interference (ISI). The cable de-embedding feature removes these adverse effects providing more accurate measurements.
SDA 804Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
4 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
94 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
71 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
M - Memory Option
|
|
64 M / 64 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 4 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP1
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 806Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
6 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
63 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
47 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
(Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 6 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP2
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 808Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
8 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
50 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
37 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
(Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 8 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP3
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 813Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
13 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
33 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
25 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
(Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 13 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP4
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 816Zi
| Vertical System |
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
28 ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
21 ps
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable; 1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @ 2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
5 ps/div–320 s/div (Real-Time Mode: 5 ps/div - 20 s/div; RIS mode: 5 ps/div - 10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
40 GS/s on 4 Ch (80 GS/s on 2 Ch using optional WM8Zi-2X80GS External Interleaving Device)
|
Random Interleaved Sampling (RIS)
|
|
200 GS/s for repetitive signals (20 ps/div to 10 ns/div)
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
(Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)
(15,000)
|
M - Memory Option
|
|
64 M / 64 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
L - Memory Option
|
|
128 M / 128 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
VL – Memory Option
|
|
256 M / 256 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of optional WM8Zi-2X80GS External Interleaving Device)(15,000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s with optional WM8Zi-2X80GS external interleaving device)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP5
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
975 W / 975 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
51.5 lbs. (23.4 kg)
|
Shipping Weight
|
|
70.0 lbs. (31.8 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 820Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
20 GHz (≥ 10 mV/div)
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
21 Ps
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
16 ps
|
Input Channels
|
|
4 (@16 GHz), 2 (@ full BW)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV–500 mV/div
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
±500 mV @ 2–74 mV/div
±4 V @ >76 mV/div -500 mV/div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @
2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥ 20 GHz Mode: Real-Time Mode, 5 ps/div - 12.5µs/div (upper time/div is a function of memory available at 80 GS/s. For VL memory, upper time/div is 640 µs/div)
For < 20 GHz mode: 5 ps/div–320 s/div (Real-time mode: 5 ps/div–20 s/div; RIS mode: 5 ps/div–10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
80 GS/s at full bandwidth on 2 channels
40 GS/s on 4 Ch
|
Random Interleaved Sampling (RIS)
|
|
Not Applicable
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
M - Memory Option
|
|
