 WaveSurfer MXs-Bシリーズ驚異的な表現力と使いやすさを両立した
【標準搭載】
操作性 WaveSurfer MXs-Bの操作機能とインタフェースは、多忙なエンジニアに、効率的かつスムーズで使いやすいGUIを提供します。例えば、ラント波形にトリガをかける場合や、異常波形を検出する場合も、ほとんどの汎用測定をワンタッチで実行できます。また、WindowsXP環境によるコネクティビティでビジネス・アプリケーションへも高い親和性があります。WaveSurfer MXs-Bは、まさに快適な操作性と効率化を実現するオシロスコープです。
スムーズなカーソル操作従来機と比較して、カーソル機能を強化しました。 カーソル専用ノブはもちろん、「タイプ」ボタンを使用すれば、 カーソルの種類を即座に変更できます。カーソルの位置や種類は、 任意の信号チャンネル、ズーム波形、演算トレースのどれにでも適用できます。 これはWaveSurfer MXs-Bをはじめレクロイ・オシロスコープのユニークな機能です。
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
簡単なズーム操作と演算
| モデル名 | 帯域 | ch数 | サンプリング速度 | 標準メモリ | 価格（税別） |
|---|---|---|---|---|---|
| WaveSurfer 24MXs-B | 200MHz | 4ch | 2.5GS/s | 16Mポイント | 97万円 |
| WaveSurfer 42MXs-B | 400MHz | 2ch | 5GS/s | 16Mポイント | 98万円 |
| WaveSurfer 44MXs-B | 400MHz | 4ch | 5GS/s | 16Mポイント | 102万円 |
| WaveSurfer 62MXs-B | 600MHz | 2ch | 5〜10GS/s | 16Mポイント | 113万円 |
| WaveSurfer 64MXs-B | 600MHz | 4ch | 5〜10GS/s | 16Mポイント | 133万円 |
| WaveSurfer 104MXs-B | 1GHz | 4ch | 5〜10GS/s | 16Mポイント | 161万円 |
|
* 価格は2011年12月15日現在のものです。 |
|||||
モデルごとスペック詳細（モデル名をクリックで詳細表示されます）
WaveSurfer 24MXs-B スペック
Vertical System |
|
| Bandwidth | 200 MHz |
| Rise time | 1.75 ns |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz |
| Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 52 dB at 100 MHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 2.5 GS/s |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Hold-off by Time | 1 ns - 20 s |
| Internal Trigger Range | ±4.1 divisions from center |
| Trigger Sensitivity | 1.0 division: 200 MHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 100 mV from 10 MHz to 200 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 200 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 340 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
WaveSurfer 42MXs-B スペック
Vertical System |
|
| Bandwidth | 400 MHz |
| Rise time | 875 ps |
| Input Channels | 2 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 52 dB at 100 MHz ≥ 40 dB at 400 MHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 5 GS/s |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 2, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Trigger Sensitivity | 1.0 division: 200 MHz 2.0 division: 400 MHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 150 mV from 10 MHz to 400 MHz Ext/10: 0.5 V from DC to 10 MHz 1.5 mV from 10 MHz to 400 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (2) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 290 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
WaveSurfer 44MXs-B スペック
Vertical System |
|
| Bandwidth | 400 MHz |
| Rise time | 875 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 52 dB at 100 MHz ≥ 40 dB at 400 MHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 5 GS/s |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Trigger Sensitivity | 1.0 division: 200 MHz 2.0 division: 400 MHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 150 mV from 10 MHz to 400 MHz Ext/10: 0.5 V from DC to 10 MHz 1.5 mV from 10 MHz to 400 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 340 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
WaveSurfer 62MXs-B スペック
Vertical System |
|
| Bandwidth | 600 MHz |
