VBAシリーズ

ビークル・バス・アナライザ

  • 最大4本のCANバスに対するシンボリック(アプリケーション層)デコード(ユーザーのメッセージで表示)
  • - CANトリガをシンボリック形式でセットアップ
  • - オシロスコープの画面上で波形の上にデコード結果を表示
  • - DBCデータベース形式との互換性
  • - ゲートウェイ上のタイミング測定 (ゲートウェイ上でCANメッセージ間のタイミングを測定)
  • - すべてのCANbus TDM、FlexRay TDP、LINbus TD機能をサポート
  • - CANタイミング測定、バス負荷測定
  • - FlexRay ver.2.1をサポート
  • - LIN ver1.3、2.x、J2602をサポート
  • - FlexRayアイパターン、マスク試験とエラーロケータ測定
  • - FlexRay物理層計測(伝播遅延、非対称遅延、トランケーション、ジッタ)
  • - 最高25Mポイントのメモリで
  • - 何千ものCAN、FlexRay、LINbusメッセージを捕捉

 
  •  
  •  
  •  
ビークル・バス・アナライザによる独自の解析

ビークル・バス・アナライザ(VBA)は、CANシリアル・データをシンボリック(アプリケーション層)にデコードできる最初の汎用オシロスコープです。VBAの登場により、エンジニアは初めて、CANプロトコル・スタック情報(シンボリック、16進、電気信号)を全ての層にわたって解析できると同時に、CANに影響を与えるインサーキット電気信号(センサー入力、電圧レベル、過渡電圧など)を詳細に表示できるようになりました。さらに、最大4個の異なるCANの信号を同時にデコードできます。オシロスコープの標準ツールと特殊ツールを使用して、デザインの確認とデバッグを行うこともできます。

ページトップに戻る

高速デバッグを妨げる障壁の除去

意味が分かるシンボリック・デコーディング/トリガリングでは、イベントを高速かつ直感的に分析することが可能です。既存のDBCデータベース・ファイルをオシロスコープに読み込み(データの再入力は不要)、CANメッセージ・トラフィックを捕捉すると、すべての電気信号、プロトコル(16進)情報、シンボリック(アプリケーション層)情報が即座にオシロスコープの画面に表示されます。

オシロスコープの標準ツールとVBAの特殊ツールを使用して、希なイベントの検出、測定の自動実行とイベント・タイミングの統計解析、情報(たとえば、抽出したCANメッセージ・データ)のグラフ表示/プロットなどを行うことができます。

 

ページトップに戻る

単一の統合ツールによる生産性の向上

VBAは、すべての情報を同じ画面で確認できます。VBAにより、複数のゲートウェイにわたるタイミング測定が可能になりました。高速かつ直感的な分析ができます。使い慣れた操作で、すべてのECUまたは回路動作を時系列に従って、詳細かつ簡単に分析できます。時間のかかる分析や問題解決は既に過去のものとなりました。

ページトップに戻る

ユニークな測定ツール

VBAを使用すると、他の機器では不可能な数多くの測定が可能になります。VBAでは、タイミング測定を実行するほかにも、CANメッセージ・ストリームからCANデータを抽出し、そのCANデータをオシロスコープの画面上にグラフィック形式でプロットして、個々のCANデータを他の電気信号と比較することができます。この例では、ステアリング角度とステアリング角度変化率をCANメッセージ捕捉から抽出し、それらのデータを10進数に変換した後、 VBAの画面上に時系列トラックとしてプロットしています。


拡大画像

ページトップに戻る

基本仕様
ビークル・バス・アナライザ(WaveRunner Xi-Aベースモデル 、CANBus TDMFlexRaybus TDPLINbus TDから構成されています。)
モデル名 帯域 ch数 サンプリング速度 標準メモリ
VBA 44Xi-A 400MHz 4ch 5GS/s 12.5Mポイント
VBA 64Xi-A 600MHz 4ch 5GS/s 12.5Mポイント
VBA 104Xi-A 1GHz 4ch 5〜10GS/s 12.5Mポイント
VBA 204Xi-A 2GHz 4ch 5〜10GS/s 12.5Mポイント