64 M / 64 M (128 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
L - Memory Option
|
|
128 M / 128 M (256 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode) (5000)
|
VL – Memory Option
|
|
256 M / 256 M(512 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in Digital Bandwidth Interleave mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP6
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 825Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
25 GHz (≥ 10 mV/div)
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
19 ps (@ full BW)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
14 ps
|
Input Channels
|
|
4 (@16 GHz), 2 (@ full BW)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV–500 mV/div
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
±500 mV @ 2–74 mV/div
±4 V @ >76 mV/div -500 mV/div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @
2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥ 20 GHz Mode: Real-Time Mode, 5 ps/div - 12.5µs/div (upper time/div is a function of memory available at 80 GS/s. For VL memory, upper time/div is 640 µs/div)
For < 20 GHz mode: 5 ps/div–320 s/div (Real-time mode: 5 ps/div–20 s/div; RIS mode: 5 ps/div–10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
80 GS/s at full bandwidth on 2 channels
40 GS/s on 4 Ch
|
Random Interleaved Sampling (RIS)
|
|
Not Applicable
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
M - Memory Option
|
|
64 M / 64 M (128 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
L - Memory Option
|
|
128 M / 128 M (256 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode) (5000)
|
VL – Memory Option
|
|
256 M / 256 M(512 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in Digital Bandwidth Interleave mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP7
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
SDA 830Zi
| Vertical System |
Analog (2.92 mm Input) Bandwidth @ 50 Ω (-3 dB)
|
|
30 GHz (≥ 10 mV/div)
|
Analog (ProLink Input) Bandwidth @ 50 Ω (-3 dB)
|
|
16 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 50 Ω (-3 dB)
|
|
3.5 GHz
(≥ 10 mV/div)
|
Analog (ProBus Input) Bandwidth @ 1 MΩ (-3 dB)
|
|
500 MHz (typical, ≥2 mV/div)
|
Rise Time (typical, 10-90%, 50 Ω)
|
|
17 ps (@ full BW)
|
Rise Time (typical, 20-80%, 50 Ω)
|
|
13 ps
|
Input Channels
|
|
4 (@16 GHz), 2 (@ full BW)
|
Bandwidth Limiters
|
|
20 MHz, 200 MHz, 1 GHz, 4 GHz, 6 GHz, 8 GHz, 13 GHz
|
Input Impedance
|
|
50 Ω+/-2% or 1 MΩ||16pF, 10 MΩ || 11 pF with supplied Probe
|
Input Coupling
|
|
2.92 mm Inputs: 50 Ω: DC, GND
ProLink Inputs - 50 Ω: DC, GND
ProBus Inputs - 1 MΩ: AC, DC, GND; 50 Ω: DC, GND
|
Maximum Input Voltage
|
|
2.92 mm Inputs: ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProLink): ±2 Vmax@=100mV/div, 5.5Vrms@>100mV/div
50 Ω (ProBus): ±5 Vmax, 3.5 Vrms
1 MΩ (ProBus): 250 V max. (peak AC: < 10 kHz + DC)
|
Vertical Resolution
|
|
8 bits; up to 11 bits with enhanced resolution (ERES)
|
Sensitivity
|
|
50 Ω (2.92 mm): 10 mV–500 mV/div
50 Ω (ProLink): 2 mV–1 V/div, fully variable (2-9.9 mV/div via zoom)
50 Ω (ProBus): 2 mV–1 V/div, fully variable
1 MΩ (ProBus): 2 mV–10 V/div, fully variable
|
DC Gain Accuracy
|
|
±1.5% of full scale
|
Offset Range
|
|
50 Ω (2.92 mm):
±500 mV @ 2–74 mV/div
±4 V @ >76 mV/div -500 mV/div
50 Ω (ProLink):
±500 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
50 Ω (ProBus):
±750 mV @ 2–100 mV/div
±4 V @ > 102 mV/div -1 V/div
1 MΩ:
±1V @
2–140 mV/div
±10V @ 142mV-1.40V/div
±100V @ 1.42V-10V/div
|
Offset Accuracy
|
|
±(1.5% of full scale + 1.5% of offset value + 2 mV)
|
|
| Horizontal System |
Timebases
|
|
Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
|
Time/Division Range
|
|
For ≥ 20 GHz Mode: Real-Time Mode, 5 ps/div - 12.5µs/div (upper time/div is a function of memory available at 80 GS/s. For VL memory, upper time/div is 640 µs/div)
For < 20 GHz mode: 5 ps/div–320 s/div (Real-time mode: 5 ps/div–20 s/div; RIS mode: 5 ps/div–10 ns/div; Roll mode: up to 320 s/div)
|
Clock Accuracy
|
|
< 1 ppm + (aging of 0.5ppm/yr from last calibration)
|
Time Interval Accuracy
|
|
< 0.06 / SR + (clock accuracy* Reading) (rms)
|
Jitter Noise Floor
|
|
<500 fs (typical)
|
Trigger and Interpolator Jitter
|
|
2 ps rms (typical)
<0.1 ps rms (typical, software assisted)
|