| Rise time | 525 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 52 dB at 100 MHz ≥ 30 dB at 600 MHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 10 GS/s on 1 Ch 5 GS/s on 2 Ch |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Trigger Sensitivity | 1.0 division: 200 MHz 2.0 division: 600 MHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 200 mV from 10 MHz to 600 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 600 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 340 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
WaveSurfer 64MXs-B スペック
Vertical System |
|
| Bandwidth | 600 MHz |
| Rise time | 525 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ± 1.0% || 16 pF ± 2 pF, 50 Ω ± 1.0% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 52 dB at 100 MHz ≥ 30 dB at 600 MHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 10 GS/s on 2 Ch 5 GS/s on 4 Ch |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Trigger Sensitivity | 1.0 division: 200 MHz 2.0 division: 600 MHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 200 mV from 10 MHz to 600 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 600 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 340 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
WaveSurfer 104MXs-B スペック
Vertical System |
|
| Bandwidth | 1 GHz |
| Rise time | 350 ps |
| Input Channels | 4 |
| Bandwidth Limiters | 20 MHz, 200 MHz |
| Input Impedance | 1 MΩ ± 1.25% || 16 pF ± 2 pF, 50 Ω ± 1.5% |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 1 MΩ: ± 250 Vpk, 50 Ω: 5 VRMS |
| Channel-Channel Isolation | ≥ 40 dB at 100 MHz ≥ 30 dB at 1 GHz |
| Vertical Resolution | 8 bits |
| Sensitivity | 1 MΩ: 2 mV/div - 10 V/div 50 Ω: 2 mV/div - 1 V/div |
| DC Gain Accuracy | ±1.5% |
| Offset Range | ±1 V: 2 mV/div - 99 mV/div ±10 V: 100 mV/div - 1.0 V/div ±100 V: 1.02 V/div - 10 V/div |
Horizontal System |
|
| Time/Division Range | 200 ps/div - 1000 s/div |
| Clock Accuracy | 5 ppm |
| Trigger and Interpolator Jitter | 3 ps (rms) |
Acquisition System |
|
| Single-Shot Sample Rate/Ch | 10 GS/s on 2 Ch 5 GS/s on 4 Ch |
| Equivalent Sample Rate | 50 GS/s |
| Memory | 32 Mpts/Ch on 2 Ch 16 Mpts/Ch on 4 Ch |
Acquisition Processing |
|
| Averaging | Up to 1,000,000 |
| Peak Detect | na |
| Enhanced Resolution (ERES) | Up to 11 bits |
| Interpolation | Linear, Sin x/x |
| Sequence Mode | Up to 5,000 segments |
Triggering System |
|
| Modes | Normal, Auto, Single, Stop |
| Sources | Ch 1 - Ch 4, EXT, EXT/10, AC Line |
| Coupling Mode | AC, DC, LF Rej, HF Rej, |
| Pre-trigger Delay | 0 - 100% Full Scale |
| Post-trigger Delay | 0 - 10,000 Divisions |
| Trigger Sensitivity | 1.0 division: 200 MHz 1.5 divisions: 600 MHz 2.0 divisions: 1 GHz |
| External Trigger Sensitivity | Ext: 50 mV from DC to 10 MHz 200 mV from 10 MHz to 600 MHz Ext/10: 0.5 V from DC to 10 MHz 2.0 mV from 10 MHz to 600 MHz |
| External Trigger Input Range | Ext: ±0.4 V, EXT/10: ±4.0 V |
Display |
|
| Type | Color Touch Screen 10.4" TFT-LCD |
| Resolution | SVGA: 800 x 600 |
| Grid Styles | YT, XY |
Trigger Types |
|
| Standard Triggers | Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV), Runt, Slew Rate, Interval, Dropout, Qualified |
| Optional Advanced Triggers | na |
| Optional Serial Data Triggers | I2C, SPI, UART/RS-232, CAN, LIN, FlexRay, MIL-STD-1553, ARINC 429, Audio (I2S, LJ, RJ, TDM), USB, MIPI D-PHY, DigRF3G |
Internal Storage |
|
| Waveform Storage | 4 memory waveforms plus internal HDD |
| Setup Storage | 6 setups |
Math |
|