* ユーザ各位のご要望、当社の品質管理の一層の高度化などにともなって、
おことわりなしに仕様の一部、価格を変更させていただくことがあります。

モデルごとスペック詳細(モデル名をクリックで詳細表示されます) 

VBA 44Xi-A スペック

Vertical System

Analog Bandwidth @ 50 Ω (-3 dB) 400 MHz
Rise Time (typical) 875 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 16 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range 50 Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div, ±100 V @ 1.02 V/div–10 V/div
 

Horizontal System

Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
 

Acquisition System

Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 5 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 200 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
 

Acquisition Processing

Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 200 ps (5 GS/s)
 

Triggering System

Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 400 MHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 400 MHz @ = 10 mV
 

Basic Triggers

Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
 

SMART Triggers

State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
 

SMART Triggers with Exclusion Technology

Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
 

Color Waveform Display

Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
 

Internal Waveform Memory

Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
 

Probes

Probes One PP008 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
 

Setup Storage

Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
 

Auxiliary Input

Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
 

Auxiliary Output

Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
 

General

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
 

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
 

Physical Dimensions

Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
 

Certifications

Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
 
VBA 64Xi-A スペック

Vertical System

Analog Bandwidth @ 50 Ω (-3 dB) 600 MHz
Rise Time (typical) 625 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 16 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range 50 Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div, ±100 V @ 1.02 V/div–10 V/div
 

Horizontal System

Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy = 5 ppm @ 25 °C (typical) (= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
 

Acquisition System

Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 10 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 200 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
 

Acquisition Processing

Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 100 ps (10 GS/s)
 

Triggering System

Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 600 MHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 600 MHz @ = 10 mV
 

Basic Triggers

Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
 

SMART Triggers

State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
 

SMART Triggers with Exclusion Technology

Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
 

Color Waveform Display

Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
 

Internal Waveform Memory

Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
 

Probes

Probes One PP008 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
 

Setup Storage

Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
 

Auxiliary Input

Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
 

Auxiliary Output

Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
 

General

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
 

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
 

Physical Dimensions

Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
 

Certifications

Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
 
VBA 104Xi-A スペック

Vertical System

Analog Bandwidth @ 50 Ω (-3 dB) 1 GHz
Rise Time (typical) 400 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 20 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range ±400 mv@2–4.95 mv/div, ±1 V@5–99 mv/div, ±10 V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div; 1 M Ω: ±400 mv @ 2–4.95 mv/div, ±1 V @ 5–99 mv/div, ±10V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div
 

Horizontal System

Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
 

Acquisition System

Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 10 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 100 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
 

Acquisition Processing

Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 100 ps (10 GS/s)
 

Triggering System

Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 1 GHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 1 GHz @ = 10 mV
 

Basic Triggers

Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
 

SMART Triggers

State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
 

SMART Triggers with Exclusion Technology

Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
 

Color Waveform Display

Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
 

Internal Waveform Memory

Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
 

Probes

Probes One PP007 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
 

Setup Storage

Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
 

Auxiliary Input

Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
 

Auxiliary Output

Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
 

General

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
 

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
 

Physical Dimensions

Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
 

Certifications

Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
 
VBA 204Xi-A スペック

Vertical System

Analog Bandwidth @ 50 Ω (-3 dB) 2 GHz
Rise Time (typical) 225 ps
Input Channels 4
Bandwidth Limiters 20 MHz; 200 MHz
Input Impedance 1 MΩ || 20 pF or 50 Ω
Input Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
Input Connector ProBus/BNC
Vertical Resolution 8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity 50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
DC Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale, = 10 mV/div (warranted)
Offset Range ±400 mv@2–4.95 mv/div, ±1 V@5–99 mv/div, ±10 V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div; 1 M Ω: ±400 mv @ 2–4.95 mv/div, ±1 V @ 5–99 mv/div, ±10V @ 100 mv–1 V/div, ±100V @ 1.02–10 V/div
 

Horizontal System

Timebases Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy <= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy Equal to Clock Accuracy
Channel-Channel Deskew Range ±9 x time/div setting, 100 ms max., each channel
External Clock DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi), (minimum rise time and amplitude requirements apply at low frequencies)
Roll Mode User selectable at = 500 ms/div and = 100 kS/s
 