Channel-Channel Deskew Range
|
|
±9 x time/div. setting, 100 ms max., each channel
|
External Timebase Reference (Input)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Timebase Reference (Output)
|
|
10 MHz; 50 Ω impedance, applied at the rear input
|
External Sample Clock
|
|
Not Available
|
|
| Acquisition System |
Single-Shot Sample Rate/Ch
|
|
80 GS/s at full bandwidth on 2 channels
40 GS/s on 4 Ch
|
Random Interleaved Sampling (RIS)
|
|
Not Applicable
|
Maximum Trigger Rate
|
|
1,000,000 waveforms/second (in Sequence Mode, up to 4 channels)
|
Intersegment Time
|
|
1 µs
|
Standard Memory (4 Ch / 2 Ch) (Number of Segments)
|
|
20 M / 20 M (Memory and Sample Rate can be doubled in 2 Ch mode with use of WM8Zi-2X80GS External Interleaving Device)(5000)
|
S - Memory Option
|
|
32 M / 32 M
64 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
M - Memory Option
|
|
64 M / 64 M (128 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
L - Memory Option
|
|
128 M / 128 M (256 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode) (5000)
|
VL – Memory Option
|
|
256 M / 256 M(512 Mpts in 2 Ch mode when operated in Digital Bandwidth Interleave mode)(5000)
|
|
| Acquisition Processing |
Averaging
|
|
Summed averaging to 1 million sweeps; continuous averaging to 1 million sweeps
|
Enhanced Resolution (ERES)
|
|
From 8.5 to 11 bits vertical resolution
|
Envelope (Extrema)
|
|
Envelope, floor, or roof for up to 1 million sweeps
|
Interpolation
|
|
Linear or Sin x/x
|
|
| Triggering System |
Modes
|
|
Normal, Auto, Single, and Stop
|
Sources
|
|
Any input channel, Aux, Aux/10, or line; slope and level unique to each source (except line trigger)
|
Coupling
|
|
DC, AC, HFRej, LFRej
|
Pre-trigger Delay
|
|
0–100% of memory size (adjustable in 1% increments of 100 ns)
|
Post-trigger Delay
|
|
0–10,000 divisions in real time mode, limited at slower time/div settings or in roll mode
|
Hold-off by Time or Events
|
|
From 2 ns up to 20 s or from 1 to 99,999,999 events
|
Internal Trigger Range
|
|
±4.1 div from center
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProBus Inputs
|
|
2 div @ < 3.5 GHz
1.5 div @ < 1.75 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
Trigger Sensitivity with Edge Trigger (Ch 1–4) ProLink Inputs
|
|
2 div @ < 15 GHz
1.5 div @ < 3 GHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling, = 10 mV/div, 50 Ω )
|
External Trigger Sensitivity, (Edge Trigger)
|
|
2 div @ < 1 GHz
1.5 div @ < 500 MHz
1.0 div @ < 200 MHz
(for DC, AC, LFRej coupling)
|
External Trigger Input Range
|
|
Aux (±0.4 V); Aux/10 (±4 V)
|
Max. Trigger Frequency, SMART Trigger
|
|
2.0 GHz @ = 10 mV/div
(minimum triggerable width 200 ps)
|
|
| Basic Triggers |
Edge
|
|
Triggers when signal meets slope (positive, negative, or either) and level condition.
|
Window
|
|
Triggers when signal exits a window defined by adjustable thresholds
|
TV-Composite Video
|
|
Triggers NTSC or PAL with selectable line and field; HDTV (720p, 1080i, 1080p) with selectable frame rate (50 or 60 Hz) and Line; or CUSTOM with selectable Fields (1-8), Lines (up to 2000), Frame Rates (25, 30, 50, or 60 Hz), Interlacing (1:1, 2:1, 4:1, 8:1), or Synch Pulse Slope (Positive or Negative).
|
|
| SMART Triggers |
State or Edge Qualified
|
|
Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
|
Qualified First
|
|
In Sequence acquisition mode, triggers repeatably on event B only if a defined pattern, state, or edge (event A) is satisfied in the first segment of the acquisition. Delay between sources is selectable by time or events.
|
Dropout
|
|
Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
|
Pattern
|
|
Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pattern.
|
|
| SMART Triggers with Exclusion Technology |
Glitch
|
|
Triggers on positive or negative glitches with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Width (Signal or Pattern)
|
|
Triggers on positive, negative, or both widths with widths selectable as low as 200ps (depending on oscilloscope bandwidth) to 20 s, or on intermittent faults.
|
Interval (Signal or Pattern)
|
|
Triggers on intervals selectable between 1 ns and 20 s.
|
Timeout (State/Edge Qualified)
|
|
Triggers on any source if a given state (or transition edge) has occurred on another source.
Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
|
Runt
|
|
Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 ns.
|
Slew Rate
|
|
Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 ns.
|
Exclusion Triggering
|
|
Trigger on intermittent faults by specifying the expected behavior and triggering when that condition is not met
|
|
| Cascade (Sequence) Triggering |
Capability
|
|
Arm on "A" event, then Trigger on "B" event. Or Arm on "A" event, then Qualify on "B" event, and Trigger on "C" event. Or Arm on “A” event, then Qualify on “B” then “C” event, and Trigger on “D” event
|
Types
|
|
A or B event: Edge, Glitch, Width, Window, Dropout, Interval, Runt, Slew Rate, or Pattern (analog) C or D event: Edge or Pattern
|
Holdoff
|
|
Delay between A and B, B and C, C and D, are all selectable by time or number of events
|
Reset
|
|
Reset between A and B, B and C, C and D, are all selectable in time
|
|
| High Speed Serial Protocol Triggering |
Data Rates
|
|
100 Mb/s–2.7 Gb/s, 3.0, 3.125 Gb/s (standard with SDA 8 Zi models)
|
Pattern Length
|
|
80-bits, NRZ or 8b/10b
|
Clock and Data Outputs
|
|
400mVp-p (typical) AC coupled
|
Clock Recovery Jitter
|
|
2 ps rms + 0.3% Unit Interval rms for PRBS data patterns with 50% transition density (typical)
|
Hardware Clock Recovery Loop BW
|
|
PLL Loop BW = Fbaud/5500, 100 Mb/s to 1.25 Gb/s (typical)
|
|
| Low Speed Serial Protocol Triggering (Optional) |
Optionally available
|
|
I2C, SPI (SPI, SSPI, SIOP), UART-RS232, CAN, LIN, FlexRay
|
|
| Color Waveform Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
Number of traces
|
|
Display a maximum of 8 traces. Simultaneously display channel, zoom, memory and math traces.
|
Grid Styles
|
|
Auto, Single, Dual, Quad, Octal, X-Y, Single+X-Y, Dual+X-Y
|
Waveform Representation
|
|
Sample dots joined, or sample dots only
|
|
| Internal Waveform Memory |
Internal Waveform Memory
|
|
4 active waveform memory traces (M1-M4) store 16 bit/point full length waveforms. Waveforms can be stored to any number of files limited only by the data storage media capacity.
|
|
| WaveStream™ Fast Viewing Mode |
Intensity
|
|
256 Intensity Levels, 1–100% adjustable via front panel control
|
Types
|
|
Select analog or color-graded
|
Number of Channels
|
|
up to 4 simultaneously
|
Max Sampling Rate
|
|
40 GS/s (80 GS/s when operated in Digital Bandwidth Interleave mode)
|
Persistence Aging
|
|
Select from 500 ms to Infinity
|
Waveforms/second (continuous)
|
|
up to 2500 Waveforms/second
|
|
| Automatic Setup |
Auto Setup
|
|
Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals
|
Find Vertical Scale
|
|
Automatically sets the vertical sensitivity and offset for the selected channel to display a waveform with the maximum dynamic range
|
|
| Probes |
Probes
|
|
Qty. (4) ÷10 Passive Probes
|
Probing System
|
|
Probus and ProLink. Automatically detects and supports a variety of compatible probes
|
Scale Factors
|
|
Automatically or manually selected depending on probe used
|
Calibration Output
|
|
1kHz square wave, 1Vp-p (typical), output to probe hook
|
|
| Integrated Second Display |
Type
|
|
Color 15.3" flat panel TFT-Active Matrix LCD with high resolution touch screen
|
Resolution
|
|
WXGA; 1280 x 768 pixels
|
|
| Analog Persistence Display |
Analog and Color-Graded Persistence
|
|
Variable saturation levels; stores each trace’s persistence data in memory
|
Trace Selection
|
|
Activate persistence on all or any combination of traces
|
Sweep Display Modes
|
|
All accumulated, or all accumulated with last trace highlighted
|
Persistence Types
|
|
Select analog, color, or three-dimensional
|
Persistence Aging
|
|
Select from 500 ms to infinity
|
|
| High Speed Digitizer Output (Option) |
Type
|
|
LeCroy LSIB
|
Transfer Rate
|
|
Up to 325 MB/s (Typical)
|
Output Protocol
|
|
PCI Express, Gen 1 (4 lanes utilized for data transfer)
|
Control Protocol
|
|
TCP/IP
|
Command Set
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
|
| Processor/CPU |
Type
|
|
Intel® CoreTM 2 Quad, 2.5 GHz (or better)
|
Processor Memory
|
|
4 GB standard, up to 8 GB optional
(8 GB standard with "M-64", "L-128", or "VL-256" memory)
|
Operating System
|
|
Microsoft Windows® Vista Business Edition (64-bit) with SP8
|
Real Time Clock
|
|
Date and time displayed with waveform an in hardcopy files. SNTP support to synchronize to precision internal clocks.