| Standard Math Functions | Add, Subtract, Multiply, Divide, FFT, Absolute Value, Averaging (summed and continuous), Derivative, Envelope, Enhanced Resolution, Floor, Integral, Invert, Reciprocal, Rescale, Roof, Square, Square Root |
| Optional Math Functions | na |
Measurements |
|
| Measurement Parameters | Ampltidue, Area, Base, Delay, Duty Cycle, Fall Time (90% - 10%), Fall Time (80% - 20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10% - 90%), Rise Time (20% - 80%), RMS, Skew, Standard Deviation, Top, Width+, Width- |
Probes |
|
| Probes | Qty. (4) ÷10 Passive Probes |
| Scale Factors | Automatic/Manual: ÷1, ÷10, ÷20, ÷100,
÷200, ÷1000, ÷2000, ÷10000 Variable: (÷1x10-6 - ÷10000) |
| Calibration Output | 1 kHz square wave, 1.0 Vp-p, output to probe hook |
Interface |
|
| GPIB Port (optional) | 1 (optional) |
| USB (Device) | 0 |
| Ethernet Port | 1 |
| USB (Host) | 5 |
| Serial Port | 1 |
Power Requirements |
|
| Voltage | 90 - 264 VAC, 47 HZ - 63 Hz 90 - 132 VAC, 380 HZ - 420 Hz |
| Max. Power Consumption | 340 VA |
Environmental and Safety |
|
| Temperature (Operating) | 5 °C to 40 °C |
| Temperature (Non-Operating) | -20 °C to 60 °C |
| Humidity (Operating) | 80% RH, 31 °C 50% RH, 40 °C |
| Humidity (Non-Operating) | 95% RH |
| Altitude (Operating) | 2000 m |
| Altitude (Non-Operating) | 12,192 m |
Physical Dimensions |
|
| Dimensions (HWD) | 260 mm x 340 mm x 152 mm (10.25" x 13.4" x 6") |
| Weight | 7.26 kg. (16.0 lbs.) |
Serial Trigger and Decode |
|
WSXs-USB2-HSICbus D USB 2.0 HSIC Decode Option |
|
WSXs-DigRFV4bus D DigRF V4 Bus Decode option for WaveSurfer Xs series |
|
WSXs-AUTO CAN, LIN and FlexRay Trigger and Decode Package |
|
WSXs-EMB I2C, SPI, UART and RS-232 Trigger and Decode Package |
|
WSXs-FlexRaybus TD FlexRay Trigger and Decode Option for WaveSurfer Xs |
|
WSXS-1553 TD MIL-STD-1553 Trigger and decode option for WaveSurfer Xs |
|
WSXs-ARINC429bus DSymbolic ARINC 429 Bus Symbolic Decode option for WaveSurfer Xs |
|
WSXs-AudioBus TD AudioBus trigger and decode option for WaveSurfer Xs |
|
WSXs-CANbus TD CAN Trigger and Decode Option for WaveSurfer Xs |
|
WSXs-DigRF3Gbus D DigRF 3G Bus Decode option for WaveSurfer Xs |
|
WSXS-I2CBUS TD I2C Bus Trigger and Decode Option for WaveSurfer Xs |
|
WSXS-LINBUS TD LIN Bus Trigger & Decode Option for WaveSurfer Xs Series Oscilloscopes |
|
WSXS-SPIBUS TD SPI Bus Trigger & Decode Option for WaveSurfer Xs |
|
WSXS-UART-RS232BUS TD UART and RS232 Bus Trigger and Decode Option for WaveSurfer Xs |
|
WSXs-USB2bus D USB 2.0 Bus Decode option for WaveSurfer Xs |
Miscellaneous |
|
WSXs-KYBD Keyboard Accessory |
|
WSXs-MOUSE Optical Mouse Accessory |
|
WSXs-HARDCASE Hard Carrying Case |
|
WSXs-SOFTCASE Soft Carrying Case |
|
WSXs-RACK Rack Mount Accessory |
|
WSXs-POUCH Accessory Pouch |
|
WSXs-MS-CLAMP Clamp Mounting Stand |
|
WSXs-A-FP-GERMAN German Front Panel Overlay |
|
WSXs-A-FP-FRENCH French Front Panel Overlay |
|
WSXs-A-FP-ITALIAN Italian Front Panel Overlay |
|
WSXs-A-FP-SPANISH Spanish Front Panel Overlay |
|
WSXs-A-FP-JAPANESE Japanese Front Panel Overlay |
|
WSXs-A-FP-KOREAN Korean Front Panel Overlay |
|
WSXs-A-FP-CHNES-TR Chinese (Tr) Front Panel Overlay |
|
WSXs-A-FP-CHNES-SI Chinese (Simp) Front Panel Overlay |
|
WSXs-A-FP-RUSSIAN Russian Front Panel Overlay |
Remote Control/Network Options |
|
WS-GPIB USB 2.0 to GPIB IEEE-488.2 Adapter |
|
USB2-GPIB External USB 2.0 to GPIB IEEE 488.2 adapter |