Acquisition System

Single-Shot Sample Rate/Ch 5 GS/s
Interleaved Sample Rate (2 Ch) 10 GS/s
Random Interleaved Sampling (RIS) 200 GS/s
RIS Mode User selectable from 100 ps/div to 10 ns/div
Maximum Trigger Rate 1,250,000 waveforms/second
Intersegment Time 800 ns
Acquisition Memory Options Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi) Segments (Sequence Mode)
Acquisition Memory Options - Standard (4 Ch / 2Ch) 12.5M/25M 10,000
Sequence Time Stamp Resolution 1 ns
 

Acquisition Processing

Averaging Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES) From 8.5 to 11 bits vertical resolution
Envelope (Extrema) Envelope, floor, or roof for up to 1 million sweeps
Interpolation Linear or (Sinx)/x
Time Resolution (min, Single-shot) 100 ps (10 GS/s)
 

Triggering System

Trigger Modes Normal, Auto, Single, Stop
Sources Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay 0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time 1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range EXT/10 ±4 V; EXT ±400 mV
Trigger Sensitivity with Edge Trigger (Ch 1–4) 2 div @ < 2 GHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger 2 GHz @ = 10 mV
 

Basic Triggers

Edge Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
 

SMART Triggers

State or Edge Qualified Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
 

SMART Triggers with Exclusion Technology

Glitch and Pulse Width Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified) Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering Trigger on intermittent faults by specifying the normal width or period.
 

Color Waveform Display

Type Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation Sample dots joined or dots only in real-time mode
 

Internal Waveform Memory

Internal Waveform Memory M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
 

LeCroy WaveStream™ Fast Viewing Mode

Intensity 256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels up to 4 simultaneously
Max Sampling Rate 5 GS/s (10 GS/s for WaveRunner 62Xi, 64Xi, 104Xi, 204Xi in interleaved mode)
Waveforms/second (continuous) up to 8000 waveforms/second
Operation Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
 

Automatic Setup

Auto Setup Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Find Vertical Scale Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
 

Probes

Probes One PP007 per channel standard; Optional passive and active probes available.
Probe System: ProBus Automatically detects and supports a variety of compatible probes.
Scale Factors Automatically or manually selected, depending on probe used
 

Zoom Expansion Traces

Zoom Expansion Traces Display up to 4 Zoom/Math traces with 16 bits/data point
 

Setup Storage

Setup Storage Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
 

Interface

Remote Control Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional) Supports IEEE – 488.2
Ethernet Port 10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host) 5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port DB-9 RS-232 port (not for remote oscilloscope control)
 

Auxiliary Input

Signal Types Selected from External Trigger or External Clock input on front panel
Coupling 50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 250 V max. (DC + Peak AC = 10 kHz)
 

Auxiliary Output

Signal Types Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal TTL, ˜3.3 V
Calibrator Signal Output available on front panel connector provides a variety of signals for probe calibration and compensation.
 

General

Auto Calibration Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements 90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi
 

Environmental and Safety

Temperature (Operating) +5 °C to +40 °C
Temperature (Non-Operating) -20 °C to +60 °C
Humidity (Operating) Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating) 5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating) Operating Up to 2,000 m
Altitude (Non-Operating) Non-Operating 12,190 m
 

Physical Dimensions

Dimensions (HWD) 260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight 6.95 kg. (15.5 lbs.)
 

Certifications

Certifications CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty, upgrades, calibration, and customization services.
 

VBA スペック詳細 (PDF:700K)

Serial Data Compliance

QPHY-ENET
QualiPHY Ethernet Application Software
QPHY-USB
USB Application Software Package
ENET-2ADA-BNCSMA
2 x BNC to SMA Adapter
ENET-2CAB-SMA018
2 x 18 inch SMA to SMA Cable
ENET-2CAB-SMA036
2 x 36 inch SMA to SMA Cable
ET-PMT
Pulse Mask Test Package
WRXi-SDM
Serial Data Mask Package
TF-ENET-B
10/100/1000Base-T Compliance Test Fixture
TF-ET
Telecom Adaptor Kit 100Ω, 120Ω, 75Ω
TF-USB-B
USB 2.0 Testing Compliance Test Fixture

