Waverunner-2
Specifications ( Discontinued )

 

Vertical System 

LT374 / M / L

LT372 

LT264 /M  LT262
Input Channels  4 2 4 2  
Analog Bandwidth @ 50 Ohms (-3 dB) 500 MHz 500 MHz 350 MHz 350 MHz
Hardware Bandwidth Limits 20 MHz, 200 MHz 
Input Impedance 50 Ohms ± 1%; 10 MOhms / 12 pF typical (using PP006 probe)
Input Coupling 1 MOhms : AC, DC, GND; 50 Ohms : DC, GND
Maximum Input 50 Ohms : 5 Vrms; 1 MOhms : 400 Vmax (peak AC <=5 kHz + DC)
Vertical Resolution 8 bits; up to 11 bits with enhanced resolution (ERES) 
Sensitivity (50 ohm or 1 M ohm) 2 mV - 10V/div fully variable 
DC Gain Accuracy ± (1.5% + 0.5% of full scale)
Offset Accuracy (50 ohm or 1 M ohm) ± (1.5% + 0.5% of full scale + 1 mV)
Offset Range 2 mV – 99 mV/div: ± 1 V
100 mV – 999 mV/div: ± 10 V
1V – 10 V/div: ±100 V
Isolation Channel-to-Channel > 250:1 at same V/div settings
Timebase System
Timebases

Main and up to four independent zoom traces simultaneously

Ranges 500 ps/div – 1000 s/div 1 ns/div – 1000 s/div
Clock Accuracy <=10 ppm
Interpolator Resolution 5 ps
External Clock Frequency 500 MHz maximum, 50 Ohms, or 1 MOhms impedance 
Roll Mode – Operating Range time/div 500 ms – 1000 s/div or sample rate < 100 kS/s max
External Timebase Clock 500 MHz maximum external sample clock input on front panel EXT BNC
Acquisition System
Single-Shot Sample Rate
1 Channel Max.  4 GS/s  4 GS/s   1 GS/s  1 GS/s
2 Channels Max.  4 GS/s  2 GS/s  1 GS/s  1 GS/s
3 – 4 Channels Max.  2 GS/s  NA 1 GS/s  NA
Maximum Acquisition Points/Ch 
1 Channel Max.  500k / 2M / 8M  500k  100k / 1 M  100k
2 Channel Max.   500k / 2M / 8M  250k  100k / 1 M  100k
3 - 4 Channel Max.  250k / 1M / 4M  NA 100k / 1 M  NA
Acquisition Modes
Random Interleaved Sampling (RIS)  50 GS/s for repetitive signals: 200 ps/div – 1 µs/div
Single-Shot  For transient and repetitive signals: 1 ns/div – 1000 s/div
Sequence 
LT262 / 264  2 – 400 segments
LT372 / 374  2 – 1000 segments
Memory Option M or L  2 – 400 segments
Intersegment Time  50 µsec max.
Acquisition Processing 
Averaging 
 		Summed averaging to 10 sweeps; continuous averaging with weighting range from 1:1 to 1:1023 (standard).
Summoned averaging up to 10 6  sweeps (optional with WAVA)
Enhanced Resolution (ERES)  From 8.5 to 11 bits vertical resolution
Envelope (Extrema)  Envelope, floor, roof for up to 10 6 sweeps
Triggering System 
Modes  Normal, Auto, Single, and Stop
Sources 
 		Any input channel, external, Ext/10 or line; slope, level, and coupling unique to each source (except line trigger)
Inactive channels usable as trigger inputs.
Slope  Positive, Negative, Window
Coupling modes  DC, AC, HF, HFREJ, LFREJ