|
|
| Zoom Expansion Traces |
Zoom Expansion Traces
|
|
Display up to 4 Zoom and 8 Math/Zoom traces
|
|
| Setup Storage |
Front Panel and Instrument Status
|
|
Store to the internal hard drive or to a USB-connected peripheral device.
|
|
| Interface |
Remote Control
|
|
Via Windows Automation, or via LeCroy Remote Command Set
|
Network Communication Standard
|
|
VXI-11 or VICP, LXI Class C (v1.2) Compliant
|
GPIB Port (optional)
|
|
Supports IEEE – 488.2
|
LSIB Port (optional)
|
|
Supports PCIe Gen1 x4 protocol with LeCroy supplied API
|
USB Device Port (optional)
|
|
Type-B
|
Ethernet Port
|
|
Supports 10/100/1000BaseT Ethernet interface (RJ45 port)
|
USB Ports
|
|
minimum 6 total (incl. 3 front panel) USB 2.0 ports support Windows compatible devices
|
External Monitor Port
|
|
15-pin D-Type WXGA compatible to support customer-supplied external monitor. DVI connector to support LeCroy Zi-EXTDISP-15 additional touch screen display accessory. Includes support for extended desktop operation with optional LeCroy or other second monitor.
|
Peripheral Bus
|
|
LeCroy LBUS standard
|
|
| Auxiliary Input |
Signal Types
|
|
Select External Trigger or External Clock Input on the front panel
|
Coupling
|
|
50 Ω: DC; 1 MΩ: AC, DC, GND
|
Max. Input Voltage
|
|
50 Ω: 5 Vrms; 1 MΩ: 250 V (Peak AC < 10 kHz + DC)
|
|
| Auxiliary Output |
Signal Types
|
|
Select from calibrator, control signals or Off
|
Calibrator Signal
|
|
500 Hz–5 MHz square wave or DC level; 0.0 to 500 mV into 50 Ω (0–1 V into 1 MO)
|
Control Signals
|
|
Trigger enabled, trigger out, pass/fail status
|
|
| General |
Auto Calibration
|
|
Ensures specified DC and timing accuracy is maintained for 1 year minimum.
|
|
| Power Requirements |
Voltage
|
|
100–240 VAC ±10% at 45-66 Hz; 100-120 VAC ±10% at 380-420 Hz; Automatic AC Voltage Selection
|
Max. Power Consumption
|
|
1025 W / 1025 VA
|
|
| Environmental and Safety |
Temperature (Operating)
|
|
+5 °C to +40 °C including CD-RW/DVD-ROM drive
|
Temperature (Non-Operating)
|
|
–20 °C to +60 °C
|
Humidity (Operating)
|
|
5% to 80% relative humidity (non-condensing) up to +31 °C.
Upper limit derates to 50% relative humidity (non-condensing) at +40 °C.