Remote Control/Network Options

WS-GPIB
USB2.0 to GP-IB IEEE488.2 Adapter

Serial Trigger and Decode

WRXI-SPIBUS TD
SPI Trigger and Decode Option
WRXI-I2CBUS TD
I2C Trigger and Decode Option
WRXi-UART-RS232BUS TD
UART and RS232 Bus Trigger & Decode Opt. for WRXi Oscilloscopes
WRXI-LINBUS TD
LIN Bus Trigger & Decode Opt. for WRXi Oscilloscopes
WRXI-FLEXRAYBUS TD
FlexRay Trigger and Decode Option
WRXi-FlexRaybus TDP
FlexRay Trigger, Decode and Physical Layer Test Option for WRXi
WRXi-CANbus TDM
CAN Trigger, Decode and Measure/Graph Option for WaveRunner Xi
WRXi-CANbus TD
CAN Trigger, Decode Option for WaveRunner Xi
WRXi-AudioBus TD
AudioBus trigger and decode for WaveRunner Xi
WRXi-AudioBus TDG
AudioBus trigger, decode, and graph for WaveRunner Xi
WRXi-1553 TD
MIL-STD-1553 Trigger and decode option for WaveRunner Xi
CANbus TD
LeCroy CAN Bus Trigger and Decoding Package
CANbus TDM
LeCroy CAN Bus TDM Trigger, Decoding and Measurement Package
CANbus TD 5LIC
LeCroy CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes
CANbus TDM-5LIC
LeCroy CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes
TC1041-OPTO
CAN 1041 opto-isolated high-speed trigger coupler
TC1050-OPTO
CAN 1050 opto-isolated high-speed trigger coupler
TC1054-OPTO
CAN 1054 opto-isolated low-speed trigger coupler
TC251-OPTO
CAN 251 opto-isolated high-speed triger coupler
TC5790c-OPTO
CAN 5790c opto-isolated single-wire trigger coupler
TC10011-OPTO
CAN B10011S opto-isolated truck and bus trigger coupler

Mixed Signal Solutions

MS-500
500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option
MS-500-36
250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option
MS-250
250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option

Mixed Signal Accessories

PK400-1
Large gripper probe set for 0.10'' (2.54 mm) pin pitch, includes 10 probes with color-coded leads
PK400-2
Medium gripper probe set for 0.04'' (1.0 mm) pin pitch, includes 10 probes with color-coded leads
PK400-3
Small gripper probe set for 0.008'' (0.2 mm) pin pitch, includes 10 probes with color-coded leads
MSO-MICTOR
Mictor Cable, D0-D35
MSO-3M
3M Interconnect Cable, D0-D17 or D18-D35

Jitter Analysis Software

WRXi-JTA2
Jitter & Timing Analysis Software

Other Software Options

WRXi-SPECTRUM
Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series
WRXi-EMC
EMC Software Option
WRXi-STAT
WaveRunner Xi Series Statistics Package
WRXi-XMATH
Advanced Math Package
WRXi-XDEV
Advanced Customization Package
WRXi-XMAP
Master Analysis Package (XMATH + XDEV + JTA2)
WRXi-XWAV
Intermediate Math Package
WRXi-XVAP
Value Analysis Package ( XWAV + JTA2)
WRXi-XWEB
Processing Web Editor for functions and parameters

Data Storage Software

WRXi-AORM
Advanced Optical Recording Measurements
WRXi-DDM2
Disk Drive Measurement Package