Mixed Signal Solutions |
|
MS-500 500 MHz Maximum Input Frequency, 18 Channels, 50 Mpts/ch Mixed Signal Oscilloscope Option |
|
MS-500-36 250 MHz Maximum Input Frequency, 36 Channels, 25 Mpts/ch Mixed Signal Oscilloscope Option |
|
MS-250 250 MHz Maximum Input Frequency, 18 Channels, 10 Mpts/ch Mixed Signal Oscilloscope Option |
Mixed Signal Accessories |
|
PK400-1 Large gripper probe set for 0.10'' (2.54 mm) pin pitch, includes 10 probes with color-coded leads |
|
PK400-2 Medium gripper probe set for 0.04'' (1.0 mm) pin pitch, includes 10 probes with color-coded leads |
|
PK400-3 Small gripper probe set for 0.008'' (0.2 mm) pin pitch, includes 10 probes with color-coded leads |
|
MSO-MICTOR Mictor Cable, D0-D35 |
|
MSO-3M 3M Interconnect Cable, D0-D17 or D18-D35 |
Serial Data Test Fixtures |
|
TF-ET Telecom Adaptor Kit 100Ω, 120Ω, 75Ω |
Active Voltage Probes |
|
ZS1500-QUADPAK Set of 4 ZS1500 Active Probes |
|
ZS1000-QUADPAK Set of 4 ZS1000 Active Probes |
|
ZS1500 1.5 GHz, 1 MΩ, 0.9 pF Active Probe |
|
ZS1000 1 GHz, 1 MΩ, 0.9 pF Active Probe |
|
HFP1000 1 GHz Active Voltage Probe |
|
HFP1500 1.5 GHz Active Voltage Probe |
Current Probes |
|
CP030 30 Amps, 50 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse |
|
CP031 30 Amps, 100 MHz BW Current Probe - AC/DC , 50 Amp Peak Pulse |
|
AP015 30 Amps, 50MHz BW Current Probe - AC/DC, 50 Amp Peak Pulse |
|
CP150 150 Amps, 10 MHz BW Current Probe - AC/DC , 500 Amp Peak Pulse |
|
CP500 500 Amps, 2 MHz BW Current Probe - AC/DC , 700 Amp Peak |
|
DCS015 Deskew Calibration Source for AP015 |
Differential Amplifiers |
|
DA1855A DA1855A, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters |
|
DXC100A DXC100A, Selectable ÷100 or ÷10 , Passive Differential Probe Pair for DA18xxA series |
|
DXC200 ÷1,50 MHz low capacitance Passive Differential Probe Pair for DA18xxA series |
|
DXC-5100 ÷100 2.5KV Passive High Voltage Probe Pair for DA18xxA series. Requires DA101 for full performance |
|
DA101 ÷10 1MOhm Passive Attenuator for DXC series probes |
|
DA1855A-PR2 2 Ch, 100 MHz Differential Amplifier with fast over drive recovery, calibrated offset, and selectable LP filters |
|
DA1855A-PR2-RM Rack mountable version of the DA1855A-PR2 |
Differential Probes |
|
ZD1500 1.5 GHz, 1.0 pF Active Differential probe |
|
ZD1000 1 GHz, 1.0 pF Active Differential probe |
|
ZD500 500 MHz, 1.0 pF Active Differential probe |
|
ZD200 200 MHz, 3.5 pF, 1 MOhm Active Differential probe |
|
AP034 1 GHz Active Differential Probe |
|
AP033 500 MHz Active Differential Probe |
High Voltage Probes |
|
PPE1.2KV 10:1/100:1 200/300 MHz 5M Ohm/50M Ohm |
|
PPE2KV 100:1 400 MHz 50M Ohm High Voltage Probe |
|
PPE4KV 100:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE5KV 100:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE6KV 1000:1 400 MHz 50M Ohm High-Voltage Probe |
|
PPE20KV 1000:1 100 MHz 100M Ohm High-Voltage Probe |
High Voltage Differential Probes |
|
ADP300 High-Voltage Active Differential Probe |
|
ADP305 High-Voltage Differential Probes From LeCroy |
Probe Parts and Kits |
|
PACC-ZD001 Y Lead adapter, qty 1 |
|
PACC-ZD002 Solder in lead, qty 2 |
|
PACC-ZD003 Long spring ground, qty 2 |
|
PACC-ZD004 Tip Saver, qty 2 |
|
PACC-ZD005 Swivel tip adapter |
|
PACC-ZD006 Small IC adapter, qty 2 |
|
PACC-ZD007 Micro pogo pin tip, qty 6 |
|
PK111 ZD replacement kit |
;){kind=link}