|
Humidity (Non-Operating)
|
|
5% to 95% relative humidity (non-condensing) as tested per MIL-PRF-28800F
|
Altitude (Operating)
|
|
Up to 10,000 ft. (3048 m) at or below +25 °C
|
Altitude (Non-Operating)
|
|
Up to 40,000 ft. (12,192 m)
|
Random Vibration (Operating)
|
|
0.5 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Random Vibration (Non-Operating)
|
|
2.0 grms overall level, 5 Hz to 500 Hz, 10 minutes in each of three orthogonal axes, 30 minutes total
|
Functional Shock
|
|
20 g peak, half sine, 11 ms pulse, 3 shocks (positive and negative) in each of three orthogonal axes, 18 shocks total
|
|
| Physical Dimensions |
Dimensions (HWD)
|
|
14" H x 18.4" W x 15.3" D (355 x 467 x 390 mm) height excludes feet
|
Weight
|
|
58 lbs. (26.4 kg)
|
Shipping Weight
|
|
76.0 lbs. (34.5 kg)
|
|
| Certifications |
Certifications
|
|
CE Compliant, UL and cUL listed conforms to EN 61326-1, EN 61010-1, UL 61010-1 2nd edition,and CSA C22.2 No. 61010-1-04
|
|
| Warranty and Service |
Warranty and Service
|
|
3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, and calibration services.
|
|
Memory Options
| | SDA8Zi-L-128 | 128 Mpts/Ch Memory Option for SDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | | SDA8Zi-M-64 | 64 Mpts/Ch Memory Option for SDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | | SDA8Zi-S-32 | 32 Mpts/Ch Memory Option for SDA 8 Zi, Includes 4 GB RAM standard | | SDA8Zi-VL-256 | 256 Mpts/Ch Memory Option for SDA 8 Zi. Includes an additional 4 GB of RAM (8 GB total) | Sampling Rate Options
| | WM8Zi-2X80GS | 80 GS/s on 2 Ch Sampling Rate Option for WaveMaster 8 Zi (not available for 820Zi, 825Zi or 830Zi).Includes two separate external interleaving devices with storage case. | Serial Trigger and Decode
| | WM8Zi-FlexRayBus TD | FlexRay Trigger and Decode Option | | WM8Zi-FlexRayBus TDP | FlexRay Bus Trigger, Decode, and Physical Layer Test Option | | WM8Zi-I2Cbus TD | I2C Bus Trigger and Decode Option | | WM8Zi-LINbus TD | LIN Trigger and Decode Option | | WM8Zi-SPIbus TD | SPI Bus Trigger and Decode Option | | WM8Zi-UART-RS232bus TD | UART and RS-232 Trigger and Decode Option | Serial Data Communications Testing Software
| | QPHY-DisplayPort | QualiPHY Enabled DisplayPort Software Option | | QPHY-ENET | QualiPHY Ethernet Application Software | | QPHY-HDMI | QualiPHY Enabled HDMI Software Option (TF-HDMI-3.3V-QUADPAK required;WavePro 760Zi requires SDA II option) | | QPHY-PCIe | PCIe Gen1 Compliance and Development Software | | QPHY-SATA | QualiPHY Enabled SATA Software Option | | QPHY-USB | USB Application Software Package | | QPHY-USB3 | QualiPHY USB 3.0 Compliance Test Script (*WaveMaster 8 Zi class oscilloscopes require the SDA II software option; **WaveMaster/SDA/DDA 8 Zi class oscilloscopes require the Eye Dr II software option) | | QPHY-UWB | WiMedia UWB Transmitter Measurement Software Option | | SDA-HDMI | HDMI Compliance Test Software Package for 4 GHz or higher SDA/WaveMaster Family of Digital Storage Oscilloscopes | | SDA-SAS | SAS Compliance Software Package | General Purpose Software
| | WM8Zi-AORM | Advanced Optical Recording Measurement Package | | WM8Zi-DDA | Disk Drive Analyzer Software Package | | WM8Zi-EMC | EMC Pulse Parameter Software Package | | WM8Zi-EYEDRII | Eye Doctor II Advanced Signal Integrity Tools | | WM8Zi-SPECTRUM | Spectrum Analyzer and Advanced FFT Option | | WM8Zi-XDEV | Advanced Customization Software Package | Digital Filtering Software
| | WM8Zi-DFP2 | Digital Filter Software Package | Data Storage Software
| | WM8Zi-DDM2 | Disk Drive Measurements Software Package (Standard on DDA 8 Zi) | Power Analysis Software
| | WM8Zi-PMA2 | Power Measure Analysis Software Package | |
|