Power Analysis Software

WRXi-PMA2
Power Measure Analysis Software Package

Digital Filtering Software

WRXi-DFP2
Digital Fiter Package

Miscellaneous

WRXi-SOFTCASE
Soft Carrying Case
WRXi-HARDCASE
Hard Transit Case
WRXi-KYBD
Mini Keyboard
WRXi-RACK
WaveRunner Xi Series Rackmount Accessory Kit
WRXi-MS-CLAMP
WaveRunner Xi Series Clamp Mounting Stand
WRXi-A-FP-GERMAN
WRXi-A German Front Panel Overlay
WRXi-A-FP-FRENCH
WRXi-A French Front Panel Overlay
WRXi-A-FP-ITALIAN
WRXi-A Italian Front Panel Overlay
WRXi-A-FP-SPANISH
WRXi-A Spanish Front Panel Overlay
WRXi-A-FP-JAPANESE
WRXi-A Japanese Front Panel Overlay
WRXi-A-FP-KOREAN
WRXi-A Korean Front Panel Overlay
WRXi-A-FP-CHNES-TR
WRXi-A Chinese (Traditional) Front Panel Overlay
WRXi-A-FP-CHNES-SI
WRXi-A Chinese (Traditional) Front Panel Overlay
WRXi-A-FP-RUSSIAN
WRXi-A Russian Front Panel Overlay

ページトップに戻る

Active Voltage Probes

ZS1500-QUADPAK
Set of 4 ZS1500 Active Probes
ZS1000-QUADPAK
Set of 4 ZS1000 Active Probes
ZS1500
1.5 GHz, 1 MΩ, 0.9 pF Active Probe
ZS1000
1 GHz, 1 MΩ, 0.9 pF Active Probe
HFP1000
1 GHz Active Voltage Probe
HFP1500
1.5 GHz Active Voltage Probe
HFP2500
2.5 GHz Active Voltage Probe

Current Probes

CP030
30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse
CP031
30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse
AP015
30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse
CP150
150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak Pulse
CP500
500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak
DCS015
Deskew Calibration Source for AP015

Differential Amplifiers

DA1855A
DA1855A, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters
DXC100A
DXC100A, Selectable ÷100 or ÷10 , Passive Differential Probe Pair for DA18xxA series
DXC200
÷1,50 MHz low capacitance Passive Differential Probe Pair for DA18xxA series
DXC-5100
÷100 2.5KV Passive High Voltage Probe Pair for DA18xxA series. Requires DA101 for full performance
DA101
÷10 1MOhm Passive Attenuator for DXC series probes
DA1855A-PR2
2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters
DA1855A-PR2-RM
Rack mountable version of the DA1855A-PR2
DA1855A-RM
DA1855A with rackmount
 

Differential Probes

D320
WaveLink 3.5 GHz Differential probe module 5V
AP034
1 GHz Active Differential Probe
D310
WaveLink 3.5 GHz Differential probe module 2.5V
WL-Pbus
WaveLink ProBus probe body = 3.5 GHz
AP033
500 MHz Active Differential Probe

High Voltage Probes

PPE1.2KV
10:1/100:1 200/300 MHz 5M Ohm/50M Ohm
PPE2KV
100:1 400 MHz 50M Ohm High Voltage Probe
PPE4KV
100:1 400 MHz 50M Ohm High-Voltage Probe
PPE5KV
100:1 400 MHz 50M Ohm High-Voltage Probe
PPE6KV
1000:1 400 MHz 50M Ohm High-Voltage Probe
PPE20KV
1000:1 100 MHz 100M Ohm High-Voltage Probe

High Voltage Differential Probes

ADP300
High-Voltage Active Differential Probe
ADP305
High-Voltage Differential Probes From LeCroy

Passive Probes

PP007-WR-1
Passive Probe, 500 MHz, 2.5mm tip

Probe Parts and Kits

D350ST
WaveLink 4 GHz, 5 V Differential with Small Tip Module
D320-PT
WaveLink D320 3.5 GHz/5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx20-PT Adjustable Positioner Tip. 4.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2).
D310-PT
WaveLink D310 3.5 GHz/2.5Vp-p and +/-3V Offset Range Differential Amplifier Small Tip Module with Dx10-PT Adjustable Positioner Tip. 2.8 mVrms (typical) probe + scope noise. Includes XYZ Positioner Assembly with Mechanical Interconnects, Adhesive Kit, Connection Guides, Hand-held Wand, and Replacement Pins (Qty. 4)/Sockets(Qty. 2).
D300A-AT
WaveLink 4 GHz Differential Probe with Adjustable Tip Module

ページトップに戻る