AC Cutoff Frequency 

7.5 Hz Typical

HFREJ, LFREJ 

50 kHz typical
Pre-trigger delay  0 – 100% of horizontal time scale
Post-trigger delay  0 – 10000 divisions
Hold-off by time or events 
 		Up to 20s or from 1 to 99 999 999 events
Internal trigger range  ±5 div
Max trigger frequency  500 MHz (350 MHz on LT264, LT262)
External trigger input range  ±0.5 ( ±2.5 V with Ext/5 selected )
Maximum ext. input @ 50 Ohms  ±5 V DC or 5Vrms
Maximum ext. input @ 1 MOhms  400 Vmax ( DC + peak AC < 5 kHz )
Automatic setup
Auto Setup  Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals 
Vertical Find  Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range
Probes 
Model PP006 10 : 1, 10 MOhms with auto-detect (one per channel)
Probe System: Probus®  Automatically detects and supports a wide variety of differential amplifiers; active, high-voltage, current, and differential probes
Scale Factors  Up to 12 automatically or manually selected
Color Waveform Display
Type  VGA color 8.4" flat-panel TFT-LCD 
Resolution  VGA 640 x 480 pixels
Screen Saver  Display blanks after 10 minutes (when screen saver is “on”)
Real Time Clock  Date, hours, minutes, and seconds displayed with waveform
Number of Traces  Display a maximum of eight traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles  Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY; Full Screen gives enlarged view of each style.
Intensity Controls  Separate intensity control for grids and waveforms
Waveform Styles  Sample dots joined or dots only — regular or bold sample point highlighting.
Trace Overlap Display  Select opaque or transparent mode with automatic waveform overlap management.
Analog Persistence Display
Analog & Color-Graded Persistence  Variable saturation levels; stores each trace’s persistence data in memory.
Trace Selection  Activate Analog Persistence on a selected trace, top 2 traces, or all traces.
Persistence Aging Time  Select from 500 ms to infinity.
Trace Display  Opaque or transparent overlap 
Sweeps Displayed  All accumulated or all accumulated with last trace highlighted
Zoom Expansion Traces
Display up to Four Zoom Traces   
  Vertical zoom up to 5X expansion, 50X with averaging

Horizontal zoom expand to 2 pts/div, magnify to 50000X

Auto Scroll automatically scans and displays any zoom or math trace.
Rapid Signal Processing
Processor  PowerPC
Processing Memory  Up to 128 Mbytes
Realtime Clock  Dates, hours, minutes, seconds and time stamp trigger time to 1 ns resolution
Internal Waveform Memory
Waveform  M1, M2, M3, M4 (Store full-length waveforms with 16 bits/data point)
Zoom and Math  Four traces A, B, C, D with chained trace capability 
Setup Storage
Front Panel and Instrument Status  Four non-volatile memories and floppy drive are standard. Hard drive and memory card are optional.
Interface
Remote Control  Full control of all front panel controls and internal functions via RS232C, GPIB, or Ethernet
RS-232-C  Asynchronous transfer rate of up to 115.2 kbaud
GPIB Port  Full control via IEEE – 4888.2; configurable as talker/listener for computer control and data transfer
Ethernet (optional)  10 BaseT Ethernet interface
Floppy Drive  Internal, DOS-format, 3.5" high-density
PC Card Slot (optional)  Supports memory and hard drive cards
External Monitor Port Standard  15-pin D-Type VGA-compatible 
Centronics Port  Parallel printer interface
Internal Graphics Printer (optional)  Provides hard copy output in <10 seconds
Outputs
Calibrator Signal  500 Hz – 1 MHz square wave or DC level; select from -1.0 to +1.0 Volt into 1 MOhms output on front panel test point and ground lug.
Control Signals  Rear Panel, TTL level BNC output; Choice of trigger ready, trigger out, pass/fail status. (output resistance 300 Ohms +- 10%)
Environmental and Safety
Operating Conditions
 		 

Temperature

5 – 40 °C rated accuracy
0 – 45 °C operating 
-20 – 60 °C non-operating

Humidity

80% max RH, non-condensing at 35 °C; Derates to 50% max RH, non-condensing at 45 °C

Altitude

4500 meters (15 000 feet) max. up to 25 °C; Derates to 2000 meters (6600 feet) at 45°C 
CE Approved
EMC  EMC Directive 89/336/EEC; EN 61326-1 Emissions and Immunity
Safety 
 		Low Voltage Directive 73/23/EEC; EN 61010-1 Product Safety (Installation Category II, Pollution Degree 2)
UL and cUL approved UL Standard UL 3111-1
cUL Standard CSA-C22.2 No. 1010-1 
General 
Auto Calibration  Ensures specified DC and timing accuracy is maintained for 1 year minimum
Auto Calibration time  <500 ms
Power Requirements 
 		90 – 132 VAC at 45 – 440 Hz
180 - 250 VAC at 45 - 66 Hz
Automatic AC voltage selection
Power Consumption: 150 - 230 VA depending on model
Battery Backup  Front panel settings retained for two years minimum
Warranty and Calibration  Three years; calibration recommended yearly
Physical Dimensions
Dimensions (HWD)  210 mm x 350 mm x 300 mm; 8.3" x 13.8" x 11.8" (height excludes feet)
Weight  18 lbs (8kg)
Shipping Weight  27 lbs. (12 kg)

 

Copyright © LeCroy Corporation 2008